Hitachi HSB32B26 Handleiding

Hitachi Speaker HSB32B26

Lees hieronder de 📖 handleiding in het Nederlandse voor Hitachi HSB32B26 (24 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 112 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

133W Bluetooth®SoundBar

Model:HSB40B16

Model:HSB32B26

Owner’sGuide

Thankyoufor purchasing thisHitachiproduct.Pleasereadtheseinstructionscarefully.

Youmaydownload,saveandprintthisOwner’sGuideforfuturereference.

Foradditionalassistance please call800.HITACHI(800.448.2244).

ForfurtherinformationonHitachiproducts,pleasevisitwww.hitachi.us/tv .

Revision021113

Table of Contents

Important Safety Instructions --------------------------------------------------------

Chapter 1 – Introduction and Placement ----------------------------------------------

Chapter 2 – Indicators and Buttons ---------------------------------------------

Chapter 3 – Quick Connect Guide -----------------------------------------------

Chapter 4 – Connecting the Sound Bar ---------------------------------------------------

Chapter 5 – Controlling the Sound ---------------------------------------------

Chapter 6 – Care and Service Information ------------------------------------

Chapter 7 -- Specifications -------------------------------------------------------------

Trademark Notices ---------------------------------------------------------------

Important Safety Instructions

SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI SOUND BAR

14. Refer all servicing to qualiﬁ ed service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

15. WARNING: To reduce the risk of ﬁ re or electric shock do not

expose this apparatus to rain or moisture.

16. Do not allow the product to output distorted

sound for an extended period of time. It may

cause speaker overheating and ﬁ re.

17. Sudden high volume sound may cause hearing

or speaker damage. Turn sound bar volume

down before connecting other devices.

18. Do not push objects through any opening in this unit,

as they may touch dangerous voltage points that could

result in ﬁ re or electric shock. Never spill or spray any

type of liquid into the unit.

19. Do not connect this unit to AC power using any device other

than the supplied AC adaptor and AC cord. This

could cause ﬁ re, electrical shock, or damage.

20. Do not use with a voltage other than the power voltage

speciﬁ ed. This could cause ﬁ re, electrical shock, or damage.

Connect to 120VAC, 60Hz power only.

21. If you need to replace the supplied AC adapter or AC cord,

contact the dealer from which you purchased the unit.

22. The Mains plug is used as the disconnect device,

and shall remain readily operable.

NOTICE ABOUT SOUND BAR PLACEMENT

Mounting the unit on a cabinet smaller than the length of the

unit could create a tip-over risk resulting in personal injury,

and product damage. Hitachi accepts no responsibility or

liability for any injuries or property damage resulting from

improper installation of this Sound Bar.

POWER SOURCE

This sound bar is designed to operate on 120 volts 60 Hz,

AC current from the supplied AC to DC external power

adapter. To prevent electric shock, do not use the plug with

an extension cord, receptacle, or other outlet unless the

blades and ground terminal can be fully inserted to prevent

blade exposure.

Never connect the AC adapter to 50 Hz, direct current, or

anything other than the speciﬁ ed voltage.

CAUTION NOTICE FOR 32" BASS PORTS

Never insert any object or liquids into the bass ports at each

end of the 32” Sound Bar (model HSB32B26).

Any such foreign object(s) will distort the

sound quality and may permanently

damage your Sound Bar. Such damage

is not covered by this product’s warranty.

Our reputation has been built on the quality, performance,

and ease of service of Hitachi products.

Safety is also foremost in our minds in the design of these

units. To help you operate these products properly, this

section illustrates safety tips which will be of beneﬁ t to you.

Please read it carefully and apply the knowledge you obtain

from it to the proper operation of your Hitachi sound bar.

The lightning ﬂ ash with arrowhead symbol, within

an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may

be of a sufﬁ cient magnitude to constitute a risk of

electric shock to a person.

The exclamation point within an equilateral triangle,

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

READ BEFORE OPERATING EQUIPMENT

Follow all warnings and instructions marked on this Sound

Bar.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including ampliﬁ ers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not ﬁ t into

your outlet, consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories speciﬁ ed

by the manufacturer.

12. Use only with the cart stand, tripod, bracket

or table speciﬁ ed by the manufacturer or sold

with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

Important Safety Instructions

CANADIAN RSS NOTICE

This device complies with Industry Canada RSS-210.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference, including

interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d’Industrie

Canada applicables aux appareils radio RSS-210.

L’exploitation est autorisée aux deux conditions

suivantes:

(1) l’appareil ne doit pas produire de brouillage, et

(2) l’utilisateur de l’appareil doit accepter tout brouillage

radio électrique subi, si le brouillage est susceptible d’en

compromettre le fonctionnement.

This device meets the exemption from the routine

evaluation limits in section 2.5 of RSS-102 and

compliance with RSS-102 RF exposure, users can obtain

Canadian information on RF exposure and compliance.

Le dispositif rencontre l’exemption des limites courantes

d’évaluation dans la section 2.5 de RSS-102 et la

confirmité á l’exposition de RSS-102 rf, utilisateurs peut

obtenir l’information Canadienne sur l’exposition et la

conformité de rf.

U.S. FEDERAL COMMUNICATIONS

COMMISSION NOTICE

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the

following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment

and receiver.

— Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV

technician for help.

MODIFICATIONS

FCC regulations state that any changes or modifications

made to this device that are not expressly approved by

Hitachi America, Ltd. may void the user’s authority to

operate the equipment .

CABLES

Connections to this device must be made with shielded

cables with metallic RFI/EMI connector hoods to maintain

compliance with FCC Rules and Regulations.

Any cables or power cords or power adapters supplied

with the system must be replaced with identical parts in

order to assure compliance.

You may order those replacement parts from Hitachi.

DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

For questions regarding this declaration, contact:

Hitachi America, Ltd.

900 Hitachi Way

Chula Vista, CA. 91914

800.448.2244 (800.HITACHI)

ATTN: Customer Relations

LEAD NOTICE

This product contains lead. Dispose of this product in

accordance with applicable environmental laws. For

product recycling and disposal information, contact your

local government agency or www.erecycle.org (in

California), the Electronic Industries Alliance at

www.eiae.org (in the U.S.) or the Electronic Product

Stewardship Canada at www.epsc.ca. (in Canada). For

more information, call 800.HITACHI.

This unit meets

ENERGY STAR for A/V

program requirements.

If no audio input signal has been detected for 30

minutes, this unit automatically powers down to save

you energy.

Press the Power button on the remote control or top

panel to wake the unit.

Product specificaties

Merk:	Hitachi
Categorie:	Speaker
Model:	HSB32B26

Heb je hulp nodig?

Als je hulp nodig hebt met Hitachi HSB32B26 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Speaker Hitachi

Hitachi BTN1 Handleiding

4 Mei 2023

Hitachi BTN5 Handleiding

9 April 2023

Hitachi AXS240BTU Handleiding

5 April 2023

Hitachi HSB32B26 Handleiding

27 Februari 2023

Hitachi SBW100 Handleiding

18 Januari 2023

Hitachi AXS014BTU Handleiding

14 Januari 2023

Hitachi HSB40B16 Handleiding

25 Oktober 2022

Handleiding Speaker

Nieuwste handleidingen voor Speaker

Braun LE03 Handleiding

23 November 2024

HK Audio L5-112X Handleiding

23 November 2024

Samson Rubicon R8a Handleiding

22 November 2024

Sony SS-SPG01 Handleiding

22 November 2024

Sony SS-MB200H Handleiding

22 November 2024

Sony SS-MB300H Handleiding

22 November 2024

JBL Studio 690 Handleiding

22 November 2024

JBL Studio 680 Handleiding

22 November 2024

Kramer Tavor 8-Sub Handleiding

21 November 2024

Kramer Galil 6-AW Handleiding

21 November 2024