Hikvision DS-PKA-WLM-433 Handleiding

Hikvision Toegangscontrolesysteem DS-PKA-WLM-433

Lees hieronder de 📖 handleiding in het Nederlandse voor Hikvision DS-PKA-WLM-433 (1 pagina's) in de categorie Toegangscontrolesysteem. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/1

3. Secure the mounng plate on the wall with four supplied

4. Rotate the keypad body clockwise to fasten the body on the

1. Loosen the set screws on boom of the keypad.

2. Rotate an-clockwise to remove the mounng plate.

It is required to insert the screw for tamper alarm.

5. Tighten the screw on the boom to ﬁx the keypad on the mounng

plate and complete the installaon.

Co., Ltd.

Any and all informaon, including, among others, wordings,

pictures, graphs are the properes of Hangzhou Hikvision

Digital Technology Co., Ltd. or its subsidiaries (hereinaer

referred to be “Hikvision”). This user manual (hereinaer

referred to be “the Manual”) cannot be reproduced,

changed, translated, or distributed, parally or wholly, by

any means, without the prior wrien permission of

Hikvision. Unless otherwise spulated, Hikvision does not

make any warranes, guarantees or representaons,

express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to Alarm Keypad.

The Manual includes instrucons for using and managing

the product. Pictures, charts, images and all other

informaon hereinaer are for descripon and explanaon

only. The informaon contained in the Manual is subject to

change, without noce, due to ﬁrmware updates or other

reasons. Please ﬁnd the latest version in the company

website (hp://overseas.hikvision.com/en/).

Please use this user manual under the guidance of

professionals.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE

AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND

ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A

PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD

PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS,

OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR

ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT

DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR

LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR

LOSS OF DATA OR

Trademarks Acknowledgement and other

Hikvision’s trademarks and logos are the properes of

Hikvision in various jurisdicons. Other trademarks and

logos menoned below are the properes of their

respecve owners.

DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS

PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE

USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.

HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR

ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER

DAMAGES RESULTING FROM CYBER ATTACK, HACKER

ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY

RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY

TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK

ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING

THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE

CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE

LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH

ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL

AND THE APPLICABLE LAW, THE LATER PREVAILS.

Enrollment

English

Diagram Reference

Product Information

Specification

Components and Indicaon

Installaon4

Operaon

Power On

2 4

Wireless Alarm Keypad

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized European

standards listed under the RE Direcve 2014/53/EU,

the EMC Direcve 2014/30/EU, the LVD Direcve

2014/35/EU, the RoHS Direcve 2011/65/EU.

2012/19/EU (WEEE direcve): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or

dispose of it at designated collecon points. For

more informaon see: www.recyclethis.info

The Input voltage should meet both the SELV (Safety

Extra Low Voltage) and the Limited Power Source

according to the IEC60950-1 standard. Please refer

to technical speciﬁcaons for detailed informaon.

Tamper Screw

Control

Panel

Power on the security control panel.

Make the control panel enter the

enrollment mode. Press the tamper

switch (on the board) of the keypad. The

paron indicators ﬂashes 4 mes when

the keypad is enrolled and ready for

work.

Note: The distance between the security

control panel and the keypad should be

less than 50 cm.

1. Loosen the set screws on boom of the keypad.

2. Remove the mounng plate.

3. Install four AA baeries according to the polarity mark.

Note: Do not reverse the polarity of the baery.

Check Signal Strength

Enter the signal checking mode by operang on the control panel.

Trigger the tamper alarm.

Power indicator ﬂashes 3 mes - Strong Signal

Fault indicator ﬂashes 3 mes - Weak Signal

Buzzer

1. Indicator

2. Tag Area

3. TAMPER Switch (on the board)

Power

Indicator Green

Blue

Orange

Red

Keypad Backlight White Keypad locked: flashes 2 times

Turn off if no operation for 5 s, turn on when touched

Normal Battery: Solid green for 2s (keypad waked up)

Low Battery：Flashing green flashes 3 times (keypad waked up)

Weak Signal Strength：Flashes 3 times

Strong Signal Strength：Flashes 3 times

Armed: Related LED flashes once, and light on 2 s while

the keypad is waked up

Disarmed/Alarm Cleared:Related LED flashes twice

Operation failed: Related LED flashes 3 times

Alarm: Related LED flashes 30s

Enrolled and Strats work: 4 LEDs flashes 4 times together

Patrol card presented: Power and Fault LEDs flashes 2 times

Zone/ Fire Alarm Triggered：Flashes 30s

No Alarm or Alarm Restored：Off

Partition

Indicator

Fault

Indicator

Alarm

Indicator

Present Tag/Tap Key/Armed

Disarmed

Operation Failed

Keypad Tampered

Card Enrolled

Zone Tampered

Fire Alarm

Beep Beep Beep

Beep Beep Beep Beep Beep

Beep

Long Beep (30 s)

Beep Beep

Formang

Remove the baery. Hold the TAMPER buon (with slend rod) and power

the keypad on at the same me. The power, alarm, fault indicators ﬂashes

4 me aer the formang is completed.

Operation

All Partition

1 Enter the user password.

2. Tab the stay/away/disarm key.

Specified

Partition

1. Tab the user password.

2. Tab the √ key.

Enter the partition No.(1/2/3/4).

4. Tab the stay/away/disarm key.

Partition

Keypad

Fire Alarm

Panic Alarm

Confirm

Tasks

1.Enter the user password.

2.Tab the stay/away/disarm key.

Stay/Away Arming

Disarming

Global Keypad

Hold the fire alarm key for 3 s.

Hold the disarming key for 3 s.

Tab the √ key.

R ee 10.0 4.8F sp d kbps/ bps

R re uenc 433 H 8 8 HF f q y M z/ 6 M z

R metho 2G SF d F K

Tr n m on t nce 800m o en rea s issi dis a ( p a a)

Po er 10 mw dB

T m er roo 1 t m er tch, ront n re r ta p -p f a p sw f a d a am erp -p froo

Wi l ss M d l i a s wi l pa lre e o u e Commun c te th contro ne

Tag ad pp s s a da d re er Su ort t n r IC c ra d

B zzu er 1

Ser ort 1, re er eial p s v d

In c tordi a

t tu n c tor o er s a s i di a s: p w (g )reen , u t , n rm refa l ( )orange a d ala ( d)

4 r on n c tor rme rme uepa  i di a s: a d/disa d (bl )

Ba klig g pc ht 1 rou

N i k yumer c e 10, 0 to 9

F  k y 6 ﬁ away a i g s ay a i g dia i g d l  gunc on e , re, rm n , t rm n , rm n , e e n , n Oa d K

E ectr c & erl i al Ba y w Ba i s D y a s s a dbyPo er 4 AA er e ，3V C 3 ，≥ e r t n

O er on hum t 10 to 90p a idi y ％％

O er on tem er ture 10 to +55p a p a ﹣ ℃ ℃

Co or h te cl W i /Bla k

In t on moun n th cres alla Wall  g wi s ws

Wi l ss K ypadre e e

Interface n Com onenta d p

Others

Do not mix baeries of

diﬀerent brands.

Do not mix old and new

baeries.

EN50131-1:2006+A2:2017

EN50131-3:2009E

N50131-5-3:2017

Security Grade 2

Environmental Class II

1. Log in to the Search for APP Store.

“Hik-Connect” .Download and install the

client to your phone. Run the client.

2. Power on the security control panel.

3. Log in the client and tap the icon “+”

to add the ontrol panel. Scan the QR

code or input the device serial No. to

add the device( in the registraon

mode).

4. Tap the “+” icon on the device page

to add the peripherals. .

Local Enrollment APP Enrollment

Present

Beep

Tag Sensed

Present Remove

Beep

Tag Sensed

Hold 3s,

remove aer a beep

Present

Beep

Tag Sensed

3System

Armed

Remove

Operang illegal tag

(unregistered tag)

more than 3 mes,

the device will be

locked for 90s.

Refer to the Components

and Indicaon

secon for indicator and

buzzer descripon.

1Away Arming

Other

Operaon

Tag Operaon 2Stay Arming 3Disarming

Delete Delete the latest key operation

Product specificaties

Merk:	Hikvision
Categorie:	Toegangscontrolesysteem
Model:	DS-PKA-WLM-433

Heb je hulp nodig?

Als je hulp nodig hebt met Hikvision DS-PKA-WLM-433 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Toegangscontrolesysteem Hikvision

Hikvision DS-TMG035 Handleiding

4 Mei 2024

Hikvision DS-TMT202-D Handleiding

3 Mei 2024

Hikvision DS-TMT201-D Handleiding

3 Mei 2024

Hikvision DS-K7M-AW50 Handleiding

13 Maart 2024

Hikvision DS-K1T804BF Handleiding

27 Februari 2024

Hikvision DS-K1802M Handleiding

4 Augustus 2023

Hikvision DS-K1107AEK Handleiding

4 Augustus 2023

Hikvision DS-K1102AEMK Handleiding

4 Augustus 2023

Hikvision DS-K1108E Handleiding

4 Augustus 2023

Hikvision DS-K1102AEM Handleiding

4 Augustus 2023

Handleiding Toegangscontrolesysteem

Nieuwste handleidingen voor Toegangscontrolesysteem

EQ-3 HM-LC-BL1-SM Handleiding

16 November 2024

Acti LACS3000 Handleiding

14 November 2024

Abus BRIDGE One Handleiding

2 November 2024

Panduit ACF05 Handleiding

2 Oktober 2024

Viking K-1200 Handleiding

30 September 2024

Viking K-1270-IP-EWP Handleiding

30 September 2024

Viking K-1275-IP-EWP Handleiding

30 September 2024

Viking K-1770-IP Handleiding

30 September 2024

Viking K-1270-EWP Handleiding

30 September 2024

Viking K-1770-3-EWP Handleiding

30 September 2024