Hikvision DS-2FM2466 Handleiding

Hikvision Detector DS-2FM2466

Lees hieronder de 📖 handleiding in het Nederlandse voor Hikvision DS-2FM2466 (28 pagina's) in de categorie Detector. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

DS-2FM2466 Data Acquisition Module

Operation Manual

DS-2FM2466 Data Acquisition Module Operation Manual •

Operaon Manual

Any and all informaon, including, among others, wordings, pictures, graphs are the properes of

Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinaer referred to be

“Hikvision”). This user manual (hereinaer referred to be “the Manual”) cannot be reproduced,

changed, translated, or distributed, parally or wholly, by any means, without the prior wrien

permission of Hikvision. Unless otherwise spulated, Hikvision does not make any warranes,

guarantees or representaons, express or implied, regarding to the Manual.

About this Manual

This Manual is applicable to -2FM2466 data acquision module. DS

The Manual includes instrucons for using and managing the product. Pictures, charts, images and

all other informaon hereinaer are for descripon and explanaon only. The informaon

contained in the Manual is subject to change, without noce, due to rmware updates or other

reasons. Please nd the latest version in the company website

( hp://overseas.hikvision.com/en/).

Please use this user manual under the guidance of professionals.

Trademarks Acknowledgement

and other Hikvision’s trademarks and logos are the properes of Hikvision in various

jurisdicons. Other trademarks and logos menoned below are the properes of their respecve

owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS

HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,

AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,

MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-

INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,

EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,

BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE

OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY

AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL

OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER

ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL

PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR

JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS

THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED

WITH ILLEGITIMATE PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER

PREVAILS.

DS-2FM2466 Data Acquisition Module Operation Manual •

Applicable Models

This manual is applicable to -2FM2466 data acquision module.DS

Symbol Conventions

The symbols that may be found in this document are dened as follows.

Safety Instructions

 Proper conguraon of all passwords and other security sengs is the responsibility of the

installer and/or end-user.

 In the use of the product, you must be in strict compliance with the electrical safety

regulaons of the naon and region. Please refer to technical specicaons for detailed

informaon.

 Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power

Source with 100 to 240 VAC or 12 VDC according to the IEC60950- standard. Please refer to 1

technical specicaons for detailed informaon.

 Do not connect several devices to one power adapter as adapter overload may cause over-

heang or a re hazard.

 Please make sure that the plug is rmly connected to the power socket.

 If smoke, odor or noise rise from the device, turn o the power at once and unplug the power

cable, and then please contact the service center.

Symbol

Description

Provides addional informaon to emphasize or supplement

important points of the main text.

Indicates a potenally hazardous situaon, which if not avoided,

could result in equipment damage, data loss, performance

degradaon, or unexpected results.

Indicates a hazard with a high level of risk, which if not avoided, will

result in death or serious injury.

Product specificaties

Merk:	Hikvision
Categorie:	Detector
Model:	DS-2FM2466
Kleur van het product:	Wit
Vermogen:	2.5 W
Aantal per verpakking:	1 stuk(s)
Ingangsspanning:	10 - 30 V
Merkcompatibiliteit:	Hikvision Digital Technology
Aantal kanalen:	1 kanalen