Hikvision DS-2CE16C2T-IT1 Handleiding

Hikvision Bewakingscamera DS-2CE16C2T-IT1

Lees hieronder de 📖 handleiding in het Nederlandse voor Hikvision DS-2CE16C2T-IT1 (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
TVI Bullet &Turret Camera
User Manual
Thank you for purchasing our product. If there
are any questions, or requests, please do not
hesitate to contact the dealer.
This manual may contain several technical
incorrect places or printing errors, and the content
is subject to change without notice. The updates
will be added to the new version of this manual.
We will readily improve or update the products or
procedures described in the manual.
Regulatory Information
FCC Information
FCC compliance: This equipment has been
tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
0100001050912
FCC Conditions
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
EU Conformity Statement
upon the purchase of equivalent new equipment,
or dispose of it at designated collection points.
For more information see: www.recyclethis.info.
2006/66/E C (battery directive):
This product contains a battery that
cannot be disposed of as unsorted
municipal waste in the European
Union.
See the product documentation for specific
battery information. The battery is marked with
this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your
supplier or to a designated collection point. For
more information see: www.recyclethis.info.
This series of camera adopts new generation
sensor with high sensitivity and advanced circuit
design technology It features high resolution,.
low image distortion and low noise, etc , which.
makes it suitable for surveillance system and
image processing system.
l
High performance CM OS sensor and high
resolution bring high-quality image;
l
Low illumination;
l
Support auto white balance, auto gain control,
electronic shutter control;
l
Unit transmission control;
l
Advanced 3-axis design meets different
installation requirements;
l
Adopt EXIR LED.
1 Introduction
1.1 Product Features
1.2 Overview
UD.6L0201D2097A01
2012/19/E U (W EEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
Please refer to the product specification for
camera parameters and functions.
This product and - if applicable - the
supplied accessories too are marked
with "CE" and comply therefore with
the applicable harmonized European
standards listed under the Low Voltage Directive
2006/95/E C, the EM C Directive 2004/108/EC ,
the RoH S Directive 2011/65/E U.
1.2.1 Overview of Type I Camera
TURBO HD
Type
Type I
Model
DS-2CE16C XT-IT
1.2.2 Overview of Type II Camera
Type II DS-2CE16C XT-ITX
DS-2CE56C XT-ITX
Privacy Notice
Surveillance laws vary by jurisdiction. Check all
relevant laws in your jurisdiction before using this
product for surveillance purposes to ensure that
your use of this product conforms.
1.2.3 Overview of Type III Camera
Type II I
2 Installation
Before you start:
l Please make sure that the device in the package
is in good condition and all the assembly parts
are included.
l Make sure that all the related equipment is
power-off during the installation.
l Check the specification of the products for the
installation environment.
l Check whether the power supply is matched
with your power output to avoid damage.
l Please make sure the wall is strong enough to
withstand three times the weight of the camera
and the mounting.
l If the wall is the cement wall, you need to insert
expansion screws before you install the camera.
If the wall is the wooden wall, you can use
self-tapping screw to secure the camera.
l If the product does not function properly,
please contact your dealer or the nearest
service center. Do not disassemble the camera
for repair or maintenance by yourself.
Industry Canada ICES-003 Compliance
This device meets the CAN I CE S-3 (A)/NMB-3(A)
standards requirements.
TVI Cable
Power Cable
Camera Bracket
IR LED
Lens
Camera
Figure -1 Overview of Type1 I Camera
Camera
Enclosure
Mounting Base
TVI Cable
Power Cable
Figure 1-3 Overview of Type III Camera
Figure 1-2 Overview of Type II Camera
This manual is applicable to the models below (X
indicates certain character(s), e.g.: DS-2CE16C XT-
ITX can b DS-2C E16C0T-IT DS-2C E16C0T-IT
e P/ M M)
3.Connect the corresponding power cable and
video cable.
4.Fix the camera to the ceiling with the supplied
fixing screws.
Figure 2-2 Fix the Camera to the Ceiling
Figure 2-1 The Drill Template
Steps:
1.Drill the screw holes in the ceiling according
to the supplied drill template, as shown in
Figure 2-1.
2.Hammer the supplied expansion screws into the
screw holes.
2.1 Installation of Type I & Type II
Camera
l The installation of Type I and Type I I cameras are
the same, here we take the installation of Type I
.camera as an example
l Type I and Type II cameras support wall-mounting,
ceiling-mounting, and gang box installation
methods.
2.1.1 Ceiling Mounting
Cable Hole
Template
Screw Hole
3-F 4(0.157")
Screw Hole
Screw Hole
5. Adjust the surveillance angle by loosening the 3
adjusting screws.
6. Tighten the fixing screws and the fixing ring to
fix the camera.
2.1.2 Wall Mounting
Steps:
1.Drill the screw holes in the wall according to the
supplied drill template, as shown in Figure 2-1.
2.Hammer the supplied expansion screws into the
screw holes.
3.Connect the corresponding power cable and
video cable.
4.Fix the camera to the wall with the supplied screws.
Figure 2-3 Fix the Camera to the Wall
5. Adjust the surveillance angle by loosening the 3
adjusting screws.
6. Tighten the fixing screws and the fixing ring to
fix the camera.
2.1.3 Installation with Gang Box
Steps:
1.Attach the supplied drill template to the ceiling/
wall according , as shown in Figure 2-4.
Figure 2-4 Drill Template with Gang Box
2.Take apart the gang box and fix the camera to the
cover of the gang box with the supplied 3 PM4
screws.
Figure 2-5 Fix the Camera with Gang Box Cover
Figure 2-6 Fix the Gang Box to the Wall/Ceiling
3.Drill the screw holes in the ceiling/wall according
to the supplied drill template.
4.Hammer the supplied 3 expansion screws into the
screw holes.
Figure 2-7 Fix the Camera to Gang Box
5.Connect the corresponding power cable and
video cable.
6.Fix the camera to the ceiling with the supplied
fixing screws.
Figure 2-8 Adjust the Surveillance Angle
7.Loosen the screws and trim ring to adjust the
surveillance angle.
8. Fix the camera by tightening the screws and trim
ring.
2.2 Installation of Type III Camera
Screw Hole
1.Drill the screw holes in the ceiling according to the
supplied drill template, as shown in Figure 2-9.
2.Hammer the supplied expansion screws into the
screw holes.
Steps:
Figure 2-9 The Drill Template
3.Fix the mounting base to the ceiling with 2 PA4
screws, as shown in Figure 2-10.
Figure 2-10 Fix the Mounting Base to the Ceiling
4.Connect the corresponding power cable and
video cable.
5.Secure the camera to the mounting base.
6.Adjust the camera according to the figure below
to get an optimum angle.
360°
360°
0-75°
Figure 2-11 3-axis Adjustment
2.2.2 Wall Mounting
2.2.1 Ceiling Mounting
Bracket Plate
1. Install the wall mounting bracket onto the wall,
as shown in Figure 2-12.
2.Fix the bracket plate onto the bracket with the
supplied screws, as shown in Figure 2-12.
Steps:
Figure 2-12 Install the Bracket and Mounting Base
3. Install the mounting base onto the bracket plate
with 2 M4 screws, as shown in Figure 2-13.
Figure 2-10 Fix the Camera with the Bracket
M4 Screw
Mounting Base
Bracket Plate
Figure 2-13 Install Mounting Base
4.Connect the corresponding power cable and
video cable.
5.Secure the camera to the mounting base.
6.Adjust the camera according to Figure 2-11 to
get an optimum angle.

Product specificaties

Merk: Hikvision
Categorie: Bewakingscamera
Model: DS-2CE16C2T-IT1

Heb je hulp nodig?

Als je hulp nodig hebt met Hikvision DS-2CE16C2T-IT1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Bewakingscamera Hikvision

Hikvision

Hikvision DS-2CE12KF3T-LS Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE78D0T-LXTS/A Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE76U0T-LPF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE78U0T-LF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE16U0T-LPF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE72KF3T-LSYE Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE17U0T-LF Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE72KF3T-LS Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE12KF3T-LSYE Handleiding

18 December 2024
Hikvision

Hikvision DS-2CE76U0T-LMF Handleiding

18 December 2024

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera

Xiaomi

Xiaomi Smart Camera C400 Handleiding

30 December 2025
Axis

Axis F4105-SLRE Handleiding

27 December 2024
DIO

DIO CAM-RE02-4G Handleiding

27 December 2024
Axis

Axis Q1800-LE-3 Handleiding

23 December 2024
Honeywell

Honeywell HC35WE5R3 Handleiding

20 December 2024
Honeywell

Honeywell Performance H4W8PER2V Handleiding

20 December 2024
TP Link

TP Link VIGI C450 Handleiding

18 December 2024
Bolin Technology

Bolin Technology B6-420 Handleiding

18 December 2024
Bolin Technology

Bolin Technology VCC-M2H10BI-4FN1 Handleiding

16 December 2024
Bolin Technology

Bolin Technology Blue Line B2-220 Handleiding

16 December 2024