Hifonics Elite HEW8D4S Handleiding

Hifonics Subwoofer Elite HEW8D4S

Lees hieronder de đź“– handleiding in het Nederlandse voor Hifonics Elite HEW8D4S (3 pagina's) in de categorie Subwoofer. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Sealed enclosures offer a range of performance
proîšżles depending on the internal air volume.
Larger enclosures will have a smoother more
extended response while a small enclosure
will have increased output in a more focused
frequency range. Sealed enclosures are the
simplest to construct but do require that the box
be completely air tight.
• Use 3/4” MDF
• Make sure the woofer mounting panel is
full width and height
• Glue all mating surfaces
• Use wood screws
• Use silicone caulk on all internal joints
The internal volume of the
enclosure must be determined
to insure proper performance.
Simply measure height, width and
depth of enclosure you intend
to build. Subtract the material
thickness. Multiply these numbers
and divide by 1728 to get the
volume in cubic feet.
For enclosures with an angled
panel, measure the larger and
smaller depths, add these
together and divide by two. Use
this averaged depth.
Enclosure
Volume
D
H x W x D
1728
D1 + D2
2
Sealed
Vented
Enclosure types
Volume calculation
Subwoofer dimensions
CAUTION
Always consider consulting a professional audio installer
before installing new subwoofers. High power audio
systems have the ability create sound levels above 130dB.
Extended exposure to high sound pressure levels can
cause hearing damage.
Always run any new wiring through safe areas that wont
interfere with the normal operation of the vehicle.
Congratulations on your choice of a HIFONICS subwoofer.
This “Quick Start Installation” guide is meant to help you
“hook up” and play music. For more detailed information
on system setting, speaker and subwoofer conîšżguration,
and full speciîšżcations by model, visit the website at
HIFONICS.com
It’s a good idea to conrm that you have purchased the
correct size subwoofers to îšżt your vehicle. If you have any
reservations about being able to complete the installation
yourself, we recommend contacting a professional. Be careful
as you go. Always disconnect the negative battery terminal
before starting any electrical work on the vehicle.
HEW8D4S HEW10D4S HEW12D4S
Height 12.5” 13” 14.5”
Width 12.5” 13” 14.5”
Depth 9.0” 10” 10.25”
Vb 0.5 ft
30.65 ft30.75 ft3
F3 56 HZ 54 Hz 56 Hz
Qtc 2.08 1.46 1.93
HEW8D4S HEW10D4S HEW12D4S
Height 12.5” 13.5” 14.5”
Width 17.5” 18.5” 19.5”
Depth 1 5.5” 6.0” 6.0”
Depth 2 7.5” 8.0” 8.0”
Vb 0.5 ft30.65 ft30.75 ft3
F3 56 HZ 54 Hz 56 Hz
Qtc 2.08 1.46 1.93
Before you start
Rectangular
Angled
Recommended enclosures
Enclosure construction
in(mm) A B C D
HEW8D4S 8.34" (212) 2.63" (67) 7.24" (184) 0.66" (16.9)
HEW10D4S 10.2" (260) 2.99" (76) 9.09" (231) 0.68" (17.3)
HEW12D4S 12.2" (310) 3.17" (80.5) 10.7" (271.9) 0.72" (18.3)
A
B
D
C
Vented designs are NOT recommended. This
subwoofer is designed to perform in small
sealed enclosures.
Quick Start
Installation Guide
A Low pass îšżlter will allow only
the bass frequencies to reach the
woofer making for a more natural
transition to the higher frequency
drivers. Check your amplier’s
manual for details.
We recommend using an
electronic subsonic îšżlter. This will
help to protect the woofer from
extreme low frequency distortion.
Many ampliîšżers are equipped
with this type îšżlter. Check your
amplier’s manual for details.
This subwoofer is equipped with
quick disconnect type terminals.
Use crimp type terminals or solder
the wire directly to the terminals.
Depending on the number of woofers you intend to use,
you can conîšżgure the wiring to provide the best impedance
load for your system. Below are some examples. Consult
your amplier’s manual for recommendations.
Low Pass (LPF)
Subsonic
Conîšżgurations
Connections
Subwoofer specicationsCrossovers
Wiring
4 4
82.7
4 4
4 4
4 4
4 4
4 4
4 4
4 4
2
4 4
2
Hifonics products are designed and engineered in the USA by
847-540-7700
www.maxxsonics.com
10Hz 100Hz 1000Hz
10Hz 100Hz 1000Hz
HEW8D4S HEW10D4S HEW12D4S
NomZ 2 x 4 2 x 4 2 x 4 Ohm
Sd 206.1 343.1 479.2 cm²
Revc 7.13 7.18 7.19 Ohm
BL 8.27 12.62 12.89 N/A
Vas 10.71 34.92 82.11 Liters
Cms 0.182 0.192 0.24 mm/N
Mms 56.52 87.3 111.96 Grams
Fs 50 39 31 Hz
Qms 8.141 7.20 7.32
Qes 1.93 1.00 1.02
Qts 1.56 0.88 0.89
no 0.07 0.18 0.22 %
SPL@1W 82 83 84 dB
Xmax 8.2 8.7 9.0 mm
RMS 250 300 300 Watts
Peak 500 600 600 Watts
HF ELITE Shallow wfr QSG 01 - rev1
WARRANTY
Maxxsonics USA, LLC. warrants this product, to the original consumer purchaser, to be free
from defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA, LLC. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
and use must be returned to the original authorized Maxxsonics USA, LLC. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA, LLC. This warranty is limited to defective parts and speciîšżcally excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
HE
HE
HE
HEW8D
W8D
W8D
W8D4
4
4
4S
S
S
SHEW8D4S
HE
HE
HE
HEW10D
W10D
W10D
W10D4S
4S
4S
4SHEW10D4S
HEW12D
HEW12D
HEW12D
HEW12D4
4
4
4S
S
S
SHEW12D4S
Visit Hifonics.com


Product specificaties

Merk: Hifonics
Categorie: Subwoofer
Model: Elite HEW8D4S

Heb je hulp nodig?

Als je hulp nodig hebt met Hifonics Elite HEW8D4S stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Subwoofer Hifonics

Handleiding Subwoofer

Nieuwste handleidingen voor Subwoofer