Heritage Audio MCM-8 II Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Heritage Audio MCM-8 II (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
© 2018 Heritage Audio S.L. is the solely owner of the copyright of all information and drawings contained
in this manual which are not to be copied or reproduced by any means or disclosed in part or whole to any third
party without written permission.
Heritage Audio reserves the right to alter specifications without notice. The information in this manual has
been carefully checked and is believed to be accurate at the time of publication. However, no responsibility is taken
by us for inaccuracies, errors or omissions nor any liability assumed for any loss or damage resulting either directly
or indirectly from use of the information contained within it.
MCM
MCM
MCM
MCMMCM-8
-8
-8
-8 -8
II
II
II
IIII
PRELIM
PRELIM
PRELIM
PRELIMPRELIMINARY US
INARY US
INARY US
INARY USINARY USER GUIDE
ER GUIDE
ER GUIDE
ER GUIDEER GUIDE
v1.0
v1.0
v1.0
v1.0v1.0
*Modu
*Modu
*Modu
*Modu*Modules
les
les
lesles 73
73
73
73 73 JR
JR
JR
JR JR II
II
II
II II not i
not i
not i
not inot inclu
nclu
nclu
ncluncluded
ded
ded
dedded
- 2 MCM 8 II Iss
Preliminary User Guide v2.0
2
MC
MC
MC
MCMCM8 I
M8 I
M8 I
M8 IM8 II V
I V
I V
I VI VS
S
S
S S MCM8
MCM8
MCM8
MCM8MCM8
In 2015, Heritage Audio set a new standard in 500 Series enclosures with the addition of the
OST technology. Further, we introduced the MCM8, a true transformer- based voltage
summing mixer for 500 Series modules.
Hundreds of units later, we have taken all our customer´s feedback and included it in the new
version, the MCM8 II.
The main differences in between this version and its predecessor are:
- Extra 500 series button per channel, allowing to bypass the 500 series module when
mixing if desired. It also allows for quick comparisons in between processed/
unprocessed signals. It also makes using the mixer with empty slots quite easier. Just
un pressing the 500 button allows for this type of operation.
- - Significant lower noise: A highly innovative, new quasi balanced voltage summing
topology sets the noise floor of the new MCM8 II touching the theoretical minimum.
No more hiss into your mixes!
INTR
INTR
INTR
INTRINTRODU
ODU
ODU
ODUODUCTION
CTION
CTION
CTIONCTION
The MCM-8 II is an OSTTM 8 channel 500 Series Enclosure WITH mixer functions.
OST is a Heritage Audio proprietary technology which eliminates module’s interaction through
the power supply feeding each slot with independent supply stages.
The a mixer follows passive voltage summing topology, having the gain loss restored by a
classic ´ 73 type class A output stage.
- 2 MCM 8 II Iss
Preliminary User Guide v2.0
3
FRONT
FRONT
FRONT
FRONTFRONT PANEL OV
PANEL OV
PANEL OV
PANEL OV PANEL OVERV
ERV
ERV
ERVERVIEW
IEW
IEW
IEWIEW
*Modu
*Modu
*Modu
*Modu*Modules
les
les
les les 73
73
73
7373 J
J
J
J JR II
R II
R II
R II R II not i
not i
not i
not inot inclu
nclu
nclu
ncluncluded
ded
ded
dedded
Upper row on the front panel is dedicated to the 8 mixer’s main inputs.
Controls per channel are as follows:
- ON: When pressed, the output of the slot is added to the mix bus. When depressed,
it’s muted.
- “500”: When pressed, the signal going to the mixer section is taken from the output of
the 500 series module, while when not pressed, it is taken from the input of the
enclosure. This allows bypassing the module when summing, or using the mixer with
an empty slot.
- FADER: Attenuates the signal sent to the mix bus from unity to minus infinity. Fader all
clockwise means unity gain, whilst 12 o’clock means an approximate 20 dB of
attenuation. (or - 20dB of gain).
- PAN: Places the signal within the stereo spectrum, left, center, right or any
intermediate setting. The panoramic law follows a standard in which if a 0dB signal is
hard panned, it is - 3dB when center panned.
Lower zone is dedicated to the 500 series modules. Any module following the API protocol
( both mechanically and electrically) will be compatible with the unit.
Right part of the unit is dedicated to the mixer’s center section, as follows:
- VU Meters: Measuring the average level at the master outputs.
- Master Fader: Attenuates the Mix’s output from unity to minus infinity. The control
has a stepped feel for easy recall of settings. Fader all clockwise means unity gain,
whilst 12 o’clock means an approximate 20dB of attenuation.
At the bottom right there are LEDs showing the correct status of the external power source.


Product specificaties

Merk: Heritage Audio
Categorie: Niet gecategoriseerd
Model: MCM-8 II

Heb je hulp nodig?

Als je hulp nodig hebt met Heritage Audio MCM-8 II stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Heritage Audio

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd