Havis SC-1000-CS Handleiding

Havis Niet gecategoriseerd SC-1000-CS

Lees hieronder de 📖 handleiding in het Nederlandse voor Havis SC-1000-CS (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

UNTHREAD SOCKET SCREW FROM UPPER

RIGHT (CLOCKWISE) LOCATION TO LOWER

LEFT LOCATION FOR COUNTER-CLOCKWISE ROTATION

COUNTER-CLOCKWISE

ROTATION SCREW LOCATION

BOTTOM OF SWIVEL BASE

CLOCKWISE ROTATION

SCREW LOCATION

PRESS LEVER TO ROTATE SWIVEL BASE

SWIVEL BASE IS ASSEMBLED WITH CLOCKWISE ROTATION FROM THE FACTORY.

TO CHANGE FROM CLOCKWISE TO COUNTER-CLOCKWISE, REMOVE ROTATE

STOP SCREW AND RE-INSTALL TO COUNTER-CLOCKWISE LOCATION ON

BOTTOM OF SWIVEL BASE.

CLOCKWISE ROTATION

COUNTER-CLOCKWISE

ROTATION

INSTALLATION INSTRUCTIONS

(SHEET 1)

TOOLS LIST:

1. 2MM HEX WRENCH OR BIT WITH DRIVER

2. 3MM HEX WRENCH OR BIT WITH DRIVER

3. #1PHILLIPS SCREW DRIVER

4. #2 PHILLIPS SCREW DRIVER

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAVIS, INC. AND REPRODUCTION IN PART OR IN WHOLE WITHOUT THE WRITTEN PERMISSION OF HAVIS, INC. IS PROHIBITED.

DRAWN

DATE

TITLE

DWG. NO.

REV.

SHEET 1 OF 3

CUSTOMER INSTRUCTIONS

3/27/2023

S. YANG

SC-1000-CS

SWIVEL BASE

COUNTER TOP,

SELF CHECK-OUT,

2X FLAT HEAD SCREWS

SC-1000 HEAD UNIT

SWIVEL BASE

USE 4X COUNTERSINK HOLES

TO ATTACH TO COUNTER

DETAIL A

DETAIL B

DETAIL C

2X FLAT HEAD SCREWS

ATTACH IN THESE LOCATIONS

REAR OF SC-1000 HEAD UNIT

SLIDES UNDER SWIVEL BASE TAB

ASSEMBLY STEPS:

1. ENSURE SWIVEL BASE ROTATES IN DESIRED DIRECTION. SEE SHEET 1.

2. ATTACH SWIVEL BASE TO COUNTER WITH 4X FLAT HEAD SCREWS

(CUSTOMER TO PROVIDE) USING HOLES SHOWN IN

DETAIL A

3. SLIDE SC-1000 HEAD UNIT ONTO SWIVEL BASE AND SECURE WITH

2X FLAT HEAD SCREWS. SEE

DETAIL B

AND

DETAIL C

VIEWS.

INSTALLATION INSTRUCTIONS

(SHEET 2)

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAVIS, INC. AND REPRODUCTION IN PART OR IN WHOLE WITHOUT THE WRITTEN PERMISSION OF HAVIS, INC. IS PROHIBITED.

DRAWN

DATE

TITLE

DWG. NO.

REV.

SHEET 2 OF 3

CUSTOMER INSTRUCTIONS

3/27/2023

S. YANG

SC-1000-CS

SWIVEL BASE

COUNTER TOP,

SELF CHECK-OUT,

2X SET SCREWS

DISPLAY BRACKET

4X M4 X 10MM

PHILLIPS SCREWS

INSTALLATION INSTRUCTIONS

(SHEET 3)

4X PRINTER BRACKET SCREWS

DETAIL A

ASSEMBLY STEPS:

4. LOOSEN 2X SET SCREWS.

5. HOLD DISPLAY ATTACHMENT BRACKET AT DESIRED HEIGHT.

6. TIGHTEN 2X SET SCREWS.

7. ATTACH DISPLAY WITH 4X M4 X 10MM LONG PHILLIPS SCREWS.

8. SLIDE PRINTER BRACKET TO DESIRED LOCATION.

9. PLACE PRINTER INTO SC-1000-CF UNIT. 4X SCREWS CAN BE

LOOSENED TO ADJUST PRINTER BRACKET (SEE DETAIL A).

(

OPTIONAL

) DUAL LOCK (2 STRIPS INCLUDED) CAN BE USED

UNDER THE PRINTER TO HOLD IT IN PLACE IF DESIRED.

THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF HAVIS, INC. AND REPRODUCTION IN PART OR IN WHOLE WITHOUT THE WRITTEN PERMISSION OF HAVIS, INC. IS PROHIBITED.

DRAWN

DATE

TITLE

DWG. NO.

REV.

SHEET 3 OF 3

CUSTOMER INSTRUCTIONS

3/27/2023

S. YANG

SC-1000-CS

SWIVEL BASE

COUNTER TOP,

SELF CHECK-OUT,

Product specificaties

Merk:	Havis
Categorie:	Niet gecategoriseerd
Model:	SC-1000-CS
Kleur van het product:	Zwart
Gewicht:	6400 g
Breedte:	260.3 mm
Diepte:	174.7 mm
Hoogte:	355.6 mm
Gewicht verpakking:	7300 g
Breedte verpakking:	304.8 mm
Diepte verpakking:	203.2 mm
Hoogte verpakking:	406.4 mm
Maximale gewichtscapaciteit:	6.8 kg
Montage interface compatibiliteit (min):	75 x 75 mm
Montage interface compatibiliteit (max):	100 x 100 mm
Verbeterd kabelbeheer:	Ja
Type product:	POS-bevestiging
Bereik kantelhoek:	0 - 90 °