Havis DS-PAN-903 Handleiding

Havis Niet gecategoriseerd DS-PAN-903

Lees hieronder de 📖 handleiding in het Nederlandse voor Havis DS-PAN-903 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Owner’s Manual

Havis Docking Station

For Panasonic Toughpads FZ-M1 & FZ-B2

DS-PAN-900-SERIES_OMN_7-15

www.havis.com

1-800-524-9900

DS-PAN-901

DS-PAN-901-2

DS-PAN-902

DS-PAN-902-2

DS-PAN-903

DS-PAN-905

DS-PAN-905-2

DS-PAN-906

DS-PAN-906-2

DS-PAN-900 Series

Havis, Inc.

75 Jacksonville Road

Warminster, PA 18974

www.havis.com 1-800-524-9900

www.havis.com • 1-800-524-9900

DS-PAN-901

DS-PAN-901-2

DS-PAN-902

DS-PAN-902-2

DS-PAN-903*

DS-PAN-905*

DS-PAN-905-2*

DS-PAN-906*

DS-PAN-906-2*

Before Beginning (Original Instructions)

2 11

Havis is pleased to provide this Owner’s Manual to aid in the proper

installation and use of the DS-PAN-900 Series Docking Station for

the Panasonic Toughpads FZ-M1 and FZ-B2.

For questions regarding the set-up of your DS-PAN-900 Series Docking Station,

please contact Havis at 1-800-524-9900 or visit www.havis.com for additional

product support and information.

This Owner’s Manual applies to the following Part Numbers:

* Toughpad FZ-B2 is only compatible with DS-PAN-903, DS-PAN-905, DS-PAN-905-2, DS-PAN-906,

& DS-PAN-906-2 Docking Stations

• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE

AIRBAG DEPLOYMENT ZONE.

• DO NOT USE COMPUTER WHILE DRIVING.

• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

• ONLY TABLETS WITH RF PASS-THRU WILL LATCH INTO DOCKING STATIONS

EQUIPPED WITH AN ANTENNA MODULE (DS-PAN-901-2, DS-PAN-902-2, DS-PAN-905-2,

and DS-PAN-906-2). ATTEMPTING TO LATCH A TABLET WITH NON-RF PASS-THRU

MAY RESULT IN DAMAGE TO THE TABLET AND/OR DOCKING STATION.

• FOR THE DS-PAN-901, DS-PAN-901-2, DS-PAN-902, DS-PAN-902-2, DS-PAN-905,

DS-PAN-905-2, DS-PAN-906 AND DS-PAN-906-2 DOCKING STATIONS:

DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product

requires a certied, automotive grade, Panasonic approved 24W power

source rated for a continuous, 12VDC output (Havis Part Number LPS-102

or equivalent). Failure to comply with this requirement will cause product

damage that is NOT repairable and is NOT covered under warranty.

• FOR THE DS-PAN-903 DOCKING STATION:

DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: The Panasonic

FZ-M1 & FZ-B2 tablets require a certied, Panasonic approved power source

rated for a continuous, regulated 16VDC output. Failure to comply with this

requirement will cause product damage that is NOT repairable and is NOT

covered under warranty.

• FOR DOCKING STATION MODELS EQUIPPED WITH A BUNDLED POWER SUPPLY

(DS-PAN-902, DS-PAN-902-2, DS-PAN-906, DS-PAN-906-2), REFER TO THE SUPPLIED LIND

POWER SUPPLY REFERENCE GUIDE.

• WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN

0°C to 50°C (32°F to 122°F).

PLEASE REFER TO PANASONIC TOUGHPAD FZ-M1 & FZ-B2 OWNER’S MANUAL FOR

MORE INFORMATION.

Related Products

Havis oﬀers a wide variety of accessory products specically for use

with the DS-PAN-900 Series Docking Station. For more information or

to order, please visit www.havis.com.

LPS-102

90W Power Supply

External in-vehicle power supply and cable for Panasonic

Toughpads FZ-M1 & FZ-B2 with cigarette lighter adaptor.

DS-DA-218

Desktop Stand for Tablet Docking Stations

Durable stand for mounting tablet Docking Stations

for use in the home or oﬃce.

DS-DA-501

Replacement Keys

Set of two (2) replacement keys for DS-PAN-900

Series Docking Stations.

DS-DA-602

Rugged Communications Hub

Rugged USB/Ethernet hub makes adding peripherals to

your mobile workspace easy and safe.

Table of Contents

10 3

Specications

Parts Included

Port Replication Capability

Antenna Identication

Installation

Cable Management

Operation - Docking

Operation - Undocking

• Do not place metal objects or containers of liquid on top of the Docking Station

• If a malfunction occurs, immediately unplug the Power Supply and remove the tablet

• Use only the specied Power Supply (Part # LPS-102) with this Docking Station

• Do not store the Docking Station where water, moisture, steam, dust, etc. are present

• Do not connect cables into ports other than what they are specied for

• Do not leave the Docking Station in a high temperature environment (greater than 60°C, 140°F)

for a long period of time

• Do not connect cables to the DC Power Port or Ethernet Port exceeding 3 meters in length.

Precautions

Operation - Docking (continued)

Operation - Undocking

1) If previously locked, unlock Docking Station using supplied key.

2) While holding tablet with one hand, lift the Latch Handle on the top

of Docking Station.

3) Once unlatched grab both sides of tablet, rock the top forward and carefully

lift out of Docking Station, top end rst.

4) For theft deterrence, secure tablet by locking Docking Station with

supplied key (Hardware Kit Item 2).

EC DECLARATION OF CONFORMITY in accordance with EN 45014

Manufacturers Name: Havis, Inc.

Manufacturers Address: 47801 Anchor Court, Plymouth Twp, MI 48170 USA

Declares under our sole responsibility that the product:

Product name: Havis Docking Station For Panasonic Toughpad FZ-M1 & FZ-B2

Model: DS-PAN-90X, where ‘X’ may be any alphanumeric character and which describes product options.

May be followed by any alphanumeric characters which describe product options.

Product Options: This declaration covers all options of the above product which bear the CE Marking.

Is in conformity with the following standards or other normative documents:

EMC Directive 2004/108/EC: EN 55022:2010, Class B, Information technology equipment -

Radio disturbance characteristics - Limits and methods of measurement

EN 55024:2010, Information technology equipment - Immunity characteristics -

Limits and methods of measurement

Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)

BS EN 50498:2010: Section 7, after market electronic equipment in vehicles.

Supplementary Information:

The product herewith complies with the requirements of the EMC Directive 2004/108/EC. This product requires the

use of the provided e-Marked automotive power supply when used within vehicles.

Plymouth twp, MI, USA February 23, 2015 Bruce Jonik, Director of Engineering , Havis, Inc.

FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modications

to the model DS-PAN-90X not expressly approved by Havis, Inc. could void

the user's authority to operate this equipment.

Specications

Power Supply Input 12.0 V DC-In

Dimensions 7.9” ( 20.1 cm) H x 8.6” ( 21.8 cm ) W x 3.0” ( 7.6 cm ) D

Weight 1.6 lbs ( 0.73 kg )

Operating Environment -10° C to 50° C ( 14° F to 122°F )

Storage Environment -40° C to 85° C ( -40° F to 185° F )

Product specificaties

Merk:	Havis
Categorie:	Niet gecategoriseerd
Model:	DS-PAN-903
Kleur van het product:	Grijs
Breedte:	218 mm
Diepte:	201 mm
Hoogte:	76 mm
Compatibiliteit:	Panasonic FZ-M1
Type mobiele apparatuur:	Tablet/UMPC