Havis C-DMM-123 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Havis C-DMM-123 (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
C-DMM-123_INST_7-12 rev 9- 13
INSTALLATION INSTRUCTIONS
C-DMM-123
2013-2017 FORD INTERCEPTOR UTILITY
SWING-OUT DASH MONITOR MOUNT
Always!
Read all instructions before installing any Havis, Inc. products.
Check for obstructions (Wires, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
The Dash Monitor Mount bracket system requires two or three main parts that are sold
separately. See web site Monitor Congurator for more detailed bracket informaon.
hp://www.havis.com/monitor_mounts.htm
1 123)- Vehicle Specic dash mount bracket. (C-DMM-
1 - Computer Specic Monitor adaptor bracket. (C- -200 series) MM
1 - Oset adaptor bracket. (C- -301) MM
The C- -301 oset adaptor goes between the C-DMM-123 and C- -2XX. MM MM
It may not be required in some applicaons.
Docking staons for tablet applicaons can be bolted directly to C-DMM without adaptor. Oset
adaptor C- -303 is available if addional posioning opons are desired for docking staon.MM
TOOLS REQUIRED:
• Ratchet Wrench Air Saw or Plasc cung tool
• Socket Set Dash panel removal tool
• Open End Wrench 7/16”- File
• Phillips Screwdriver
HARDWARE and PARTS:
QTY: DESCRIPTION: PART #:
1 Upper Support Bracket Driver Side CM004263
1 Upper Support Bracket Passenger Side CM004264
1 Lower Support Bracket Driver Side CM004265
1 Lower Support Bracket Passenger Side CM004266
4 1/4" Serrated Flange Hex Nut GSM30023
4 # 10 x 1/2" Phillips Pan head machine screw GSM33118
4 # 10 Star Washer GSM31034
Note: The swing door ulizes a gas spring to assist in opening the door and to eliminate the possibility of it
slamming shut. If addional damping is desired because of heavier equipment, an oponal stronger gas spring is
available under Part Number CM86662-30 (sold separately)
Installer must change out gas spring as needed
C-DMM-123_INST_7-12 rev 9- 13
Main Frame Assembly for Interceptor Utility
CM004263 Upper Support Bracket
Driver Side
CM004265 Lower Support
Bracket
C- -301 MM
Offset adaptor
C-DMM-123_INST_7-12 rev 9- 13
View of dash instrument panel.
Carefully remove (unsnap) passenger side
Dash trim bezel. Trim removal tool and 90°
picking tool recommended.
Unplug and remove center control panel
Attach driver and passenger side upper support bracket
with OEM display screws. Driver side shown.
Torque to 3 Nm (27 in-lbs)
Remove screws holding center control panel.
(7mm socket)
Carefully remove (unsnap) driver side
Dash trim bezel.


Product specificaties

Merk: Havis
Categorie: Niet gecategoriseerd
Model: C-DMM-123
Kleur van het product: Zwart
Gewicht verpakking: 3175 g
Correct gebruik: Auto
Draaibaar: Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Havis C-DMM-123 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Havis

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Smeg

Smeg GTA-6 Handleiding

21 November 2024
Smeg

Smeg KIT6CX Handleiding

21 November 2024
Senal

Senal SCS-98 Handleiding

21 November 2024
Senal

Senal ASM-6 Handleiding

21 November 2024
Senal

Senal ASM-MNTKIT Handleiding

21 November 2024
Senal

Senal SMS-45 Handleiding

21 November 2024
Smeg

Smeg KIT6PX Handleiding

21 November 2024
Senal

Senal SCI-3212MP Handleiding

21 November 2024
Senal

Senal OLM-2S-P Handleiding

21 November 2024