Hartke HyDrive 112b Handleiding

Hartke Niet gecategoriseerd HyDrive 112b

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Hartke HyDrive 112b (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
Owner's Manual
HyDrive 112b Cabinet
Congratulations on the purchase of your Hartke HyDrive 112b bass cabinet! We know
you donā€™t like reading owners manuals, but youā€™ve just purchased one of the ļ¬nest
bass speaker systems around, and we want to tell you about it. So, before you plug
in and start playing, weā€™d like to suggest you take just a few moments to scan these
pages.
The HyDrive 112b is a 300 watt, 4 ohm bass speaker cabinet featuring our patented
HyDrive hybrid cone bass transducers. HyDrive speakers are constructed using an
outside curved paper cone producing warm low frequencies and an inside anodized
aluminum cone that produces smooth mids and high-end extension. This radical
construction provides a clean sound with a big low end, allowing you to sculpt a wide
range of tones for any musical style.
With proper care and operation, your HyDrive cabinet will operate trouble free for
many years. We recommend you record your serial number in the space provided
below for future reference.
Serial number: ____________________________________________
Date of purchase: __________________________________________
NOTE: Should your Hartke Cabinet ever require servicing, a Return Authorization
(RA) number is necessary. Without this number, the unit will not be accepted.
If purchased in the United States, please call Hartke at 1-800-372-6766 for a
Return Authorization number prior to shipping. Please retain the original packing
materials and, if possible, return the unit in its original carton and packing materials.
If purchased outside the United States, please contact your local distributor for
warranty information.
Introduction
Power Handling 300W RMS
Cabinet Impedance 4Ī©
LF Speaker 12ā€ paper/aluminum driver
Frequency Response 70Hzā€“5kHz (-3dB)
-10dB LF Response 35Hz
Inputs 1/4ā€
Cabinet Type Ported
Cabinet Construction Plywood, extensive bracing, dado joinery
Grille Black perforated steel
Product Dimensions 17ā€ x 19.75ā€ x 15.25ā€
432mm x 248mm x 387mm
Product Weight 33lb
15kg
Speciļ¬cations
HyDrive 112b Bass Cabinet
When connecting the HyDrive 112b to an
ampliī˜Ÿer, only use unshielded speaker cables.
Connect your ampliī˜Ÿer output to the speaker
input on the HyDrive 112b jack plate.
IMPORTANT: Every amplifier has a minimum
safe operating impedance, so be sure to check
the manufacturerā€™s recommended impedance
for your amplifier to avoid any damage to your
amplifier or voiding your warranty.
The HyDrive 112b impedance is 4 Ohms. When
two cabinets are connected together in parallel,
the total impedance is 2 Ohms. The impedance
of your speaker has an effect on your amplifier.
In general, the lower the impedance, the more
power your amplifier will output.
Basically, impedance is the amount of current that will ļ¬‚ow through a speaker at
a certain voltage. It is measured in Ohms (Ī©). The actual impedance of a speaker is
not constant across all frequencies. So, for convenience we use the term ā€œnominal
impedanceā€, which refers to the impedance that a speaker presents to an ampliļ¬er at
a reference frequency.
A speaker typically has an impedance rating of 4Ī©, 8Ī©, or 16Ī©. Generally, the lower
the impedance of a speaker, the more power will be developed by the connected
ampliļ¬er. For example, a 4Ī© speaker will extract more power from your ampliļ¬er
than an 8Ī© speaker. If you connect a speaker with an impedance lower than the
ampliļ¬erā€™s output rating, the ampliļ¬er can overheat and damage the power output
section. It is important to learn how to connect multiple speaker cabinets safely
without damaging the speakers or the ampliļ¬er in this way.
Here is a simple rule of impedance: When two speakers with the same impedance are
wired in , the total system impedance is , and when two speakers parallel cut in half
with the same impedance are wired in , the total impedance is the series sum of the
speakers individual impedance.
Connecting the HyDrive 112b

Product specificaties

Merk: Hartke
Categorie: Niet gecategoriseerd
Model: HyDrive 112b

Heb je hulp nodig?

Als je hulp nodig hebt met Hartke HyDrive 112b stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Hartke

Hartke

Hartke Bass Attack Pedal Handleiding

6 November 2024
Hartke

Hartke Acoustic Attack Handleiding

6 November 2024
Hartke

Hartke Chorus HC33 Handleiding

7 Oktober 2024
Hartke

Hartke Fuzz HF44 Handleiding

7 Oktober 2024
Hartke

Hartke Loop HL77 Handleiding

7 Oktober 2024
Hartke

Hartke 210TP Handleiding

8 Juli 2024
Hartke

Hartke 410TP Handleiding

8 Juli 2024
Hartke

Hartke 115TP Handleiding

8 Juli 2024
Hartke

Hartke HyDrive HL112 Handleiding

27 Juni 2024
Hartke

Hartke 810XL Handleiding

27 Juni 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Panasonic

Panasonic NB-W250 Handleiding

25 November 2024
Alpine

Alpine CHM-S611 Handleiding

25 November 2024
AOpen

AOpen DE3650-C Handleiding

25 November 2024
Lazer

Lazer Urbanize MIPS Handleiding

25 November 2024
Symmons

Symmons Dia 353GB-24 Handleiding

25 November 2024
SoundTube

SoundTube IPD-RS62-EZ Handleiding

25 November 2024
Moen

Moen Camerist 4905 Handleiding

25 November 2024
Lazer

Lazer Cameleon DLX Handleiding

25 November 2024
DMT

DMT DLD-85 Handleiding

25 November 2024
AOpen

AOpen AM1120T Handleiding

25 November 2024