Hartke 4.5XL Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Hartke 4.5XL (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
4 x10″ Plus 5” Stackable
Aluminum Drive Bass Enclosure
Hartke
4.5XL Introduction and Features
Congratulations on purchasing the 4.5XL bass enclosure by Hartke! The XL
Series enclosures have been designed to provide excellent tone with a fast
attack, deep low-end and punchy output. The 4.5XL features four 10”, propri-
etary low frequency drivers with specially designed aluminum cones, large voice
coils on Kapton formers, impregnated fabric surrounds, and matched convex
dust covers all mounted in a heavy-duty steel frames. Rounding out the tone is
a proprietary 5” aluminum mid-range driver. Using heavy-duty plywood con-
struction, covered in rugged carpet with recessed jack plate and ergonomic
metal handles, the 4.5XL will provide reliable performance from gig to gig and
venue to venue.
In these pages, you’ll find a detailed description of the features of the 4.5XL , as
well as a description of its front and rear panels, step-by-step instructions for its
setup and use and full specifications. You’ll also find a warranty card enclosed—
please don’t forget to fill it out and mail it in so that you can receive online tech-
nical support and so we can send you updated information about these and
other Samson products in the future.
We recommend you record your serial number in the space provided below for
future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number, the
unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-
6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible, return the unit in the origi-
nal carton and packing materials.
4.5XLFeatures
• 4 x 10 Inch heavy-duty, Aluminum
Low Frequency drivers
• 3/4" Plywood construction
• Tuned Front Shelf Port
• Perforated metal speaker grill
• Recessed metal handles
• Stacking corners
• Dual, parallel wired 1/4" jacks
• Covered in durable carpet
About Impedance
Before you hook up your speaker cabinet, be sure that you understand a little about
impedance. Impedance is the electronic load that the speaker puts on the power amplifier
and is measured in Ohms.
Here is the tricky, yet simple rule of impedance: When two speakers, of equal impedance
are wired in "Parallel", the total imped-
ance is cut in half and when two speak-
ers are wired in “Series”, the total
impedance is the sum of the speakers
individual impedance.
The 4.5XL impedance is 8 Ohms. So,
when two 4.5XL’s are connected
together in parallel, the total impedance
is 4 Ohms. The impedance of your
speaker also has an effect on your
amplifier. In general, the lower the
impedance, the more power your ampli-
fier will put out.
IMPORTANT: There is a minimum safe
impedance so be sure to check the
manufacturer’s recommended imped-
ance for your amplifier to avoid any
damage to your amplifier or voiding
your warranty.
Connecting the 4.5XL to Your Amplifier
The 4.5XL connections are made via
1/4” phone jacks located on the rear
panel jack-plate. Be sure to make your
connection with un-shielded speaker
cable. Connect the Amplifier Output to
the speaker Input on the 4.5XL’s rear
jackplate.
Using the EXTENSION Output
The 4.5XL provides a convenient
Extension Output for connecting addi-
tional speaker cabinets in parallel. Be
sure to read the section above on
impedance to insure a proper hook up
with your amplifier. Follow the steps
below to connect two 4.5XL’s using the
Extension Output. Connect the
Amplifier Output to the Input of the first
4.5XL. Now, connect the Extension
Output to the Input of the second
4.5XL.
4.5XL BASS CAB INET
400 WAT S
Hartke
8 EXTENSION
INPUTS
MADE IN CHINA
SERIAL NUMBER
Hartke S ystems Distributed w wide by Samso n Technolo g ies
www.hartke.com
Ha rt ke Syste ms
Distributed Exclusively by
Samson Technologies Co rp.
Hicksville, New Yo rk 11 802
MODEL 2 000
200 WATT S
8
= 120 WATT S
4
= 200 WATT S
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO USER SERVICE-
ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K.
SERIAL NUMBER
115
~ AC INPUT
115V/230V 50/60Hz
FUSE
5A/250V, 180W (115V)
2.5A/250V, 450W (230V)
SPEAKER OUT PUTS
8
ON OFF
HPF
EFF EC T
SENDRETUIRN
8
Connecting the 4.5XL
4.5XL BASS CAB INET
400 WAT S
Hartke
8 EXT SION
INPUTS
ADE IN CHIN A
SERIAL NUMBER
Hartke S ystems Distributed w wide by Samson Technolog ies
www.hartke.com
4.5XL BASS CAB I E T
400 WAT T S
Hartke
8 EXTENSION
NPUTS
MADE IN CHINA
SERIAL NUMBER
Hartke S ystems Distributed worldwid y S amson Technolo g ies
www.hartke.com
Ha rt ke Syste ms
Distributed Exclusively by
Samson Technologies Co rp.
Hicksville, New Yo rk 11 802
MODEL 2 000
200 WATT S
8
= 120 WATT S
4
= 200 WATT S
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO USER SERVICE-
ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K. SERIAL NUMBER
115
~ AC INPUT
115V/230V 50/60Hz
FUSE
5A/250V, 180W (115V)
2.5A/250V, 450W (230V)
SPEAKER OUT PUTS
8
ON OFF
HPF
EFF EC T
SENDRETUIRN
8


Product specificaties

Merk: Hartke
Categorie: Niet gecategoriseerd
Model: 4.5XL

Heb je hulp nodig?

Als je hulp nodig hebt met Hartke 4.5XL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Hartke

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd