Hartke 215XL Handleiding

Hartke Niet gecategoriseerd 215XL

Lees hieronder de đź“– handleiding in het Nederlandse voor Hartke 215XL (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
2 x15″Stackable
Aluminum Drive Bass Enclosure
Hartke
215XL Introduction and Features
Congratulations on purchasing the 215XL bass enclosure by Hartke! The XL
Series enclosures have been designed to provide excellent tone with a warm
punchy output. The 215XL features dual 15-inch, proprietary low frequency driv-
er with an aluminum cone, impregnated fabric surround, and matched convex
dust cover all mounted in a heavy-duty steel frame. Using heavy-duty plywood
construction, covered in rugged carpet with recessed jack plate and ergonomic
handle, the 215XL will provide reliable performance from gig to gig and venue
to venue.
In these pages, you’ll find a detailed description of the features of the 215XL, as
well as a description of its front and rear panels, step-by-step instructions for its
setup and use and full specifications. You’ll also find a warranty card enclosed—
please don’t forget to fill it out and mail it in so that you can receive online tech-
nical support and so we can send you updated information about these and
other Samson products in the future.
We recommend you record your serial number in the space provided below for
future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number, the
unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-
6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible, return the unit in the origi-
nal carton and packing materials.
215XL Features
• 2 x 15 Inch heavy-duty, Aluminum
Low Frequency driver
• 3/4" Plywood construction
• Four Tuned Front Ports
• Perforated metal speaker grill
• Recessed metal handles
• Stacking corners
• 1/4-inch phone input jack
• Covered in durable carpet
Connecting the 215XL
About Impedance
Before you hook up your speaker cabinet, be sure that you understand a little about
impedance. Impedance is the electronic load that the speaker puts on the power amplifier
and is measured in Ohms.
Here is the tricky, yet simple rule of impedance: When two speakers are wired in "Parallel"
the total impedance is cut in half and
when two speakers are wire in “Series”
the total impedance is the sum of the
speakers individual impedance.
The 215XL impedance (many audio
guys used the made up word “ohmage”,
however the correct term is impedance)
is 4 Ohms. So, when two 215XL’s are
connected together in parallel, the total
impedance is 2 Ohms. The impedance
of your speaker also has an effect on
your amplifier. In general, the lower the
impedance, the more power your ampli-
fier will put out.
IMPORTANT: There is a minimum safe
impedance so be sure to check the
manufacturer’s recommended imped-
ance for your amplifier to avoid any
damage to your amplifier or voiding
your warranty.
Connecting the 215XL to Your Amplifier
The 215XL connections are made via
1/4” phone jacks located on the rear
panel jack-plate. Be sure to make your
connection with un-shielded speaker
cable. Connect the Amplifier Output to
the speaker Input on the 215XL’s rear
jackplate.
Using the EXTENSION Output
The 215XL provides a convenient
Extension Output for connecting addi-
tional speaker cabinets in parallel. Be
sure to read the section above on
impedance to insure a proper hook-up
with your amplifier.
Har t ke Sys t e ms
Distributed Exclusively by
Samso n Technolo gies Co rp.
Hicksv ille, New York 11802
MOD EL 2000
200 WATTS
8
= 120 WATTS
4
= 200 WATTS
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-
ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK
HAZ ARD, DO NOT EXPOS E TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K.
SERIAL NUMBER
115
~ AC INPUT
115 V/230V 5 0/60 Hz
FUSE
5A/2 50V, 180 W (115 V)
2.5A/2 50V, 450W (230V)
SP EAKER OUTPU TS
8
ON OFF
HPF
EFFE CT
SENDRETUIRN
4

Product specificaties

Merk: Hartke
Categorie: Niet gecategoriseerd
Model: 215XL

Heb je hulp nodig?

Als je hulp nodig hebt met Hartke 215XL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Hartke

Hartke

Hartke Bass Attack Pedal Handleiding

6 November 2024
Hartke

Hartke Acoustic Attack Handleiding

6 November 2024
Hartke

Hartke Chorus HC33 Handleiding

7 Oktober 2024
Hartke

Hartke Fuzz HF44 Handleiding

7 Oktober 2024
Hartke

Hartke Loop HL77 Handleiding

7 Oktober 2024
Hartke

Hartke 210TP Handleiding

8 Juli 2024
Hartke

Hartke 410TP Handleiding

8 Juli 2024
Hartke

Hartke 115TP Handleiding

8 Juli 2024
Hartke

Hartke HyDrive HL112 Handleiding

27 Juni 2024
Hartke

Hartke 810XL Handleiding

27 Juni 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Panasonic

Panasonic NB-W250 Handleiding

25 November 2024
Alpine

Alpine CHM-S611 Handleiding

25 November 2024
AOpen

AOpen DE3650-C Handleiding

25 November 2024
Lazer

Lazer Urbanize MIPS Handleiding

25 November 2024
Symmons

Symmons Dia 353GB-24 Handleiding

25 November 2024
SoundTube

SoundTube IPD-RS62-EZ Handleiding

25 November 2024
Moen

Moen Camerist 4905 Handleiding

25 November 2024
Lazer

Lazer Cameleon DLX Handleiding

25 November 2024
DMT

DMT DLD-85 Handleiding

25 November 2024
AOpen

AOpen AM1120T Handleiding

25 November 2024