Hager WGDCH4 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Hager WGDCH4 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
www.hager.com
Safety instructions
Electrical equipment must only be installed and assembled by a qualied
electrician in accordance with the relevant installation standards, regulations,
directives and safety and accident prevention directives of the country.
Failure to comply with these installation instructions may result in damage to
the device, re or other hazards.
Function
Multiple frames for 2gang to 5gang combinations of ush-mounted devices.
The frames are suitable for vertical as well as for horizontal installation.
Correct use
- For ush-mounted installation with standard connectable wall boxes.
- Only suitable for use in indoor areas with no drip and no spray water.
Technical data
For horizontal installation:
Dimensions (Width x Height)
- 2gang: 170.2 x 86 mm
- 3gang: 256.3 x 86 mm
- 4gang: 342.3 x 86 mm
- 5gang: 428.3 x 86 mm
For vertical installation:
Dimensions (Width x Height)
- 2gang: 86 x 170.2 mm
- 3gang: 86 x 256.3 mm
- 4gang: 86 x 342.3 mm
- 5gang: 86 x 428.3 mm
Multi-gang frames
2gang / 3gang / 4gang / 5gang
Hager Dream
Installation manual
2
Information for electricians
Installation and electrical connection
Preparing the devices for installation
Remove cover at every single device to be combined (see installation manual of the
respective device).
Connecting the devices for multiple combinations
(for example with "3gang frame (horizontal)")
For tting of the devices the multi-gang frame has two diagonally arranged snap mecha-
nisms (1). On the outside corners of the supporting plate the devices have corresponding
xing holes for snapping onto multi-gang frame.
1
Fixing holes
Snap
mechanisms
Click
Click
Click
Click
Click
Click
Depending on the application position the multi-gang frame horizontally or vertically.
Example here: horizontal (1).
Snap the devices one after the other in the desired order on the multi-gang frame (1).
3
Installing the device combination into the wall box
(for example with “3gang frame (horizontal)”)
DANGER!
Touching live parts can result in an electric shock.
An electric shock can lead to death.
Disconnect the connecting cables before working on the device and
cover all live parts in the area!
ç
Wire each device of the combination according to its wiring diagram (see installation
manual of the respective device).
2
Multigang frame
After wiring, x the device combination with the screws into the wall boxes ( ).2


Product specificaties

Merk: Hager
Categorie: Niet gecategoriseerd
Model: WGDCH4

Heb je hulp nodig?

Als je hulp nodig hebt met Hager WGDCH4 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Hager

Hager

Hager FN296E Handleiding

16 November 2024
Hager

Hager FN117E Handleiding

16 November 2024
Hager

Hager FN097E Handleiding

16 November 2024
Hager

Hager FN367E Handleiding

16 November 2024
Hager

Hager MZN131 Handleiding

16 November 2024
Hager

Hager EG203 Handleiding

16 November 2024
Hager

Hager GS11019016 Handleiding

16 November 2024
Hager

Hager JK132E Handleiding

5 Januari 2024
Hager

Hager JK101SE Handleiding

5 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd