Hager VM314AH Handleiding

Hager Niet gecategoriseerd VM314AH

Lees hieronder de 📖 handleiding in het Nederlandse voor Hager VM314AH (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Hager Ltd. Hortonwood 50, Hortonwood, Telford, TF1 7FT / 01952 675 675 1

Design 30

RCCB Incomer Consumer Unit

Consumer Unit

Design 30 RCCB Incomer

For the distribution of power in a residential

application, conforming to BS EN 61439-3

including Annex ZB (16kA rating).

Design 30 is the enhanced board for use in applications where the

consumer unit is located in a living area of the dwelling and allows

compliance with BS 7671:2018;

Regulation 421.1.201 within domestic (household) applications consumer

units and similar assemblies shall comply with BS EN 61439-3 and shall

have their enclosure manufactured from a non-combustible material.

Regulation 411.3.3 additional protection by means of a 30mA RCD

Regulation 522.6.202 protection of wiring concealed in walls or partitions

with RCD 30mA.

Regulation 531.3.3 Selection of appropriate RCD. Type A RCCBs can

detect and respond to both AC and pulsating DC components.

RCCB incomer boards are generally used as sub distribution boards in

residential applications where all outgoing circuits share the same 30mA

RCD protection.

Description Size Cat ref.

Cat ref.

with Knockouts

2 Way 40A 30mA Type A RCCB Incomer 2 VM402AH VM402AHK

Con.unit,D30,6w,63A,30mA Type A RCCB 3 VM406AH VM406AHK

Con.unit,D30,8w,63A,30mA, Type A RCCB 4 VM410AH VM410AHK

Con.unit,D30,6w,100A,30mA type A RCCB 3 VM306AH VM306AHK

10 Way 100A 30mA Type A RCCB Incomer 4 VM310AH VM310AHK

14 Way 100A 30mA Type A RCCB Incomer 5 VM314AH VM314AHK

VM306 HA

Features & Beneﬁts

- Type A RCCBs for general purpose circuits and circuits containing

equipment incorporating electronic components.

- Cable clamp – Secures supply cables on entry to main incoming

device preventing any movement being transmitted through metertails

to device.

- Square cable entry points top and bottom for use with cable trunking.

- Meter tail cable entry plate (VM04CE) provided

- Rear knockouts for ease of cable entry – Cable protector plate

(VM02CE) provided

- Rigid top wall – Enhances rigidity to prevent distortion when removing

knockouts.

- Front cover retained screws – Prevents loss during installation

- Locate and hold cover – allows use of both hands whilst tting cover.

- Full metal din rail – Secure and stable attachment of devices.

- Quick release clip on MCB/RCBO – Allows tting and removal of

device with busbar in place.

- Optimised cabling space – Din rail positioned to provide maximum

space at top of board.

- Top mounted terminal rail makes the wiring of the neutral and earth

connections neat and simple.

- Health and safety lock allows the door to be secured with circuits

isolated during construction (via accessory see overleaf)

- Torque settings displayed inside front cover – easily accessible to

electrician during installation and maintenance.

RCCB

Hager Ltd. Hortonwood 50, Hortonwood, Telford, TF1 7FT / 01952 675 675 2

Design 30

RCCB Incomer Consumer Unit

Technical Characteristics

Standards BS EN 61439-3

Classication Consumer Unit

Rated & Operational Voltage (Un/Ue) 230V a.c 50 Hz

Rated Insulation Voltage (Ui) 320V a.c. 50Hz

Rated Frequency (fn) 50 Hz

Rated impulse withstand voltage (Uimp) 4kV

Rated Current of the Assembly (Ina) 40A/63A/100A

Rated Current of an Outgoing Circuit I

nC MCB 6A-63A (Marked Rated Current on Device)

Rated Conditional Short Circuit of the Assembly (I

cc) Annex ZB: 16kA rms at 250V, power factor 0.6 with equipment and

arrangements specied in Hager's technical documentation/catalogue

Protection against electric shock Consumer Unit shall be installed in an electrical system conforming to IEC

60364 / BS 7671

Rated Diversity Factor (RDF) / Values of assumed loading 2 Way to 3 Way - 0.8, 4 Way to 5 Way - 0.7, 6 Way to 9 Way - 0.6, 10 Way and

above - 0.5

Note: RDF only applies to continuously and simultaneously loaded circuits.

In principle, this means adjacent circuit breakers having a load on time exceeding 30 minutes or where a load not exceeding 30 minutes has an 'off' time less than

the 'on' time will need to have the rated diversity factor applied as indicated.

Pollution Degree 2

Types of System Earthing for which the assembly is designed TNC-S and TN-S when installed in an electrical system conforming to BS 7671

Intended locations Indoor use only

Stationary assembly

Degree of protection IP2XC with door open / closed and full compliment of devices / blanks tted.

Note: Where cables are installed through the top wall of the enclosure, gaps of

IP4X to be maintained.

Intended use Intended for use in domestic (residential) or similar premises

Electromagnetic compatibility (EMC) classication EMC environment B

External design Wall mounted, surface type, enclosed assembly.

Mechanical impact protection IK05

Type of construction Fixed parts

Incoming Line/Neutral terminal (80 - 100A board) 50mm²

Incoming Line/Neutral terminal (63A board) 25mm²

Incoming Earth Terminal 16mm²

Warranty - Hager undertakes to replace or repair at its discretion products should they become inoperable within the time periods as stated. - 2 Years

Height

Width

Depth

Design 30 Dimensions (mm)

Enclosure Size

2 3 4 5

Height 240 240 240 240

Width 149 221 293 364

Depth 102.5 102.5 102.5 102.5

Number of Knockouts

*Top Face 30 x 25 (mm) 2 2 2 2

*Top Face 40 x 30 (mm) 0 2 4 4