Hager 85745131 Handleiding

Hager Niet gecategoriseerd 85745131

Lees hieronder de 📖 handleiding in het Nederlandse voor Hager 85745131 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

KNX Radio shutter timer quicklink

Safety instructions

Electrical equipment must only be installed

and assembled by a qualied electrician in ac-

cordance with the relevant installation stan-

dards, regulations, directives and safety and

accident prevention directives of the country.

Failure to comply with these installation in-

structions may result in damage to the device,

re or other hazards.

The radio transmission is not suitable for safe-

ty or alarm applications.

These instructions are an integral component

of the product, and must be retained by the

end user.

Design of the device

(3)

(5)

(6) (7)

(4)

(2)

(1)

Figure 1: Design of the device

(1) Insert (see „Accessories“, not in scope of

delivery)

(2) Frame (not in scope of delivery)

(3) Application module

(4) Display

(5) Design cover

(6) Screw for dismantling protection (not for

design lines R.1/R.3)

(7) Operation buttons

Function

This device is a product of the quicklink system, in

which installation devices communicate via radio

signals.

quicklink stands for a conguration mode in which

the function-related connection between trans-

mitters and receivers is set on the device through

push-buttons and displays without further tools.

All devices congurable by quicklink can be opera-

ted together in one system.

This device is compliant to the R&TTE-Directive

1999/5/EG. The Declaration of Conformity and

further system information can be found on our

homepage www.berker.de.

The device may be used in all EU and EFTA

countries.

Correct use

- Application module for shutter inserts or power

supply for radio application modules

- Manual, time-controlled and automatic operati-

on of blind/shutter motors connected to insert

- Transmission and reception of manual, time-

controlled and automatic operation commands

via quicklink

- Unsuitable for lighting control

- Only suitable for use in indoor areas, no drip or

spray water

The quicklink conguration of the devices must

only be carried out by qualied electricians.

Product characteristics

- quicklink functions for integration into the remo-

te and group control of blinds/shutters

- Integration into scenes

- Two preset standard time programmes, indivi-

dually adjustable

- Astro programme for automatic operation at

dawn/dusk

- Astro time shift to adjust the operation times

- Holiday programme for random operation times

in automatic mode

- Party programme to prevent unintentional ope-

ration of the shutters by automated operation

commands as well as radio/extension unit com-

mands

- Keylock

- Automatic switching to standard/daylight saving

time

- Brightness-dependent operation when using a

radio sun sensor

Performance after mains breakdown/return of

mains supply

- Mains breakdown:

Saving of the current conguration and pro-

gramming in the non-volatile memory. The de-

vice then switches to economy mode. Only the

internal clock continues to run to keep the time

up-to-date. The use of a bu󰀨er memory en-

sures that the time stays up-to-date for up to 24

hours.

- Return of mains supply:

The application module executes an initialisati-

on operation1), the basic display is restored.

The stored conguration and programming is

loaded from the memory. Any operations pen-

ding when the power supply broke down will

not be executed after return of mains supply.

1) If the bu󰀨er memory is full, date and time must be

entered again.

Operation

Operating concept and display elements

When controlling the shutter, the buttons (Fig. 2)

distinguish between a short press and a long press

of > 0.5 seconds on the button.

Pressing the button for > 2 seconds can trigger

various functions within the menu operation.

The current clock status is shown in the display.

Active functions are displayed by using symbols

(Table 1). Display illumination is activated for as

soon as a button is pressed.







07 3:0

Wednesday

12 4:1

21 2:0

(8) (9) (11)(10)

(12)

(13)

(14)

Figure 2: Display and operating elements

(8) UP button p

(9) Back button á

(10) OK button

(11) DOWN button q

(12) Display area for weekday and time

(13) Display area for active functions/programming

(14) Display area for the next operation times

Symbol Function

Keylock active

Manual operation,

no automatic operation times

Preset programme (week programP1 -

me) or (week/weekend program-P2

me) is active

Astro programme is active,

UP and DOWN operation times are

controlled depending on dawn/dusk

times

Party programme is active,

manual operation only. Programmes,

extension units and radio commands

are not executed

Normal radio operation is active,

radio commands for master or group

controls can be transmitted and re-

ceived

Standalone programme,

Device has temporarily been removed

from higher-level master controls, but

can still be active in a group control

Holiday programme,

Random variation of operation times,

only possible in combination with

, ,

Device is in radio conguration mode

Table 1: Symbols in the function/programme line

(13) of the display

Operate shutter - operation from the basic

display

Manual shutter operation is possible at any time

from the basic display, even if automatic pro-

grammes are active. Operation may however be

locked (see locking/unlocking operation).

Press the or button.p q

Short press on button: Adjustment of the slat

position.

Long press on button (> 0.5 s): Lock, shutter

moves to nal position.

The max. operation time upon a long press on

the button is 2 minutes.

Short press on or button during the shut-p q

ter movement.

The shutter stops at the position reached.



If a protection signal (wind, rain) is present, no

move commands are executed (see Setting

Operating Mode).

Locking/unlocking operation

The operation buttons of the shutter timer can be

locked, in order to prevent unintentional operation,

e.g. by children.

The shutter timer shows the basic display.

Press the button for more than 5 seconds.á

is shown in the display. The operation but-

tons are locked.

Press the button again for more than 5 á

seconds.

disappears in the display. The operation

buttons are enabled.

Opening the menu and navigating

The shutter timer is set and programmed via the

menu.

o p e r a ti n g

m o d e

h o l i d a y

mode

(17)

(15)

(16)

Fig. 3: Main menu

(15) Selected menu item

(16) Position display of the selected menu item in

the list of options

(17) Next option in the list

Short press on any button.

Operation is activated. The display is illuminated.

Press the button for more than 2 seconds.OK

The main menu is displayed. The rst menu

item (Fig. 3, 15) is highlighted operating mode

dark.

Press the or button to navigate through p q

the menu.

The selected menu item is highlighted dark.

Conrm the selected option by pressing OK.

The submenu opens.

Navigation through the menus can continue as

described above.

Press the button.á

The display switches to the previous contents.

To return to the basic display, press the á

button multiple times as necessary.

manual operation

P1: 7 - 21h

P2: 7 - 21h + 8 - 22h

(astro mode)

party mode

(activation)

(deactivation)

Deutsch

English

Francais

country-city selection

coordinates

>2 s

language

time settings

astro settings

factory settings

summer/winter time

operating

mode

holiday

mode

program

settings

time / date



modify

(restore defaults) 



advanced

settings



standalone

mode

(activation)

(deactivation) 

configuration

select quicklink

function

quicklink settings 

0 7 3: 0

Wednes d ay

1 2 4: 1

2 1 2: 0











































display settings

Displayed in

selected language

(e.g.: English)

(18) (19)

(20)

(21)

(22)

(23)

(26)

(27)

(25)

Figure 4: Menu overview

If no button is pressed for a period of two mi-

nutes, the display returns to the basic display.

Figure 4 shows an overview of the functions in the

menus/submenus: for the user and for the A.. E..

electrician refer to sections for additional informa-

tion Menu items in brackets are visible depending .

on the timer programming status.

Setting the values

Values, such as time or date, have to be set rst

for the programming of some functions.

The value to be set is selected and is highlighted

dark.

Press the or button.p q

Short press on button: Change the value by

one step.

Keep button pressed: Scroll through values.

Scrolling stops when the button is released.

M o n d a y - S u n d a y

0 6 : 00

(28)

If operation times are set, then a symbol (28)

shows whether it is an UP or DOWN operation

time.

Press the button.OK

The set value is applied.

Press the button.á

The display switches to the previous value. The

setting is not applied.

Submenu A1 - Select programme

One can choose between the following pro-

grammes:

- : manual operation

Operation takes place solely using the buttons

(see Operate shutter - operation from the basic

display).

- Time programmes and P1: 7 - 21 h P2: 7 - 21

h + 8 - 22 h :

These programmes are factory preset but can

be changed individually.

P1 is a week programme with identical operati-

on times for each day, is a week/weekend P2

programme with di󰀨erent operation times for

Mon. - Fri. and Sat. - Sun.

- astro mode:

Programme for dawn/dusk-dependent control

of the shutters (see submenu A7 - Setup Astro

programme).

The astro mode is only displayed if it has been

set up.

- : party mode

The Party programme prevents unintentional

operation of the controlled blinds/shutters by

programmed operation time or extension unit

operation, e.g. to prevent people from being

shut out by the shutter going down.

When the Party programme is active, a blind/

shutter can only be operated manually using

the buttons on the timer. Control of the shutter

via high-level control-sections and sensors as

well as by extension units, radio and forced

control commands is deactivated.ontrol of the

shutter by higher-level control-sections and

sensors as well as by extension units, radio

and forced control commands is deactivated.

If the blind/shutter was moved to a dened po-

sition in (see Table 4) and this forced mode

forced mode is active, then the Party pro-

gramme cannot be selected.

The shutter timer shows the Programme selection

submenu (Fig. 4, 19). The most recently selected

programme is highlighted dark.

ma n u a l o p e ra t i o n

P 1 : h 7 - 2 1

P 2 : h + h 7 - 2 1 8 - 2 2

Press the or button to select the desired p q

programme.

Press the button.OK

The screen switches to the basic display. The

selected programme is run, the corresponding

symbol (Table 1) is shown in the display (Fig.

2, 13).

Submenu A2 - Change, delete or add to

programmes

The options and (Figure modify restore defaults

4, 22) can be used for the preset factory pro-

grammes:

- to adapt, add to or delete operation modify

times. A maximum of 20 operation times per

day are possible.

- -restore defaults to reset a modied pro

gramme to the factory default programming.

Switching times can only be edited individually

under . It is not possible to edit pro-modify

gramme blocks (e.g. Mon. - Fri.).

Press the or button to select options or to p q

change the values.

Press the button.OK

Short press on button: Conrmation of the

current selection or the set value.

Long press on button (> 2 s) in programme edi-

ting: Adding an extra switching time or deletion

of an existing switching time.

a dd s t ep

de le te

Press the button.á

Short press on button: The display switches to

the last content.

Long press on button (> 2 s): Programming is

completed, the switching times are skipped.

Changes can be saved or rejected.

save

m o d i f i c a t i o n s ?

Y e s N o

Should no DOWN operation time follow an UP

operation time, or vice-versa, then the user is

informed on the display before saving, that

switching times are missing. Saving is never-

theless possible.

attention

i n co m p le t e s eq u e nc e

Submenu A3 - Activating/deactivating Holiday

programme

The Holiday programme is a simple form of the

presence simulation. The operation times of an

existing programme (P1, P2, Astro) are varied,

randomly, by ± 15 minutes. If operation times are

too close together (di󰀨erence < 15 minutes), then

they are not varied.

The shutter timer can be found in the submenu

holiday mode (Fig. 4, 20).

Conrm activation with .OK

The screen switches to the basic display and

the symbol for is displayed holiday mode

(Fig. 2, 13).

or:

Conrm deactivation with .OK

The screen switches to the basic display and

the symbol for is hidden in holiday mode

the display.

Submenu A4 - Activating/deactivating Stand-

alone programme

The Stand-alone programme can be used for

radio installations, in which the shutter timer was

assigned to a master shutter control as a subordi-

nate control. In Stand-alone operation the device

ignores the radio commands of higher-level master

controls and forced control commands, as well as

extension unit signals, i.e. operation commands

concerning the local blind/shutter are not execut-

ed.

If the blind/shutter was moved to a dened po-

sition in (see Table 4) and if this forced mode

forced mode is active, then the Stand-alone

programme cannot be selected.

The shutter timer can be found in the submenu

standalone mode (Fig. 4, 21).

Conrm activation OK with .

The screen switches to the basic display and

the symbol for is displa-standalone mode

yed (Fig. 2, 13).

or:

Conrm deactivation OK with .

The screen switches to the basic display and

the symbol for normal radio operation

is displayed (Fig. 2, 13).

Submenu A5 - Set time/date

In the main menu (Fig. 4, 18), is high-time/date

lighted dark.

Short press on button.OK

The hour display as an active element is high-

lighted dark.

Set the date and time (see Setting values).

When all the setting options have been run

through, the screen returns to the basic display.

Submenu A6 - Set time options

The automatic switching to standard/daylight

saving time can be activated or deactivated for the

shutter timer.

The submenu is displayed (Fig. 4, time settings

25).

Conrm the summer/winter time option by

pressing .OK

a u t o

m a n u a l

Press the buttons or to select the required p q

setting and conrm by pressing OK.

The device applies the setting and returns to

the submenu .time settings

Submenu A7 - Setup Astro programme

The Astro programme leads to a dusk/dawn depen-

dent control of shutters, meaning that automatic

operation time adjustment occurs according to the

season. As these operation times can be very early

or very late, the Astro programme o󰀨ers enhanced

options in order to adapt the operation time.

- Deviation from dawn time by ± 120 minutes

- Deviation from dusk time by ± 120 minutes

- Earliest UP operation time ( ) earliest up time

No operation times are executed before the

earliest UP time, as dened by dawn. The blind

moves UP at the time set here.

Astro operation times after the set time are

executed normally.

Example:

Set time

earliest up time

Sunrise Executed

operation time

06:15 07:32 07:32

05:23 06:15

- Latest DOWN operation time (latest down ti-

me)

No operation times are executed after the latest

DOWN operation time, as dened by dusk. The

shutter moves DOWN at the time set here.

Astro operation times before the set time are

executed normally.

Example:

Set time

latest down time

Sundown Executed

operation time

20:00 17:42 17:42

21:12 20:00

The installation location must be set to determine

the correct Astro operation times.

- Country/city selection:

Simple setting option by selecting a country

and a city near the location from a comprehen-

sive list of European cities.

- The setting is made by entering the geographic

co-ordinates and time zone of the location.

If the location is outside Europe or a high level

of accuracy is required for the Astro operation

times, then the setting should be made using

the co-ordinates.

The submenu is displayed astro settings

(Fig. 4, 26).

Press the buttons or to select the setting p q

type and conrm by pressing OK.

The country/city selection and the co-ordinate

settings are displayed.

Operation and

installation instructions

Berker GmbH & Co. KG

Zum Gunterstal

66440 Blieskastel/Germany

Tel.: + 49 6842 945 0

Fax: + 49 6842 945 4625

E-Mail: info@berker.de

www.berker.com

05/2022

6LE008041A

KNX radio shutter timer quicklink

Order-No. 8574 51 ..

Set the location and times (see Setting values).

Run through all the setting options.

Having con rmed the latest down time time, a

query is displayed.

co n f i g u r a t i o n

co m p l e t e d

Activate astro mode?

Yes N o

Press the buttons or to select the required p q

option and con rm by pressing OK.

Yes: The screen switches to the basic display.

The Astro programme is run and the symbol

is displayed (Figure 2, 13). The Astro settings

are saved and Astro is added to the programme

selection (Fig. 4, 18).

No: The screen switches to the basic display.

The Astro settings are saved and astro mode

is added to the programme selection (Fig. 4,

18) but is not run.

Submenu A8 - Set display contrast

In the submenu advanced settings (Fig. 4, 23),

display settings is highlighted dark.

Short press on button.OK

The current contrast value as an active element

is highlighted dark.

con tras t

5 1 %

Set the location and times (see Setting values).

Having made the setting, the display returns to

the Basic setting submenu.

Submenu A9 - Resetting the device to the

factory settings

In the factory setting, both the user‘s settings,

such as programmes or Astro settings, are re-

set and all the con gured radio logic functions

deleted.

In the submenu advanced settings (Fig. 4, 23),

factory settings is highlighted dark.

Press the button for more than 10 seconds.OK

During initialisation, the display shows and 

then switches to Start-up mode. Language,

time and date must be reset.

Information for electricians

Installation

Selecting installation location

A minimum distance between the transmitter and

corresponding receiver of about 1 m must be

maintained.

A minimum distance to electronic devices which

emit high frequency signals such as computers,

electronic transformers or microwave devices of

approx. 0.5 m must be maintained.

Mounting on or close to metal surfaces may cause

impairment of the radio transmission.

Take material penetration into account. The range

of the system can be optimised by selecting the

best possible mounting location:

Material Degree of materi-

al penetration

Wood, plaster, plasterboard,

uncoated glass

approx. 90 %

Brick, press boards approx. 70 %

Reinforced concrete, ﬂ oor

heating

approx. 30 %

Metal, metal grids, alumini-

um laminates, coated glass

approx. 10 %

Rain, snow approx. 1 ... 40 %

Table 2: Material penetration

Assembly of the device (Figure 1)

The insert is installed (see operating instructions

for the insert).

Attach the application module (3) together with

frame (2) to a suitable insert (1) so that the

contact pins are inserted into the available jack.

As soon as voltage is supplied to the applica-

tion module, the display indicates whether the

application module and the insert are compati-

ble with each other:

Display text Meaning

(Operating

mode indicator) Compatible

Invalid Power

Module Not compatible

Invalid or de-

fective Power

Module!

Incompatible or missing

supply voltage. Check the

insert and replace as ne-

cessary.

Changed

Power Module /

Reset to

factory?

Compatible, but not con gu-

red to each other.

Direct reset of the radio

con guration to the factory

setting possible by kee-

ping (10 s) the button OK

pressed.

User settings (e.g. times,

programmes) remain set.

Table 3: Insert/application module compatibility

If available,  x dismantling protection with

screw (4).

Click design cover (5 or 6) into place on appli-

cation module (3).

Start-up

First start-up

The device initialises itself when the mains voltage

is switched on for the  rst time. Insert detection

is carried out and, if an incompatible device is

found, a message is displayed (see Table 3). Then

an hourglass and the manufacturer‘s logo are

displayed.

Finish conﬁ guration: Short press on the cfg

button the transmitter.

Setting the shutter position for scenes

If the timer is assigned to a scene as a receiver,

then the shutter position can be set for this scene.

Move the shutter to the top  nal position and

wait for two minutes.

Move the shutter downwards to the desired

position.

Set the desired slat position by pressing the

button brieﬂ y several times (max. 30 UP steps).

Keep transmitter button belonging to the con -

gured scene command pressed for more than

5 seconds.

The shutter moves up for a second and then

down for a second. The scene position has

been saved.

Appendix

Technical data

Radio frequency 868 MHz

Radio protocol KNX radio

Connection Mounting on suitable inserts

(see Accessories)

Power supply via insert

quicklink logic functions max. 20 transmitters/

receivers

Receiver category 2

Transmitter duty cycle < 1 %

Power reserve via internal storage battery 8 h

Charging time of the internal storage battery 48 h

Programmable operation times max. 20 per

day/140 in total

Change-over time min. 600 ms

Shutter operating time 2 min

Slat angle adjustment time 250 ms

Relative humidity (no condensation) 0 ... 65 %

Ambient temperature -5 … +45 °C

Storage/transport temperature -20 … +60 °C

The Declaration of Conformity can be found on our

Internet site.

Accessories

Shutter insert comfort 8522 11 00

Power supply for KNX radio

application module 8502 01 00

KNX radio brightness sensor 8580 11 00

Web

Websites to determine the location‘s latitude/lon-

gitude:

- http://www.active-value.de/geocoder/

- http://itouchmap.com/latlong.html

Warranty

We reserve the right to make technical and formal

changes to the product in the interest of technical

progress.

Our products are under guarantee within the

scope of the statutory provisions.

If you have a warranty claim, please contact the

point of sale or ship the device postage free with a

description of the fault to the appropriate regional

representative.

The language selection is displayed, the  rst lan-

guage is highlighted dark.

Deutsch

Eng l his

Fra nçai s

Set language, time and date (see Setting

values).

The device switches to the basic display and is

ready for operation.

- --:- Wed nesd ay

12: 0 8

- --:-



While the basic display is displayed, the opera-

ting mode can be changed up to 30 s after de-

tecting the insert at the latest if necessary (see

Setting Operating Mode).

Setting Operating Mode

It is possible to change between two operating

modes during the  rst 30 s of the commissioning:

- Protection Mode (factory setting):

Mode for using sensors on the extension unit

inputs of the insert to protect against wind or

rain damage on outside blinds/awnings.

In protection mode no move commands are

executed while a signal (wind /rain sensor) is

present on the extension unit input.

- Manual Mode:

The last move command is executed regard-

less of whether or not it takes place locally or

via an extension unit.

The basic display is displayed.

Hold button and simultaneously for ap-p q

prox. 5 s until the display changes.

The operating mode is changed and displayed:

Priority extension line up enabled :display

The protection mode is set.

or:

Priority extension line up disabled :display

The manual mode is set.



In normal operation, the operating mode can no

longer be changed and displayed after 30 s

have expired.

Submenu E1 - Radio con guration

quicklink

The radio con guration sets the functional con-

nection between commanding (transmitters) and

function-executing (receivers) radio components.

Thus wireless e.g. central unit, group, extension

unit and time controls can be realised.

The following can be con gured:

- The local operation of the load connected to

the insert

- Radio commands to control other receivers

- Functions that are executed when radio com-

mands are received

For con guration by means of Hager connec-

tion device TX100 or ETS, additional functions

are available (see operating instructions for

TX100 or application description for ETS).

Con guring the radio shutter timer as a

receiver

Con guration to control the load connected to the

insert via reception of a radio command (Table 4).

As an example, the con guration of a wall-trans-

mitter and the radio shutter timer as receiver is

described down below (Table 5).

f the message is displayed Connection error

during con guration, this indicates an impossi-

ble combination or an error. Reset the message

by pressing .OK

l i n k e r r o r

Con guring the radio shutter timer as a

transmitter

The following radio command for activation of

receiver functions is supported:

UP/DOWN (switch)

The device is con gured for shutter opera-

tion of a compatible receiver. Both buttons

are assigned using a teach-in operation.

The device serves as a master. Active shut-

ter timer programmes are also run on the

receivers.

As an example, the con guration of the radio shut-

ter timer with a radio shutter push-button is shown

here (Table 6). Di󰀨 erent con guration displays,

such as for receivers with display, are to be taken

from the receiver operating instructions.

Deleting a con guration

To delete a con gured receiver or the local operati-

on, execute the con guration again.

Start conﬁ guration (see con guration of the

radio shutter timer as a receiver).

If necessary, Select transmitter button.

If the radio shutter push-button functions as a

transmitter, the step Select transmitter button

does not apply.

Select function on receiver.

Conﬁ rm the function on the receiver: press the

p q or button, select delete and con rm with

OK.

An hourglass displays the logic function

operation. The successful deletion of the logic

function is then displayed.



link deleting

successful

Con rm the message with OK.

The quicklink setting menu is displayed. The

logic function symbol is removed.

co n figu rati on

s e l ec t q u i c k l in k

fu n ctio n

Finish conﬁ guration: Short press on the cfg

button the transmitter.

Con guration of group functions

By means of a group function, one transmitter

controls several receivers. To do so, the same

functions must be con gured on all receivers.

Start conﬁ guration (see con guration of the

radio shutter timer as a receiver).

If necessary, Select transmitter button.

If the radio shutter push-button functions as a

transmitter, the step Select transmitter button

does not apply.

Select function on receiver: Select the identical

function on each receiver to be integrated and

conﬁ rm the function on the receiver.

Finish conﬁ guration: Short press on the cfg

button the transmitter.

Con guration of scenes

Individual settings for lighting and the position

of shutters can be combined into scenes. Two

di󰀨 erent scenes can be created via quicklink and

called up by pressing a button on the transmitter.

A scene is created by con guring a transmitter

button (radio command) in the corresponding

receivers with the scene function (Table 4).

Start conﬁ guration (see con guration of the

radio shutter timer as a receiver).

Select transmitter button: Select the button for

the scene command.

Select function on receiver: Select the Scene

function on each receiver to be integrated and

conﬁ rm the function on the receiver.

Con gurable

function

Display text Function resulting from transmitter operation,

notes

Move UP,

stop up

Long press on button: move the shutter to the top  nal posi-

tion.

Short press on button: slat adjustment of shutters

Short press on button during shutter operation: stop

Move DOWN,

stop down

Long press on button: move the shutter to the bottom  nal

position.

Short press on button: slat adjustment of shutters

Short press on button during shutter operation: stop

1Scene 1 scene 1 Receiver is allocated to a scene due to the con guration

of the function.eceivers are allocated to a scene due to the

con guration of the function.

Short press on button: loading the shutter position saved in

the scene.

Scene 2 scene 2

Shutter switch 1) up/down (switch) Device is assigned to a transmitter as a shutter switch. Up/

down function is con gured in one con guration operation.

UP forced

mode forced up Moves the shutter to the appropriate  nal position with high-

er-level priority. The execution of other commands .

DOWN forced

mode forced down

Delete delete Deletion of the con guration

Precon gured local function (see operation).

Table 4: Con gurable functions

Step Result

Start conﬁ guration

Short press on button on the wall cfg

transmitter.

If there is no further activation, the con guration

is automatically ended after 10 minutes.

The LED on the wall-transmitter blinks red. cfg

Cfg (Table 1) is shown in the display of the shutter

timer.

- - : - - Friday

12 3: 1

Cfg

- - : - -

All receivers within radio range also indicate the

con guration mode.

Select transmitter button

Short press on press-activation point on the

wall-transmitter which should activate the

function.

The LED on the wall transmitter blinks for 1 cfg

second.

Select function on receiver

Open the menu (see Opening quicklink setting

the menu and navigating).

d i s p l a y s e t t i n g s

a s r o s e t t i n g st

q i c k l i n k s e t t i n g s

c o n f i g u r a t i o n

s e l e c t q u i c k l i n k

f u n c t i o n

Press the buttons or p q to select the

quicklink function and con rm by pressing

OK.

c o n f i g u r a t i o n

s e l e c t q u i c k l i n k

f u n c t i o n

A list of possible functions is displayed.

do wn

s ce ne 1



If the transmitter button has already been

con gured with a function in a di󰀨 erent receiver

and/or the con gured function is part of a group

control, only this function can be con gured.

To change a function, the existing con guration

must be deleted and the new one needs to be

con gured.

Conﬁ rming function on receiver

Press the buttons or to select the required p q

function and con rm by pressing OK.

An hourglass displays the logic function operation.

The successful execution of the con guration is

then displayed.



link creation

successful

Con rm the message with OK.The menu is displayed. The quicklink setting

symbol indicates that a logic function was set up.

c o n f i g u r a t i o n

s e l e c t q u i c k l i n k

f u n c t i o n

Finish conﬁ guration

Short press on button on the wall transmitter cfg

again.

The LEDs on the radio wall-transmitter and all cfg

receivers within radio range go out. The dis-Cfg

play on the screen of the radio shutter timer goes

out. The function is con gured.

Table 5: Con guring the function for the radio shutter timer

Step Result

Start conﬁ guration

Open the menu (see quicklink settings

Opening the menu and navigating).

c o n f i g u r a t i o n

Con rm con guration with .OK The menu for activating the con guration is dis-

played. Con guration mode is inactive.

c f g O n

c f g O f f

Press the buttons or to select and p q cfg On

con rm by pressing OK.



If there is no further activation, the con guration

is automatically ended after 10 minutes.

Con guration mode is active. The cfg LED of the

shutter button light up in red colour.

c f g O n

c f g O f f

All receivers within radio range also indicate the

con guration mode.

If con gured already, the fct LED of the shutter

button indicates the con gured function.

Selezionare funzione

Select the DOWN/UP (switch) function on the

shutter using the button (see operating fct

instructions).

The LED blinks red and green. fct

Confermare la funzione

To save the allocation of command and function,

keep the button of the shutter button pressed fct

for more than 2 seconds.

> 2 s

The LED blinks. After successful saving, the cfg fct

LED blinks red and green.

Chiusura conﬁ gurazione

Press the buttons or to selectp q cfg Oﬀ and

con rm by pressing OK.

c f g O n

c f g O f f

The LEDs on the shutter button and all recei-cfg

vers within radio range go out. The radio command

for the timer has been con gured.

Table 6: Con guring the radio shutter timer as a transmitter

Product specificaties

Merk:	Hager
Categorie:	Niet gecategoriseerd
Model:	85745131
Internationale veiligheidscode (IP):	IP20
Aantal per verpakking:	1 stuk(s)
Bedrijfstemperatuur (T-T):	-5 - 45 °C
Aantal producten inbegrepen:	1 stuk(s)