Gys DHC 54 E Handleiding

Gys Niet gecategoriseerd DHC 54 E

Lees hieronder de 📖 handleiding in het Nederlandse voor Gys DHC 54 E (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/11
SCM54E
SWITCHING POWER, DIGITAL PROCESSING
BATTERY BUS CHARGER/MAINTAINER
=================================================
Specification:
Charges------------------------ 12V SLI, AGM, Gel Batteries
Input-------------------------------------220~240VAC 2A 50HZ
Charging Output Mode--------------------------------5 AMPS
Maintenance Output Mode---------------------Pulse Charge
Leads-------------------------------------------------------183 CM
Size----------------------------------------35.0 X 19.0 X 7.5 CM
Weight------------------------------------------------------2.5KGS
- GB.1-V1 -
SCM54E SWITCHING POWER, DIGITAL PROCESSING
BATTERY CHARGER/MAINTAINER
IMPORTANT SAFETY INSTRUCTIONS：
：
：
：：
1.
SAVE THESE INSTRUCTIONS – This manual contains important
safety and operating instructions for battery charger/maintainer
Model SCM54E.
2.
Use SCM54E only on 12 volts LEAD ACID, AGM and GELLED
ELECTROLYTE (GEL-CELL) batteries. Do not attempt to use on
other voltages and types of batteries (DRY CELL, NICKEL
CADMIUM, NICKEL METAL HYDRIDE, etc.) commonly found in
small home appliances. This may cause SCM54E and batteries to
burst, resulting in damage or injury to person and property.
SCM54E delivers up to 5 Amps.
3.
Do not expose SCM54E to direct sunlight, rain or snow.
4.
Do not use SCM54E on batteries that are in use or that are installed.
If necessary to remove batteries from the vehicle and take to a
properly installed SCM54E location.
5.
Do not use attachments with the SCM54E that are not recommended.
Non-recommended attachments may result in injury, electric shock,
or fire and voids the warranty.
6.
To reduce risk of damage to electric plug and cord, pull by plug
rather than cord when disconnecting charger.
7.
An extension cord should not be used unless absolutely necessary.
Use of improper extension cord could result in a risk of fire and
electric shock.
8.
Do not operate charger with damaged cord or plug – replace the cord
or plug immediately.
9.
Do not operate charger if it has received a sharp blow, been dropped,
or otherwise damaged in any way; take it to a qualified serviceman.
10.
Do not disassemble charger; take it to a qualified serviceman when
service or repair is required. Incorrect reassembly may result in a
risk of electric shock or fire
11.
To prevent injury during cleaning or maintenance, disconnect all
batteries and move them to clear access to the unit. Unplug
SCM54E from the wall outlet. Use a slightly dampened cloth to
clean the housing and lead sets. Do not use solvents or soaps.
- GB.2-V1 -
12.
Place the power cords in a location where they will not be stepped on,
tripped over, or subjected to stress or abuse of any kind.
13.
For fuse replacement, contact distributors for replacement. Any
tampering or incorrect assembly may result in fire or electric shock
and voids the warranty.
14.
Never attempt to charge a frozen battery. Allow the battery to
return to room temperature before connection. Suggested operation
range is in ambient temperature.
15.
Never use SCM54E in or on any boat or watercraft. You must
remove the battery from the boat or watercraft and charge the battery
at the properly installed location of SCM54E unit.
16.
Do not install SCM54E where it will be exposed to moisture or
inclement weather, or around combustibles like trash, flammable
liquids and vapors.
WARNING -- RISK OF EXPLOSIVE GASES
1.
WORKING IN THE VICINITY OF A LEAD ACID BATTERY IS
DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES
DURING NORMAL BATTERY OPERATION. FOR THIS
REASON, IT IS OF UTMOST IMPORTANCE THAT EACH TIME
BEFORE USING YOUR SCM54E, YOU READ THIS MANUAL
AND FOLLOW THE INSTRUCTIONS EXACTLY.
2.
To reduce risk of battery explosion, follow these instructions and
those published by the battery manufacturer and manufacturer of any
equipment you intend to use in the vicinity of the battery. Observe
cautionary markings on these items.
PERSONAL SAFETY PRECAUTIONS：
：
：
：：
1.
Someone should be within range of your voice or close enough to
come to your aid when you work near a lead acid battery.
2.
Have plenty of fresh water and soap nearby in case battery acid
contacts skin, clothing or eyes.
3.
Wear complete eye protection and protective clothing.
4.
Avoid touching eyes while working near battery.
5.
If battery acid contacts skin or clothing, wash immediately with soap
- GB.3-V1 -

Product specificaties

Merk: Gys
Categorie: Niet gecategoriseerd
Model: DHC 54 E

Heb je hulp nodig?

Als je hulp nodig hebt met Gys DHC 54 E stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Gys

Gys

Gys BMW C7502655 Handleiding

30 September 2024
Gys

Gys BMW C7502654 Handleiding

30 September 2024
Gys

Gys flash 158.12 CNT FV Handleiding

30 September 2024
Gys

Gys Startronic Supercap 12/24 V Handleiding

30 September 2024
Gys

Gys Cutter 105 CT Handleiding

30 September 2024
Gys

Gys flash 50.12 FV Handleiding

3 September 2024
Gys

Gys G11 Handleiding

8 Juli 2024
Gys

Gys flash 107.24 CNT FV Handleiding

18 Juni 2024
Gys

Gys P3 Auto Handleiding

27 Mei 2024
Gys

Gys pot PTI Premium PRO 220V Handleiding

9 April 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024