GVM Slider-80 Handleiding

GVM Niet gecategoriseerd Slider-80

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor GVM Slider-80 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/1
MOTORIZED SLIDER
GVM-Slider-80
GVM-Slider-120
ๅฐบๅฏธ๏ผš * ๆŠ˜ ้กต400 210mm 3 4
100.00 mm 100.00 mm
210.00 mm
100.00 mm
100.00 mm 100.00 mm 100.00 mm
1
1
1
11 Packing Lists
2
2
2
22 Mounting the slider and camera
1. Please charge the battery before using the slider.
2. Please๎˜install๎˜and๎˜use๎˜the๎˜slider๎˜as๎˜shown๎˜in๎˜the๎˜pictures.
1 Ball head and slider installation steps. (As shown below)๏ผ‰
1 2
1 2
3 Camera/camcorder installation steps. (As shown below)๏ผ‰
1
4 Shutter cable connection steps. (As shown below)๏ผ‰
1
2 Battery installation steps. (As shown below)๏ผ‰
1
3
3
3
33 Functional operation
Turn on power switch of slider, when power indicator flashes,
the ball head of slider automatically resets to move to right.
( When not connected, the indicator is red, after Bluetooth
connection, the indicator is green.)
Ball h ead*1 Lithium
batt ery *1
Batt ery
charger*1
Shutter
cable*6
Shutter
extension cab le*1
Slider bag*1
100.00 mm 100.00 mm
210.00 mm
100.00 mm
1.
Web: www.gvmled.com
B&H Email: bh@gvmled.com
GVM Email: support@gvmled.com
Amazon Email: amazonsupport@gvmled.com
Warehouse Add: 4301 N Delaware ave, unit D. PHILADELPHIA, PA19137, USA
2
2
2
Switch
LED Indicator
100.00 mm
3
Scan code to download GVM Slider APP and install it on your
phone โ†’ Open APP within 5 seconds, the "Bluetooth Device"
dialog box will pop up automatically โ†’ Click the Bluetooth
name "GVM-Slider80/120" and "Connect" within 10 seconds
to enter Single Slider Control APP Interface. At this time, the
APP Interface only display X axis, without Y and Z axis.
4
6
Ending Poi nt B Starting Point A
2.
If no "Bluetooth Device" dialog box pops up, you can click
"Research" again โ†’ Click "Connect" โ†’ within about 10
seconds to enter APP Interface. At this time, the APP
Interface only display X axis, without Y and Z axis.
3.
Common Shot
Following shoot
Pan-sh ot for Maximum angle 90ยฐ
Horizontal shooting:
Slider has three Photography Shooting Methods. You
can choose the following methods: Horizontal shooting /
Follow focus shooting and 90ยฐ Panorama shooting.
Manual mode :
4.
Automatic mode : Set key points5.
5 7
Video shooting โ†’ Manual mode (Gray) โ†’ Press left or right arrow
โ†’ Slider starts slowly at the beginning and stops slowly at the
end.
โ‘  Video shooting โ†’ Automatic mode โ†’ Set key point โ†’ Add
key point A (moving slider operation to any desired starting
point) โ†’ Confirm to save
โ‘ก Video shooting โ†’ Automatic mode โ†’ Set key point โ†’ Add key
point B ( Moving slider operation to any desired ending point ) โ†’
Confirm to save
Automatic mode: Stop at point6.
After successfully setting two key points A and B according to
"5. Set key points", the stop function can be executed.
Automatic mode: Automatic round-trip7.
After successfully setting two key points A and B according to
"5. Automatic mode: Set key points" , the automatic round-trip
function can be executed.
Video shooting โ†’ Automatic round-trip โ†’ Click arrow icon on the
right of "Auto round-trip" โ†’ Pop up the "Auto round-trip" setting
dialog box โ†’ Select key points to set starting point, ending point
and input setting times โ†’ Click "Start execution" โ†’ Slider moves
from current position to "starting point" position โ†’ Start to
perform automatic reciprocating action, from "starting point" to
"ending point" movement โ†’ When movement from "starting point"
to "ending point", automatically return to "starting point"
movement, until setting times are completed then stop exercising.
Video shooting โ†’ Stop at point โ†’ Click arrow icon on the right of
"Stop at point" โ†’ Pop up the "Stop at point" dialog box โ†’ Select
key points to set the starting and ending points โ†’ Click "Start
execution" โ†’ Slider moves from current position to the setting
"Starting point" position โ†’ Start to execute the stop action to the
point, moving from "Starting point" to "Ending point" โ†’ When
movement from "Starting point" to "Ending point", movement
stops and completes. Time-lapse shooting :8.
After successfully setting two key points A and B according to
"5. Set key points", the time-lapse shooting function can be
executed.
Time-lapse shooting โ†’ Set key points โ†’ Set starting point and
ending point โ†’ Set other parameters โ†’ Whether to go back and
forth โ†’ Choose yes and click start โ†’ Slider moves from current
position to "starting point" position โ†’ Start to execute action,
every time pause and take a picture, until all the setting number
of pictures is taken.
Tap the speed bar to slide left and right to change the speed (1%~
100%).
100.00 mm
9.
After setting time-lapse shooting parameters and starting shooting,
mobile phone connection can be taken away or disconnected, and
no need mobile phone during time-lapse shooting. Slider will
automatically complete the number of shooting and stop.
The camera Angle remains
constant. Loose the adjusting
rod's brake, adjusting rod on
the both feet center, lock the
brake.
Follow focus shooting:
The camera Angle follow focus
on the target. Loose the
adjusting rodโ€™ s brake,
adjusting rod to the upper left
corner and the lower right
corner, lock the brake.
90ยฐ Panorama shooting:
The camera Angle can be
90ยฐ shooting. Loose the
adjusting rodโ€™ s brake,
adjusting rod to the upper
right corner and the lower
left corner, lock the brake.

Product specificaties

Merk: GVM
Categorie: Niet gecategoriseerd
Model: Slider-80

Heb je hulp nodig?

Als je hulp nodig hebt met GVM Slider-80 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd GVM

GVM

GVM GT-J80D Handleiding

15 November 2024
GVM

GVM TQ-L Handleiding

28 Mei 2024
GVM

GVM TL15RS Handleiding

8 Juni 2023
GVM

GVM Y60D256 Handleiding

11 Mei 2023
GVM

GVM 50SM Handleiding

7 Mei 2023
GVM

GVM 1200D Handleiding

5 Mei 2023
GVM

GVM SD600S Handleiding

29 April 2023
GVM

GVM GT-60D Handleiding

20 April 2023
GVM

GVM TQ-LD Handleiding

11 April 2023
GVM

GVM 1000D Handleiding

10 April 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Electrolux

Electrolux ZS70GL Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024
Stamos

Stamos S-PLASMA 60U Handleiding

23 November 2024
Bosch

Bosch KSZ2AVU00 Handleiding

22 November 2024