Gtech LHT50 Handleiding
Gtech
Heggenschaar
LHT50
Lees hieronder de 📖 handleiding in het Nederlandse voor Gtech LHT50 (20 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 71 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/20
OPERATING MANUAL
Original Instructions
Lightweight
Hedge Trimmer
Model Number: LHT50
5360_LHT50_manual_aw_update.indd 1
5360_LHT50_manual_aw_update.indd 1
5360_LHT50_manual_aw_update.indd 1
5360_LHT50_manual_aw_update.indd 15360_LHT50_manual_aw_update.indd 1 01/02/2023 16:39
01/02/2023 16:39
01/02/2023 16:39
01/02/2023 16:3901/02/2023 16:39
2
GENERAL POWER TOOL SAFETY WARNINGS:
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE.
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
Do not use in rain or leave outdoors whilst raining.
WARNING: Read all safety warnings, instructions, illustrations, and
specifications provided with this power too. Failure to follow all
instructions listed below may result in electric shock, fire, and/or
serious injury. Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Work area safety
• Keep the work area clean and well-lit.
Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
• Only use in daylight or good artificial light.
Electrical safety
• Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce the risk of
electric shock.
• Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
• Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
• Do not abuse the charger cord. Never
use the charger cord for carrying, pulling
or unplugging the power tool. Keep the
charger cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled charger cords increase the risk of
electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
• If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
• Do not handle the charger or hedge trimmer
with wet hands.
Personal safety
• Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment
such as a dust mask, non-skid safety shoes,
hard hat or hearing protection used for
appropriate conditions will reduce personal
injuries.
• Prevent unintentional starting. Ensure
the switch is in the ‘Off’ position before
connecting to a power source and/or
battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have
the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
le attached to a rotating part of the power
tool may result in personal injury.
• Do not overreach. Keep proper footing
and balance at all times. This enables better
control of the power tool in unexpected
situations.
• Dress properly. Do not wear loose clothing
or jewellery. Keep your hair and clothing
away from moving parts. Loose clothes,
jewellery, or long hair can be caught in
moving parts.
• If devices are provided for the connection
5360_LHT50_manual_aw_update.indd 2
5360_LHT50_manual_aw_update.indd 2
5360_LHT50_manual_aw_update.indd 2
5360_LHT50_manual_aw_update.indd 25360_LHT50_manual_aw_update.indd 2 01/02/2023 16:39
01/02/2023 16:39
01/02/2023 16:39
01/02/2023 16:3901/02/2023 16:39
3
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
• Do not let familiarity gained from frequent
use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause
severe injury within a fraction of a second.
Power tool use and care
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at
the rate for which it was designed.
• Do not use the power tool if the switch
does not turn it on or off. Any power tool
that cannot be controlled by the switch is
dangerous and must be repaired.
• Disconnect the charger from the power
source and/or remove the battery pack,
if detachable, from the power tool before
making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measure reduces the risk of
starting the power tool accidentally.
• Store idle power tools out of way of children
and do not allow persons unfamiliar with
the hedge trimmer or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
• Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the power
tool’s operation. If damaged, have the
hedge trimmer repaired before use. Many
accidents are caused by poorly maintained
power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
• Use the power tool, accessories, and
tool bits etc in accordance with these
instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a
hazardous situation.
• Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
Service
• Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
• Do not attempt to repair any damaged
parts on the hedge trimmer unless you are
qualified to do so.
• Only use replacement parts or accessories
provided by or recommended by Gtech.
Hedge Trimmer safety warnings
• Keep all parts of the body away from the blade.
Do not remove cut material, or hold material
to be cut, when the blades are moving. Blades
continue to move aer the switch is turned off.
A moment of inattention while operating the
hedge trimmer may result in serious personal
injury.
• Carry the hedge trimmer by the handle with
the cutter blade stopped and taking care not
to operate any power switch. Proper carrying
of the hedge trimmer will decrease the risk
of inadvertent starting and resultant personal
injury from the blade.
• When transporting or storing the hedge
trimmer, always fit the blade cover. Proper
handling of the hedge trimmer will decrease
the risk of personal injury from the blades.
• When clearing jammed material or servicing
the unit, make sure all power switches are
off and the power cord and/or battery pack
is removed or disconnected. Unexpected
actuation of the hedge trimmer while clearing
jammed material or servicing may result in
serious personal injury.
• Hold the hedge trimmer by insulated
gripping surfaces only, because the cutter
blade may contact hidden wiring or its own
cord. Blades contacting a ‘live’ wire may
make exposed metal parts of the hedge
trimmer ‘live’ and could give the operator an
electric shock.
• Keep all power cords and cables away from
the cutting area. Power cords or cables may
be hidden in hedges or bushes and can be
accidentally cut by the blade.
• Do not use the hedge trimmer in bad
weather conditions, especially when there is
a risk of lightning. This decreases the risk of
5360_LHT50_manual_aw_update.indd 3
5360_LHT50_manual_aw_update.indd 3
5360_LHT50_manual_aw_update.indd 3
5360_LHT50_manual_aw_update.indd 35360_LHT50_manual_aw_update.indd 3 01/02/2023 16:39
01/02/2023 16:39
01/02/2023 16:39
01/02/2023 16:3901/02/2023 16:39
Product specificaties
| Merk: | Gtech |
| Categorie: | Heggenschaar |
| Model: | LHT50 |
Heb je hulp nodig?
Als je hulp nodig hebt met Gtech LHT50 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Heggenschaar Gtech
19 Juni 2023
Handleiding Heggenschaar
- Heggenschaar Bosch
- Heggenschaar DeWalt
- Heggenschaar Karcher
- Heggenschaar WOLF-Garten
- Heggenschaar Al-ko
- Heggenschaar Atika
- Heggenschaar Batavia
- Heggenschaar Bavaria
- Heggenschaar Black Decker
- Heggenschaar Brandson
- Heggenschaar Budget
- Heggenschaar Dolmar
- Heggenschaar Echo
- Heggenschaar Efco
- Heggenschaar Einhell
- Heggenschaar Eurogarden
- Heggenschaar Ferm
- Heggenschaar Ferrex
- Heggenschaar Florabest
- Heggenschaar Flymo
- Heggenschaar Fuxtec
- Heggenschaar Gamma
- Heggenschaar Garden Feelings
- Heggenschaar Garden Groom
- Heggenschaar Gardena
- Heggenschaar Gardenline
- Heggenschaar Gartenmeister
- Heggenschaar Greenworks
- Heggenschaar Grizzly
- Heggenschaar Gude
- Heggenschaar Hanseatic
- Heggenschaar Hikoki
- Heggenschaar Hitachi
- Heggenschaar Hoberg
- Heggenschaar Homelite
- Heggenschaar Honda
- Heggenschaar Husqvarna
- Heggenschaar Hyundai
- Heggenschaar Kaaz
- Heggenschaar Kibani
- Heggenschaar Kingcraft
- Heggenschaar Kress
- Heggenschaar Levita
- Heggenschaar Lux Tools
- Heggenschaar Makita
- Heggenschaar McCulloch
- Heggenschaar Metabo
- Heggenschaar Milwaukee
- Heggenschaar Mr Gardener
- Heggenschaar Parkside
- Heggenschaar Pattfield
- Heggenschaar Powerpeak
- Heggenschaar Powerplus
- Heggenschaar Remington
- Heggenschaar Robust
- Heggenschaar Ryobi
- Heggenschaar Scheppach
- Heggenschaar Shindaiwa
- Heggenschaar Skil
- Heggenschaar Sterwins
- Heggenschaar Stiga
- Heggenschaar Stihl
- Heggenschaar Tanaka
- Heggenschaar Tel Sell
- Heggenschaar Texas
- Heggenschaar Toledo
- Heggenschaar Topcraft
- Heggenschaar Trotec
- Heggenschaar Varo
- Heggenschaar Vonroc
- Heggenschaar Worx
- Heggenschaar Yardforce
- Heggenschaar Zipper
- Heggenschaar Ozito
- Heggenschaar Black And Decker
- Heggenschaar Cocraft
- Heggenschaar Meec Tools
- Heggenschaar Cotech
- Heggenschaar Fieldmann
- Heggenschaar McGregor
- Heggenschaar Sun Joe
- Heggenschaar Challenge
- Heggenschaar Cramer
- Heggenschaar EGO
- Heggenschaar Grouw
- Heggenschaar Hurricane
- Heggenschaar MacAllister
- Heggenschaar Maruyama
- Heggenschaar Sovereign
- Heggenschaar Spear & Jackson
- Heggenschaar CMI
- Heggenschaar Powerworks
- Heggenschaar Craftsman
- Heggenschaar Verto
- Heggenschaar G-Technology
- Heggenschaar Jonsered
- Heggenschaar Qualcast
- Heggenschaar Bestgreen
- Heggenschaar Baumr-AG
- Heggenschaar Martha Stewart
- Heggenschaar Mac Allister
- Heggenschaar Deltafox
- Heggenschaar Anova
- Heggenschaar Challenge Xtreme
- Heggenschaar Palmera
- Heggenschaar Proviel
- Heggenschaar LawnMaster
- Heggenschaar Ergotools Pattfield
- Heggenschaar Maxbear
- Heggenschaar Yellow Garden Line
- Heggenschaar Turbo-Silent
Nieuwste handleidingen voor Heggenschaar
21 December 2024
17 December 2024
20 December 2024
17 December 2024
17 December 2024
5 December 2024
1 Oktober 2024
1 Oktober 2024
3 December 2024
1 December 2024