Grizzly G0555 Handleiding

Grizzly Zaagmachine G0555

Lees hieronder de 📖 handleiding in het Nederlandse voor Grizzly G0555 (68 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/68
MODEL G0555/G0555P
ULTIMATE 14" BANDSAW
OWNER'S MANUAL
COPYRIGHT © AUGUST, 2002 BY GRIZZLY INDUSTRIAL, INC., REVISED SEPTEMBER, 2017 (AB)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
FOR MODELS MANUFACTURED SINCE 5/11 #TR4508 PRINTED IN TAIWAN
252923
Model
G0555
Model
G0555P
This manual provides critical safety instructions on the proper setup,
operation, maintenance, and service of this machine/tool. Save this
document, refer to it often, and use it to instruct other operators.
Failure to read, understand and follow the instructions in this manual
may result in fire or serious personal injury—including amputation,
electrocution, or death.
The owner of this machine/tool is solely responsible for its safe use.
This responsibility includes but is not limited to proper installation in
a safe environment, personnel training and usage authorization,
proper inspection and maintenance, manual availability and compre-
hension, application of safety devices, cutting/sanding/grinding tool
integrity, and the usage of personal protective equipment.
The manufacturer will not be held liable for injury or property damage
from negligence, improper training, machine modifications or misuse.
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to the State
of California to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement and other masonry products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
Work in a well ventilated area, and work with approved safety equip-
ment, such as those dust masks that are specially designed to filter
out microscopic particles.
Table of Contents
INTRODUCTION 2 ...............................................
Manual Accuracy ........................................... 2
Contact Info.................................................... 2
Machine Description ...................................... 2
Identification ................................................... 3
Machine Data Sheet ...................................... 4
SECTION 1: SAFETY ....................................... 6
Safety Instructions for Machinery .................. 6
Additional Safety for Bandsaws ..................... 8
SECTION 2: POWER SUPPLY ........................ 9
SECTION 3: SETUP ....................................... 12
Needed for Setup ......................................... 12
Unpacking .................................................... 12
Hardware Recognition Chart ....................... 13
Inventory ...................................................... 14
Cleanup ........................................................ 15
Site Considerations ...................................... 16
Assembly ..................................................... 17
Blade Center Tracking ................................. 21
Dust Collection ............................................. 22
Power Connection........................................ 23
Test Run ...................................................... 23
Tensioning Blade ......................................... 24
Adjusting Blade Support Bearings ............... 25
Adjusting Blade Guide Bearings .................. 26
Table Tilt Calibration .................................... 28
Aligning Table .............................................. 29
Aligning Fence ............................................. 30
SECTION 4: OPERATIONS ........................... 31
Operation Overview ..................................... 31
Disabling & Locking Switch.......................... 32
Workpiece Inspection................................... 32
Guide Post ................................................... 33
Table Tilt ...................................................... 33
Blade Speed ................................................ 34
Blade Information ......................................... 35
Blade Change .............................................. 37
Basic Cutting Tips ........................................ 38
Cutting Options ............................................ 38
Ripping ......................................................... 38
Crosscutting ................................................. 39
Resawing ..................................................... 39
Cutting Curves ............................................. 40
Stacked Cuts................................................ 40
SECTION 5: ACCESSORIES ......................... 41
SECTION 6: MAINTENANCE ......................... 43
Schedule ...................................................... 43
Cleaning & Protecting .................................. 43
Lubrication ................................................... 44
Redressing Rubber Tires ............................. 44
SECTION 7: SERVICE ................................... 45
Troubleshooting ........................................... 45
V-Belt Tension ............................................. 47
Replacing V-Belt .......................................... 48
Shimming Table ........................................... 48
Wheel Alignment .......................................... 49
Blade Lead ................................................... 52
Blade Tensioner ........................................... 53
Fence Scale Calibration ............................... 54
SECTION 8: WIRING ...................................... 55
Wiring Safety Instructions ............................ 55
Wiring Diagram ............................................ 56
SECTION 9: PARTS ....................................... 57
Main ............................................................. 57
Stand ............................................................ 60
Fence ........................................................... 61
Labels .......................................................... 62
WARRANTY AND RETURNS ........................ 65

Product specificaties

Merk: Grizzly
Categorie: Zaagmachine
Model: G0555

Heb je hulp nodig?

Als je hulp nodig hebt met Grizzly G0555 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Grizzly

Grizzly

Grizzly EHS 900 L-Set Handleiding

3 April 2024
Grizzly

Grizzly EHS 750-69D Handleiding

3 April 2024
Grizzly

Grizzly EHS 460-2 T Handleiding

3 April 2024
Grizzly

Grizzly AKS 2040-25 Lion Set Handleiding

27 Maart 2024
Grizzly

Grizzly G0555 Handleiding

27 Juli 2023
Grizzly

Grizzly G0555P Handleiding

27 Juli 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Bosch

Bosch PKS 55 Handleiding

23 November 2024
Shindaiwa

Shindaiwa 269TS Handleiding

19 November 2024
Shindaiwa

Shindaiwa 320TS Handleiding

19 November 2024
Shindaiwa

Shindaiwa 488 Handleiding

19 November 2024
Shindaiwa

Shindaiwa 352s Handleiding

19 November 2024
Ergotools Pattfield

Ergotools Pattfield E-PST 800 L Handleiding

19 November 2024
Bavaria By Einhell

Bavaria By Einhell Bavaria BFS 600 E Handleiding

19 November 2024
Bavaria By Einhell

Bavaria By Einhell Bavaria BSTL 800 Profi Handleiding

19 November 2024
Proviel

Proviel STL 800 Handleiding

19 November 2024
Proviel

Proviel PVBK 40 Handleiding

19 November 2024