Greenworks GDC40 Handleiding

Greenworks Hogedrukreinigers GDC40

Lees hieronder de 📖 handleiding in het Nederlandse voor Greenworks GDC40 (151 pagina's) in de categorie Hogedrukreinigers. Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/151

40V High Pressure washer

Hochdruckreiniger 40 V

Hidrolimpiadora 40V

Idropulitrice ad alta pressione 40 V

Nettoyeur haute pression 40V

USER’S MANUAL

BEDIENUNGSANLEITUNG

MANUAL DE UTILIZACIÓN

MANUALE D’USO

MANUE L D’UTILISATION

Lavadora de alta pressão de 40V MANUAL DE UTILIZAÇÃO

40V Hogedrukreiniger GEBRUIKERSHANDLEIDING

 

40 V korkeapainepesuri KÄYTTÄJÄN KÄSIKIRJA

Högtryckstvätt 40 V INSTRUKTIONSBOK

40 V høytrykksspyler BRUKSANVISNING

40V højtryksrenser BRUGERVEJLEDNING

 

 NÁVOD K OBSLUZE

 

 INSTRUKTIONSBOK

 

40 V-os magasnyomású mosó HASZNÁL ATI ÚTMUTATÓ

 MANUAL DE UTILIZARE

 

 

  40

 KULLANICI KILAVUZU

  40

 NAUDOJIMO VADOVAS

 

40V survepesur KASUTAJAUHEND

103

107

GDC40

SPECIFICATIONS

Model GDC40

Rated Voltage 40V

Rated Pressure 5.5 MPa

Permissible Pressure 7 MPa

Power Rating 650W

Rated Water Flow 3.7 l/min

Maximum Water Flow 5 l/min

Maximum Water Inlet

Pressure 0.7 MPa

Maximum Water Inlet

Temperature 40℃

LPA(sound pressure

level) 76.38dB(A),K:3.0db(A)

LWA(sound power level) 92.34dB(A),K:3.0db(A)

Protection Degree IPX 5

Vibration < 2.5 m/s² K=1.5 m/s²

Battery 29717/ 29727

Charger 2910907

DESCRIPTION

See figure 1.

1. Handle

2. ON/OFF Switch

3. Water outtake

4. Bucket

5. Bucket buckle

6. Base unit

7. Battery door

ASSEMBLY

UNPACKING

This product requires assembly.

Carefully open the carton, then remove the product

and any accessories from the carton.

If in doubt, call Greenworks Tools Customer Service

for assistance. Operation of a product that may have

been improperly preassembled could result in serious

personal injury.

Inspect the product carefully to make sure no

breakage or damage occurred during shipping.

Do not discard the packing material until you have

carefully inspected and satisfactorily operated the

product.

If any parts are damaged or missing, please contact

Greenworks Tools Customer Service for assistance.

WARNING

If any parts are damaged or missing do not operate

this product until the parts are replaced. Use of this

product with damaged or missing parts could result

in serious personal injury.

WARNING

Do not attempt to modify this product or create

accessories not recommended for use with this

product. Any such alteration or modiﬁ cation is

misuse and could result in a hazardous condition

leading to possible serious personal injury.

WARNING

Do not connect to power supply until assembly is

complete. Failure to comply could result in accidental

starting and possible serious personal injury.

PACKING LIST

- Main machine

- Manual

- Detergent tank

- Adjustable fan jet nozzle

- High pressure hose

- Trigger and wand

- Bucket

ASSEMBLING THE SPRAY WAND (See Figure 2.)

Installing Wand to Pressure Washer Gun Insert the

male baynet end (8) of the wand into the female

bayonet outlet (9) firmly.While pushing in the wand

firmly,turn clockwise until tabs lock into place to

ensure a leak-free connection.

ASSEMBLING THE BUCKET (See Figure 3.)

Align the water inlet (10) on the base unit with the

outlet(11) on the bottom of the bucket, and seat the

bucket on the base unit.

Check alignment to ensure a proper seal and

connection.

Flip up the buckles on the base unit and latch to

bucket. Press down on the buckle ends to lock the

bucket to the base unit

BTTERY INSTALLATION (See Figure 4.)

Open the door of the battery housing.

Align groove in battery pack with raised rib on

pressure washer.

Make sure the latch on the pressure washer snaps

in place and that battery pack is secured in pressure

washer before beginning operation.

Close the door.

BATTERY REMOVEL (See Figure 4.)

Set the switch to the OFF position.

Press the button and take out the battery.

OPERATION

Applications

This pressure washer can be used for the purposes

listed below:

Removing dirt and mould from decks, cement

patios, and walls.

Cleaning cars, boats, motorcycles, outdoor furniture

and barbeques.

CONNECTING HIGH PRESSURE HOSE (See Figure

5.)

Fiting

Push the connector (12) of the high pressure hose

into the mount (13) on the trigger handle until it

engages.

Removing

Actuate the spring button (14) and pull the high

pressure hose out of the mount.

WARNING

The washer must be used on a secure and stable

surface in a standing, upright position.

ADDING WATER TO THE BUCKET (See Figure 6.)

The water supply must come from a water main.

NEVER use hot water or water from ponds, lakes, etc.

For ease of use, a self-coiling hose (not provided) is

recommended.

WARNING

Always switch off the mains disconnecting switch

when leaving the machine unattended

WARNING

Do not ﬁll the bucket with the bucket still ﬁxed on

the base unit.

Before adding water to the bucket:

Inspect the filter in the water intake.

If the filter is damaged, do not use the machine until

the filter has been replaced.

CONNECTING THE WATER SUPPLY TO PRESSURE

WASHER (See Figure 7.)

NOTE: If you do not want to use the bucket, you can

use the base unit directly as a pressure washer.

Connect a garden hose to the water inlet.

Attach a garden hose to water supply.

CAUTION

When connecting the appliance to the water sup-

ply mains (not public drinking water supply mains),

please observe the local regulations of local boards

or local water supplier.

To ensure that there is no feedback of contaminant

into the water supply, the appliance must not be con-

nected directly to the public drinking water supply

mains.

If the appliance is connected to potable water mains,

backow prevention devices should be incorporated

in or ﬁxed to the water supply system. The instal-

lation should be accepted by local boards or water

supplier and should be conducted by professional

technical personnel. The backow prevention de-

vices should be appropriate to uid categories and

comply with the requirement to avoid back siphon-

age according to EN 60335-2-79:2009.

USING THE GUN (See Figure 8.)

For greater control and safety, keep both hands on the

gun at all times.

Squeeze the trigger (15) to operate the pressure

washer.

Release the trigger to stop the flow of water through

the nozzle.

Product specificaties

Merk:	Greenworks
Categorie:	Hogedrukreinigers
Model:	GDC40

Heb je hulp nodig?

Als je hulp nodig hebt met Greenworks GDC40 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Hogedrukreinigers Greenworks

Greenworks GDC40 Handleiding

4 Oktober 2022

Greenworks 51012 Handleiding

4 Oktober 2022

Handleiding Hogedrukreinigers

Nieuwste handleidingen voor Hogedrukreinigers

Worx WG649 Handleiding

4 Oktober 2022

Ozito PWVCK-1312 Handleiding

4 Oktober 2022

Worx WG644 Handleiding

4 Oktober 2022

Eurom H150 Handleiding

4 Oktober 2022

Black And Decker BXPW1400PE Handleiding

4 Oktober 2022

Kranzle Profi 160 TST Handleiding

4 Oktober 2022

Stiga HPS 235 R Handleiding

4 Oktober 2022

Yard Force YF1600A1 Handleiding

4 Oktober 2022

Stiga HPS 110 Handleiding

4 Oktober 2022

Kranzle 2175 TST Handleiding

4 Oktober 2022