GRE PP202 Handleiding

GRE Waterpomp PP202

Lees hieronder de 📖 handleiding in het Nederlandse voor GRE PP202 (82 pagina's) in de categorie Waterpomp. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/82
HIMPP077H/PP102/PP152/PP202.24
Instruction Manual - Manual de Instrucciones
Manuel d´instructions - Bedienungsanleitung
Manuale delle instruzioni - Handleiding met instructies
Manual de instruções - Instrukcja obsługi - Návod k použití - Návod na
použitie - Manual Instrucţiuni - Instruktionshandbok
www.grepool.com
Pumps
Bombas
Pompes
Pumpen
Pompe
Pomps
Bombas
Pompy
Čerpadla
Čerpadla
Pompe
EN
ES
FR
DE
IT
NL
PT
PL
CS
SK
Ref. PP077H (0,75 CV) / PP102 (1 CV) / PP152 / PP202 (1,5 CV) (2 CV)
RO
DISTRIBUTED BY - DISTRIBUIDO POR - DISTRIBUÉ PAR- VERTRIEB DURCH - DISTRIBUITO DA - GEDISTRIBUEERD DOOR - DISTRIBUÍDO POR - WYPRODUKOWANY PRZEZ -
DISTRIBUTOR - DISTRIBÚTOR DISTRIBUIT DE - DISTRIBUERAD AV- :
MANUFACTURAS GRE S.A. - ARITZ BIDEA Nº 57 BELAKO INDUSTRIALDEA - APARTADO 69 - 48100 MUNGUIA (VIZCAYA) ESPAÑA
Nº REG. IND.: 48-06762
MADE IN CHINA - FABRICADO EN CHINA - FABRIQUÉ AU CHINE - HERGESTELLT IN CHINA - PRODOTTO IN CHINA - GEPRODUCEERD IN CHINA - FABRICADO NA RPC - WYPRO-
DUKOWANO W CHINACH - VYROBENO V ČÍNĚ - VYROBENÉ V ČÍNE - FABRICAT ÎN CHINA - TILLVERKAD I KINA
Premium
2
Self-priming swimming pool pump
SAFETY INSTRUCTIONS. READ CAREFULLY
• Our pumps may only be assembled and installed in pools compliant with standards
IEC/HD 60364-7-702 and required national rules.
• The installation should follow standard IEC/HD 60364-7-702 and required national rules
for swimming pools. Consult your local dealer for more information.
• The pump can not be installed in Zone 0 (Z0) or Zone 1 (Z1). To see drawings refer to pa-
ges 61, 62 and 63.
• The electrical installation should be performed by professional staff qualified in electri-
cal installations.
• The apparatus must not be on while the pool is being used.
• Do not operate the apparatus unless it is properly primed.
• NEVER touch the apparatus when it is operating if you are wet or have wet hands.
• When handling the pump, DISCONNECT the power supply.
• Make sure that the ground is dry before touching the electrical equipment.
• Do not install the apparatus where it could become wet, as it may cause electrocution.
• This appliance is not intended for use by persons (including children) with reduced phy-
sical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not
play with the appliance.
• This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
• If the supply flex of the apparatus is damaged, it should be replaced. Read the instruc-
tions carefully to replace it. If in doubt, contact the technical service.
This mode allows making a correct installation with optimal results of your swimming
pool pump. Carefully read this instruction manual.
Your new pump is a one-stage self-priming, centrifugal pump, designed for use with a
swimming-pool filtering system. It is designed to be used with clean water for tempe-
ratures between 5 ºC and 35 ºC. It is manufactured from high quality materials subject
to strict hydraulic and electrical tests. A correct installation of this pump is assured by
following the instructions from this manual. We decline all responsibility for damages
caused by use different to that explained in this instruction manual.
IMPORTANT
This manual contains basic information on the safety measures to be adopted during
installation and start- up. The fitter and the user must therefore read the instructions be-
fore installation and start-up.
GENERAL SAFETY REGULATIONS
• The machines indicated in this Manual are especially designed for the pre-filtering and
recirculation of water in swimming pools
• Install them in line with the specific instructions for each installation
• All modifications to the pump require prior authorisation from the manufacturer. Origi-
nal spare parts and accessories authorised by the manufacturer ensure greater safety.
The pump manufacturer is exempt from all liability regarding any damage caused by
EN
3
unauthorised spare parts or accessories.
• When working on each machine or on the units linked to them, disconnect the unit
from the power supply and the startup devices, as the electrical parts of the pump
are live during operation.
• All assembly and maintenance work must be carried out by qualified and authori-
sed personnel who have carefully read the installation and service instructions.
• To guarantee safety when operating the machine, you must comply with that set
out in the installation and service instructions.
• In the event of defective operation or faults, contact your supplier or nearest repre-
sentative.
• If the power supply cable is damaged, the manufacturer, its after-sales service of
qualified technicians, should replace it in order to avoid hazards.
• The device should be connected to electricity outlet with earth connection, protected
by a Residual Current circuit breaker that does not exceed 30 mA.
• Make sure that water is unable to enter the motor or the live electrical parts.
• Avoid contact at all times - even accidentally - with moving machine parts while the
machine is running and/or before it comes to a complete standstill
• Wait for the machine to come to a halt before handling it.
• Before any electrical or mechanical maintenance operation, disconnect the unit
from the power supply and block the start-up devices.
• To reduce risk of injury, children should not use this product.
• Do not bury the electric cable. Lay the cable so it cannot be damaged by machi-
nery, like mowing machines, etc.
• Do not start the pump before it is correctly connected to the swimming pool.
• To reduce risk of electric shock, change the electric cable immediately when dama-
ged.
• To reduce risks of electric shock, do not use extension cables to connect the p mp to a
power supply. Connect it to a correctly installed electricity outlet.
• Do not use the pump without water!
INSTALLATION
• Only authorised and qualified personnel should install the pump and its cabling,
respecting the current legislation.
• The pump should be installed horizontally, screwing it to the support, to avoid vibra-
tion and unwanted noise.
• The pump should be installed far from any corrosive or flammable products.
• The pump should have sufficient drainage to avoid risk of flooding and should be
protected from excessive humidity.
• Install independent water inlet and outlet valves.
• Allow for sufficient access space for pump maintenance and make sure that the te-
chnical plate of the pump is visible.
• During the installation of the pump, position it so there is 1 meter of free space
around it.
ELECTRICAL INSTALLATION
• Place the motor on the floor before connecting it to the mains. Otherwise, the motor
could cause a serious and even mortal electric shock. Do not place it on the floor over
a gas pipe.
• To avoid a dangerous or mortal electric shock, disconnect the power supply of the


Product specificaties

Merk: GRE
Categorie: Waterpomp
Model: PP202

Heb je hulp nodig?

Als je hulp nodig hebt met GRE PP202 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Waterpomp GRE

GRE

GRE PP202 Handleiding

11 Maart 2024

Handleiding Waterpomp

Nieuwste handleidingen voor Waterpomp