GoldenEar Technology BRX Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor GoldenEar Technology BRX (10 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
Owner’s Manual
Ultra-High-Performance Bookshelf/Stand-Mount Speaker
BRX
BOOKSHELF REFERENCE X
GoldenEar Technology
8
BRX Manual
Bookshelf Reference X Owner’s Manual
2
Congratulations!
Congratulations and thank you for purchasing GoldenEar Technology’s® BRX speakers! You are about to hear
the spectacular difference these very special speakers will make in your music and/or home theater system!
Our engineers’ many years of experience in developing loudspeakers has led to this extraordinary product. In order
to ensure that you experience maximum performance, please take a moment to fully read this owner’s manual and
familiarize yourself with the unique installation, assembly and set-up procedures for your BRX speakers.
Please visit our website at www.GoldenEar.com for more information on the technology behind your new speaker
system. If you have additional questions, contact your Authorized GoldenEar Technology® Dealer or visit the
Q&A page in the Tech Support section of our website.
Your New GoldenEar Speakers
GoldenEar BRX speakers are designed to t beautifully in a wide variety of applications. Their compact
dimensions allow for easy installation in many locations within your home. To get the best performance possible
and for a product that lasts a lifetime, we strongly recommend that you follow the placement and setup
guidelines provided in this manual.
Cleaning
Do not use a strong or abrasive cleaner on your new speakers. Clean them only with a damp cloth, but do not
get them wet. Do not set wet objects on top of the speakers as they may damage the enclosure.
GoldenEar Technology
8
BRX Manual 3
Preventing Speaker Damage
GoldenEar Technology BRX speakers are ef cient and can be driven to loud listening levels with moderate
ampli er power. They are also able to handle the output of very powerful ampli ers. To prevent damage to your
speakers, please read all of the following guidelines before hooking them up.
Ampli er Distortion — #1 Threat to your New Speakers!
Ampli er distortion is the principal cause of speaker damage. When listening at loud levels your ampli er may run
out of clean power. It will then begin to produce speaker-damaging distorted power. This will damage any brand of
speaker very quickly! More powerful ampli ers are actually safer – For example: A 40 Watt/channel ampli er
will have substantial distortion above 40 Watts. If driven to 50 Watts, this ampli er will deliver speaker-damaging
distorted power! But a 100 Watt/channel ampli er will have very low distortion below 100 Watts. Therefore, when the
speaker requires 50 Watts, this more powerful ampli er will deliver clean power and speaker damage is less likely to
occur. (See your GoldenEar Technology dealer for ampli er recommendations.)
Volume Setting
Do not be fooled by the Volume setting of your receiver/preampli er. It only adjusts listening level — it is not
a “power-output” dial. The amount of ampli er power actually used at a given Volume setting depends solely
on the nature of the source material you are listening to (at a given Volume setting a quiet section of music will
use less ampli er power than a loud section). With typical material, the rated output power of many receivers/
ampli ers is often reached when the Volume is set to around -10dB, or between the “11” and “1 o’clock”
settings with an analog control (with bass/ treble and loudness controls not used — otherwise rated power may
be reached at even lower Volume settings). Remember, all ampli ers produce distortion when operated beyond
their rated output power. The resulting distortion will damage all speakers! If you listen at loud levels, be careful to
listen for the point of audible distortion — if the speakers begin to sound distressed, turn the Volume down or your
speakers and/or ampli er(s) will be damaged! This type of damage constitutes abuse and is not covered by the
warranty. If louder volumes are desired, consider a more powerful ampli er.
There is Actually a Limit!
Even with these safer, more powerful ampli ers, there is a point at which you could have more power than the
speaker can handle. At that point you will overpower the speaker and damage it. At loud levels do not increase
bass/treble controls from zero and ensure that all loudness/contour/bass EQ buttons are off (otherwise rated
output power will be reached at even lower volume control settings).
USE AN APPROPRIATE AMPLIFIER. At high volumes a very powerful ampli er can overdrive your
speakers and damage them. And if the ampli er is not powerful enough, it can produce distortion
that can easily damage your speaker. (Consult your dealer for assistance.)
DON’T BE FOOLED BY YOUR RECEIVER’S VOLUME CONTROL. It only adjusts how loud, it is not an
indication of power output. If your speakers begin to sound harsh or grating or if you hear other forms
of distortion, turn down the volume immediately!
PROPER SETUP IS THE KEY. Please Note: Avoid use of tone controls and loudness controls as they will
demand even more power from an ampli er.


Product specificaties

Merk: GoldenEar Technology
Categorie: Speaker
Model: BRX

Heb je hulp nodig?

Als je hulp nodig hebt met GoldenEar Technology BRX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker GoldenEar Technology

Handleiding Speaker

Nieuwste handleidingen voor Speaker