Godox VL150 Handleiding

Godox Niet gecategoriseerd VL150

Lees hieronder de 📖 handleiding in het Nederlandse voor Godox VL150 (13 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/13



INSTRUCTION MANUAL

LED/LED Video Light

705-VL0000-00

/Add:       2 1 4 4 1 4

1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community,

Fuhai Street, Bao’an District, Shenzhen, China

/Tel: +86-755-29609320(8062) /Fax: +86-755-25723423

/E-mail: godox@godox.com http://www.godox.com



GODOX Photo Equipment Co., Ltd.

Made In China

Body

Main Body

LCD Panel

Main Body

- 09 - - 10 -

Protect Cover

LED Light

Umbrella Input

Bracket Sleeve

Bowens Mount

Accessory

Locking Ring

Thermovent 3

Power Input

Socket

Thermovent 2

Bracket Locking Ring

Power Switch

Control Panel Group/Channel

Button

Select Dial for

Light Brightness

Bluetooth

Antenna 433MHz Antenna

Battery

Compartment

Power Input

Output

Control Port

Thermovent 1

Thermovent 2

1. LED video light 2. Controller 3. Adapter 4. Power cord 5. Connect cord

6. Remote control 7. Reflector for Bowens mount LED light 8. Lamp cover

9. Portable bag 10. Instruction manual

Included Items

Thermovent 1

Handle

Fan Inlet

U-type Bracket

6 78 9

Power Supply

1. Firstly, plug the two ends of

connect cord separately into

the controller’s output control

port and the light’s power input

socket. A “click” will be heard

once finished.

2. Plug the output end of adapter’s connect cord into

controller’s power input end.

3. Use the power cord to connect the power supply.

Operation

1. Power on/off: long press the Power Switch of controller to

power the LED light on or off.

2. Choose group/channel: press GR/CH button for once, and

turn the Select Dial for Light Brightness to change the channel

value. Then, press GR/CH button again, and turn the Select Dial

for Light Brightness to change the group value (the group figure

will be displayed recurrently). Press GR/CH button to exit.

3. Light brightness adjustment: turn the select dial for light

brightness to change the value from 0% to 100%.

4. Power option: press the GR/CH button and power the light

on to enter power option mode. Turn the brightness select dial to

choose power from 300, 250 and 200. The power is 300W by

default. Exit from this mode automatically without operation for 5

seconds.

1. With 433 MHz wireless system, VL series have remote grouping and control function. Up to

6 groups of LED lights can be controlled. 16 channels are available with strong anti-

interference capability. Please set the channels and groups of LED light to the same as those

of RC-A5II remote control before usage.

Adjusting Channel/Group of the Controller

● Press the GR/CH button and the channel icon blinks. Turn the select dial for light brightness

to choose a channel ID (1 to 16).

● Press the GR/CH button twice and the group icon blinks. Turn the select dial for light

brightness or color temperature to choose a group ID (A to F).

Adjusting Channel/Group of the Remote Control

● Press the CH/GRP button and the group icon blinks. Press the “-” or “+” button to choose a

group ID (A to F).

● Press the CH/GRP button twice and the channel icon blinks. Press the “-” or “+” button to

choose a channel ID (1 to 16).

Adjusting Light Brightness with the Remote Control

● Press the “-” or “+” button to adjust the light brightness.

- 11 - - 12 -

Wireless Control (433MHz wireless & smartphone APP through Bluetooth)

Note: The wireless signal can be received only when the controller is power on.

2. Godox VL series LED lights can also be controlled by smartphone APP through Bluetooth

with 6 groups and 16 channel.

● Bluetooth connection: power the LED light on and long press the GR/CH button until a

Bluetooth ID is displayed on the controller. Then, open the “GodoxPhoto”APP, click the

Bluetooth and choose the corresponding Bluetooth ID of the controller. Finally, enter the

password (the initial password is “000000”), and the Bluetooth is successfully connected.

Note: The channels and groups of LED controller and APP should be adjusted to the same.

● LED control: please find more details in

the “GodoxPhoto” APP of smartphone:

Setting---Help---LED.

GR/CH

BRIGHTNESS

GR/CH

BRIGHTNESS

蓝牙主页

3965

E965

4659

其他设备

清除设备

12:00

3893

Note: If using V-port battery, please insert the battery into the LED light and power it

on for usage.

Note: This function is used for the situation that the battery enter to protection states and cannot word due

to some v-port battery doesn't output the corresponding power in strong power output. When enter this

mode, the output power of the light can be decreased and the battery can be loaded instead of being

protected (this function only applies to VL300).

Product specificaties

Merk:	Godox
Categorie:	Niet gecategoriseerd
Model:	VL150
Kleur van het product:	Zwart
Gewicht:	1970 g
Illuminance:	61000 Lux
Aantal lampen:	1 gloeilamp(en)
Type lamp:	LED
Aan/uitschakelaar:	Ja
Type stroombron:	AC
Meegeleverde kabels:	AC
Inclusief AC-adapter:	Ja
Levensduur lamp:	- uur
Totaal vermogen:	150 W
Kleurtemperatuur (max):	5800 K
Afstandsbediening inbegrepen:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50/60 Hz
Kleurtemperatuur (min):	5400 K
Aantal afstandsbedieningen:	1 stuk(s)