Godox SZ150R Handleiding

Godox Niet gecategoriseerd SZ150R

Lees hieronder de 📖 handleiding in het Nederlandse voor Godox SZ150R (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

Instruction Manual



705-SZ150R-00

Made in China



: 2

: 0755-29609320(8062) : 0755-25723423 : godox@godox.com

godox.com

Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,

Shenzhen, China Tel: +86-755-29609320(8062) Fax: +86-755-25723423 E-mail: godox@godox.com

GODOX Photo Equipment Co., Ltd.

RGB LED

Zoom RGB LED Video Light

Optional Accessory

The product can be used in combination with the following optional accessories

so as to achieve best photography effects:

RC-R9 Remote control, inverter, softbox, umbrella, light stand, honey comb,

beauty dish, snoot, etc.

Power Supply

Connect the SZ150R to power source with adapter and power cable. Press the

power switch to turn on the LED light.

• Menu Button

Press the MENU button and the LED light will

enter menu interface. In this interface, CH

channel (1 to 32), GR group (A/B/C/D/E/F,0-9),

ID (OFF/01 to 99), DMX function (OFF/001 to

512), Fan (OFF/ON) and Bluetooth can be set.

Operation

1. Setting

• FX Button

1. Press the FX button and the LED light will

enter FX interface. In this interface, you can set

37 different special effects which are divided

into 13 categories according to your demands.

No. Display Situation Display

Slow speed

Flash

Birthday party

Discontinuous

Slow speed

Discontinuous

Firewood

Brief

Strong flash

Medium speed

Press conference

KTV

Frequent

Medium speed

Frequent

Campfire

Continuous

Frequent flash

Quick speed

Paparazzi

Disco

Sustainable

Quick speed

Sustainable

Fire hazard

Show

Quick flash

Display IIIDisplay II

2. In FX mode, turn the FN select dial to choose

the special effect modes from 1 to 13 categories.

And the modes will be selected circularly by

turning the select dial. After choosing the current

mode, press down the FN multifunctional select

dial from and And the modes will display , .

circularly when keeping pressing the FN

multifunctional select dial. Turn the DIM select dial

to choose brightness from 0% to 100% and the

brightness value will be precisely displayed on the

LCD panel.

- 17 - - 18 -

CH32 GR AMENU

CH: 32

ID: 99

DMX:512

GR: A :ON

RESET

Ver:0.3 MAC:DA4C

DIM:75%

CH32 GR A

CH32 GR AMENU

CH: 32

ID: 99

DMX:512

GR: A :ON

RESET

Ver:0.3 MAC:DA4C

DC 36V

DC 36 V

DC 36V

HSI

CCT

UPDATE

• HSI Button

Press HSI button and the LED light will enter

HSI interface.

1. Short press FN button, choose H and turn

the FN select dial to adjust H hue from

0° to 360°. Quickly change the parameters by

turning the select dial faster.

2. Short press FN button, choose S and turn

the FN select dial to adjust S saturation from

0 to 100. Quickly change the parameters by

turning the select dial faster.

3. Turn the DIM select dial to adjust light

brightness from 0% to 100%. Short press

the DIM select dial once to turn off the

brightness. Press the button again to recover

the brightness set before.

• CCT Button

Press the CCT button to enter color

temperature setting interface.

• Zooming Knob

By adjusting this knob, the beam angle

can be changed from 20° to 65°.

• USB Upgrade Port

1. Download the new firmware into U disk from

official website

http://www.godox.com.cn/Downloads.html.

2. Turn off the LED light. Insert the U disk with

new firmware into the USB upgrade port.

3. Turn on the LED light, and it will

automatically enter the upgrading interface.

4. The LED light will automatically back to the

main interface.

Note: 1. The newest firmware must be downloaded from the official website

and stored in the root directory of U disk. And there can only be one BIN

document.

2. The USB port can only support firmware upgrade function.

- 19 - - 20 -

DIM:75%

CHCH 32

3232 GR

GRGR A

AA HSI

H:360°

S:100%

0 180 360° ° °

0 1000

DIM:75%

G/M:-50 0 50-50

2800K 2800 6500

CHCH 32

3232 GR

GRGR A

AA CCT

1. Short press the FN button to select the color

temperature. Then, turn the FN select dial to

adjust color temperature from 2800K to 6500K.

2. Short press the FN button to select G/M.

Then, turn the FN select dial to adjust hue from

-50 to 50.

• Silent Mode

Press the Menu button to enter the MENU

interface. Turn the FN select dial to choose

icon. Then, turn the DIM select dial, choose

ON to boot the fan. When choosing OFF, will

be displayed and the fan will be turned off to

achieve silent mode.

CH32 GR AMENU

CH: 32

ID: 99

DMX:512

GR: A :OFF

RESET

Ver:0.3 MAC:DA4C

DC 36V

Product specificaties

Merk:	Godox
Categorie:	Niet gecategoriseerd
Model:	SZ150R
Kleur van het product:	Zwart
Gewicht:	2650 g
Breedte:	160 mm
Diepte:	200 mm
Illuminance:	26000 Lux
Aantal lampen:	1 gloeilamp(en)
Type lamp:	LED
Hoogte (min):	330 mm
Meegeleverde kabels:	AV
Aantal:	1
Levensduur lamp:	- uur
Kleur licht:	Variabel
Totaal vermogen:	150 W
Color Rendering Index (CRI):	97
Stralingshoek:	65 °
Instelbare kleurtemperatuur:	Ja
Kleurtemperatuur (max):	6500 K
AC-ingangsspanning:	230 V
AC-ingangsfrequentie:	50/60 Hz
Kleurtemperatuur (min):	2800 K
Energieverbruik per 1000 uur:	- kWu
Reflector inclusief:	Ja