Godox ML-SK300II Handleiding

Godox Lamp ML-SK300II

Lees hieronder de 📖 handleiding in het Nederlandse voor Godox ML-SK300II (6 pagina's) in de categorie Lamp. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Compact Studio Flash

705-SK2000-00 Made In China 说明手册

Instruction Manual

中英文双语

Chinese English Bilingual

影室闪光灯

地址/ 深圳市宝安区福海街道塘尾社区耀川工业区厂房栋层至层、栋层至层Add: 2 1 4 4 1 4

1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone,

Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China

电话/Tel: +86-755-29609320(8062) Fax: +86-755-25723423 传真/

邮箱/ E-mail: godox@godox.com http://www.godox.com

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

FOREWORD

Thanks for choosing SKII series studio flash. It is a lightweight, compact and

durable flash with complete functions. Design for shooting studio portrait and

e-commerce product. This product is suitable for head shot, waist shoot, and

certificate photography, as well as product shooting, etc. It can also offer high

light, background light, or hair light in large studios and workshops. The SKII

flash offers:

CONTENTS

14 • Slave Trigger Model

15 • Buzz Function

15 • Key Combination

15 • Alarm Display

15 • Memory Function

15 • Wireless Control Function

17 • Tube Replacement

17 Technical Data

18 Maintenance

Built-in Godox 2.4G wireless X system

Precise output displayed on LCD panel, 40 steps from 1/16 to 1/1 (or 6.0 to 10.0)

Use optional X1, XT16 or FT-16 trigger to control the flash power ratio, modeling

lamp and buzzer, as well as flash triggering

Compact and lightweight body with Bowens mount to add almost any studio light

shapers

150W modeling lamp adjusts in 5% to 100% power levels

Outstanding output stability, no more than 2% shifts when under the same output

Anti-preflash function enables synchronization with cameras that have a one-

preflash firing system

Auto memory and recovery of adjusted panel settings

09 Foreword

10 Warning

Caution10

Names of Parts11

11 • Body

12 • LCD Panel

12 • Accessories

12 • Separately Sold Accessories

13 Operations

13 • Flash Preparation

13 • Power Connection

13 • Modeling Lamp

14 • Power Output Control

14 • Test Button

14 • Sync Triggering

14 • GR/CH Button

To prevent damage to the product or injury to you or to others, read the

following warnings in their entirety before using this product. Keep these

safety instructions where users can read them for ready reference.

Do not disassemble or modify. Should the product break down, send the

defective back to the authorized service center for inspection and maintenance.

Keep dry. Do not handle with wet hands, immerse in water, or expose to rain.

Keep out of reach of children.

Please put the device in a ventilation environment and keep the parts of lighting

and heat dissipation holes are unobstructed. Do not use in flammable

environment.

As this product adopts make and break device, please keep it easy to be used.

No touching the heating parts of this product.

Please turn off the power and wear insulated gloves before installing and

connecting accessories. When replacing the tube or modeling lamp, please

make sure that the tube is cool and wear insulated gloves to prevent burns.

Do not flash directly towards naked eyes (especially those of babies), otherwise

it may lead to visual impairment.

Disconnect from the power supply when it will not be used for an extended

period.

For continued protection against risk of fire replace only with same Type F8AL

250V fuse.

An apparatus with CLASS I construction shall be connected to a MAINS socket

outlet with a protective earthing connection.

The MAINS plug or an appliance coupler is used as the disconnect device, the

disconnect device shall remain readily operable.

After 30 continuous flashes at full power, the flash should be cooled down for

about 3 minutes. Overheating will occur if it is used continuously without cooling

down.

Do not keep using the modeling lamp for a long time; otherwise flammable

accessories attaching to flash head, e.g. softbox will get burnt. A 10-minute time

is recommended in this case. After 10 minutes, cool it down for 1 minute.

When using a snoot, do not keep the modeling lamp on for a long time or fire too

frequently (not over six times for one minute). Overheating will result in damages

for strobe housing and/or studio light.

Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.

The apparatus shall not be exposed to tripping or splashing and that no objects

filled with liquids, such as vases, shall be placed on the apparatus.

Do not touch the area around this symbol since it is hot.

Warning

- 09 - - 10 -

FUSE:5A

AC220V-240V~50Hz

Body

NAMES OF PARTS

1. AC Power Socket

2. Sync Cord Jack

3. Power Switch

4. Test Button

5. MOD/OFF Modeling Lamp Button

6. S1/S2 Slave Model Button

7. Group/Channel Button

8. BUZZ Button

9. Wireless Control Port

10. LCD Display

11. Light Sensor

12. Modeling Lamp Indicator

13. Test Indicator

14. Select Dial + SET Button

15. Fuse

16. Mounting Bracket

17. Umbrella Input

18. Direction Adjusting Handle

Separately sold accessories

The product can be used in combination with the following accessories sold

separately, so as to achieve best photography effects: X1, XT16 or FT-16 remote

control, Power Inverter, Softbox, Photographic Umbrella, Light Stand, Barndoor,

Snoot, etc.

1. Built-in 2.4G Wireless

Transmission

2. Built-in Wireless Channel

3. Built-in Wireless Channel Dial

4. Slave Model Indicator

5. Beep

6. Temperature Alarm Display

7. Built-in Wireless Group

8. Flash Output

9. Modeling Lamp is off

10. Modeling Lamp is in the PROP

mode

11. Modeling Lamp shows the power

in percentage

12. Modeling Lamp is off when

triggering the flash

LCD Panel

1. Power Cord

2. Lamp Cover

3. Modeling Lamp

4. Instruction Manual

Accessories

OFF PROP

- 11 - - 12 -

Product specificaties

Merk:	Godox
Categorie:	Lamp
Model:	ML-SK300II

Heb je hulp nodig?

Als je hulp nodig hebt met Godox ML-SK300II stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Lamp Godox

Godox Knowled F100R Handleiding

4 December 2024

Godox M600Bi Pro Handleiding

4 December 2024

Godox P260C Pro Handleiding

5 Augustus 2024

Godox ML100Bi Handleiding

9 Juni 2024

Godox M600R Handleiding

7 Mei 2024

Godox P300R Handleiding

7 April 2024

Godox P600R Hard Handleiding

7 April 2024

Godox TP4R Handleiding

19 Maart 2024

Godox LDP18Bi Handleiding

11 November 2023

Godox LDX50R Handleiding

11 November 2023

Handleiding Lamp

Nieuwste handleidingen voor Lamp

Chauvet WELL POD 2X6 Handleiding

17 December 2024

Makita MT001 Handleiding

16 December 2024

Ledlenser ML6 Handleiding

16 December 2024

Ledlenser ML4 Handleiding

16 December 2024

Ledlenser H5R Work Handleiding

16 December 2024

Ledlenser H3.2 Handleiding

16 December 2024

Ledlenser MH5 Handleiding

16 December 2024

Ledlenser MH4 Handleiding

16 December 2024

Ledlenser H7R Work Handleiding

16 December 2024

Ledlenser H7R Core Handleiding

16 December 2024