Godox Knowled F800R Handleiding

Godox Verlichting Knowled F800R

Lees hieronder de 📖 handleiding in het Nederlandse voor Godox Knowled F800R (10 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/10
User Instructions
Rev. 3/14
©2013 ADJ Products, LLC all rights reserved. Information,
specications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their
respective companies.
ADJ Products, LLC and all aliated companies hereby dis-
claim any and all liabilities for property, equipment, building,
and electrical damages, injuries to any persons, and direct or
indirect economic loss associated with the use or reliance of
any information contained within this document, and/or as a
result of the improper, unsafe, unsucient and negligent as-
sembly, installation, rigging, and operation of this product.
INNO SPOT PRO
Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn o all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!
ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 3ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 2
• DMX-512 Protocol Compatible (14 DMX Channels)
• 8 Colors + White
• 6 Rotating, Replaceable Gobos + Spot
• 3 Operating Modes - Sound Active, Show Mode, & DMX Control
• Power Cord Daisy Chain - See page 20 for more info
• Internal Microphone
• Digital Display for Address and Function Setting
• UC3 Controller (Not Included)
• 4 Preprogrammed Shows
Inno Spot Pro Features
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact ADJ Products, LLC.
During operation the housing may become extremely hot. Avoid
touching the unit with bare hands while in use.
ADJ Products, LLC will not accept any liability for any resulting dam-
ages caused by the non-observance of this manual or any unauthor-
ized modication to this unit.
Inno Spot Pro Handling Precautions
Inno Spot Pro Warranty Registration
The Inno Spot Pro 2 year (730 days) limited warranty. Please carries a
fill out the enclosed warranty card to validate your purchase and war-
ranty. You may also register your product online at www. adjproducts.
com. All returned service items whether under warranty or not, must
be freight pre-paid and accompany a return authorization (R.A.) um-n
ber. If the unit is under warranty you must provide a copy of your
proof of purchase invoice. Please contact ADJ Products, LLC cus-
tomer support for a R.A. number.
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Inno Spot Pro General Instructions
Inno Spot Pro General Information
Unpacking: Thank you for purchasing the Inno Spot Pro by ADJ
Products, LLC. Every Inno Spot Pro has been thoroughly tested and
has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your xture for
any damage and be sure all equipment necessary to operate the unit
has arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return this unit to your dealer without
contacting customer support rst.
Introduction: The Inno Spot Pro is a 14 channel, DMX intelligent,
moving head, LED fixture. The Inno Spot Pro can operate as a stand
alone fixture or in a Master/Slave configuration. The Inno Spot Pro has
three operating modes; a sound active, show mode, DMX controlled.
This fixture is suitable for theaters, studios, retail stores, and other
similar locations. For best results use fog or special effects smoke to
enhance the beams projections.
Customer Support: ADJ Products, LLC provides a toll free cus-
tomer support line, to provide help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.adj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@adj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Warning! This may cause severe eye damage. Avoid looking directly
into the light source at all times!
For Your Own Personal Safety, Please Read and Understand This
Manual Completely Before You Attempt To Install Or Operate
This Unit!
• To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required volt-
age for your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken.
• Do not attempt to remove or break o the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and re in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Never operate this unit when it’s cover is removed.
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience recep-
tacles, and the point where they exit from the appliance.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 25 for cleaning details.
• Heat -This fixture should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. Objects have fallen, or liquid has been spilled into the appliance.
B. The appliance has been exposed to rain or water.
C. The appliance does not appear to operate normally or exhibits
a marked change in performance.
Inno Spot Pro Safety Precautions
ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 5ADJ Products, LLC - www.adj.com - Inno Spot ProInstruction Manual Page 4
The Inno Spot Pro is fully operational in two dierent mounting posi-
tions, hanging upside-down from a ceiling or set on a at level sur-
face. To avoid internal damage to the unit, never mount the unit on
its side as illustrated above. Be sure this xture is kept at least 0.5m
away from any ammable materials (decoration etc.). Always use
and install the supplied safety cable as a safety measure to prevent
accidental damage and/or injury in the event the clamp fails (see next
page). Never use the carrying handles for secondary attachment.
When installing the unit, the trussing or area of installation must be
able to hold 10 times the weight without any deformation. When
installing the unit must be secured with a secondary safety attach-
ment, e.g. and appropriate safety cable. Never stand directly below
the unit when mounting, removing, or servicing the unit.
Overhead mounting requires extensive experience, including calculat-
ing working load limits, installation material being used, and perodic
safety inspection of all installation material and unit. If you lack these
qualications, do not attempt the installation yourself.
These installaiton should be checked by a skilled person once a year.
Inno Spot Pro Installation

Product specificaties

Merk: Godox
Categorie: Verlichting
Model: Knowled F800R

Heb je hulp nodig?

Als je hulp nodig hebt met Godox Knowled F800R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting Godox

Godox

Godox Knowled F800R Handleiding

27 Januari 2025
Godox

Godox P600Bi Handleiding

4 September 2023
Godox

Godox TP8R Handleiding

8 Mei 2023
Godox

Godox MG1200Bi Handleiding

19 April 2023
Godox

Godox R1 Handleiding

3 April 2023
Godox

Godox LD150R Handleiding

13 Februari 2023
Godox

Godox LD75R Handleiding

23 Januari 2023
Godox

Godox LD150RS Handleiding

12 Oktober 2022

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Rotolight

Rotolight Ultimate VLogging Kit Handleiding

9 Maart 2025
Rotolight

Rotolight Aeos Location Handleiding

9 Maart 2025
SLV

SLV Sitra Cube 232537 Handleiding

25 Februari 2025
SLV

SLV Enola 149388 Handleiding

25 Februari 2025
SLV

SLV Out 114471 Handleiding

25 Februari 2025
SLV

SLV Bulan Grid 229081 Handleiding

25 Februari 2025
SLV

SLV Puri 153561 Handleiding

25 Februari 2025
SLV

SLV Pema 230030 Handleiding

25 Februari 2025
Ryobi

Ryobi RLA4 Handleiding

25 Februari 2025
Ryobi

Ryobi One+ RSL18 Handleiding

25 Februari 2025