Glyph GT062E Handleiding

Glyph Externe harde schijf GT062E

Lees hieronder de 📖 handleiding in het Nederlandse voor Glyph GT062E (17 pagina's) in de categorie Externe harde schijf. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/17

GT 062E™ Manual

Tabletop FireWire 800, USB 2.0 and eSATA enclosure

with RAID 1, RAID 0 and Spanning modes

610030-1.08 GT 062E Manual.pdf

August 23, 2011

Proprietary Notice and Disclaimer

Unless noted otherwise, this document and the information herein disclosed are proprietary to Glyph Technologies, 3736 Kellogg

Road, Cortland NY 13045 (“GLYPH”). Any person or entity to whom this document is furnished or having possession thereof, by

acceptance, assumes custody thereof and agrees that the document is given in condence and will not be copied or reproduced

in whole or in part, nor used or revealed to any person in any manner except to meet the purposes for which it was delivered.

Additional rights and obligations regarding this document and its contents may be dened by a separate written agreement with

GLYPH, and if so, such separate written agreement shall be controlling.

The information in this document is subject to change without notice, and should not be construed as a commitment by GLYPH.

Although GLYPH will make every eort to inform users of substantive errors, GLYPH disclaims all liability for any loss or damage

resulting from the use of this manual or any software described herein, including without limitation contingent, special, or inci-

dental liability.

logo are registered trademarks of Glyph Technologies. All other brands and product names mentioned are trademarks of their

respective holders.

Contacting Glyph

Please use the following contact information to contact Glyph and its distributors.

Glyph USA oers phone support Monday through Friday, 8:00 am to 5:00 PM Eastern Time.

Note: DO NOT ship any return goods to the mailing addresses below unless you have a valid RMA number.

All goods will be refused delivery unless a valid RMA number is displayed on the outside of the package.

United States of America

Glyph Technologies

3736 Kellogg Rd.

Cortland, NY 13045

USA

Phone: +1 607-275-0345

Fax: +1 607-275-9464

www.glyphtech.com

Sales Contact

sales@glyphtech.com

Technical Support:

tech@glyphtech.com

Unpacking Your GT 062E

Your Glyph GT 062E and accessories are packaged in a sturdy shipping container. Please inspect the con-

tainer for evidence of shipping damage and mishandling. If the container is damaged, le a report with the

carrier or dealer immediately. Do not attempt to unpack and operate your GT 062E until the carrier or dealer

conrms the damage. If the container is in good condition, proceed with unpacking the GT 062E. Verify

that all of the items described in the next section are present and in good condition. If any of the items you

expect to nd in your container is missing or damaged, contact the dealer before proceeding any further.

In any case, do keep the shipping container and all packing materials in a safe place.

The GT 062E package includes:

GT 062E External Hard Drive

Glyph Manager software installer CD

9-Pin FireWire 800 Cable

USB 2.0 Cable (A to Mini-B)

IEC Power Cable

About the GT 062E and Drive Modes

The GT 062E enclosure contains two hard disk drives, which function as one single volume. Through the use

of the Glyph Manager software utility, it supports three drive modes: RAID 1 (mirroring), RAID 0 (striping),

and Spanning. Each drive mode has its own advantages, depending upon the application.

RAID 1 (mirroring) oers data redundancy and real-time backup by writing the same data to the

two hard drives at the same time. Should a drive failure happen, data is still available on the remain-

ing drive. In RAID 1 mode, the two drives are seen by the computer as one volume, but with half the

capacity. For example, a 1TB GT 062E will be seen as a 500GB drive. Reading and writing occurs on

both drives simultaneously so that each of the drives contains exactly the same data, mirroring each

other. If either of the drives should fail the other is there to seamlessly continue to provide operation.

RAID 0 (striping) increases the performance of the drive system by spreading the data across two

drives. RAID 0 is a proven technology for editing video, working with huge graphics les, sound

libraries, and streaming instruments that play hundreds of samples simultaneously. RAID 0 is the de-

fault shipping drive mode. In RAID 0 (striping) mode, the two drives are seen by the computer as one

large drive, and reading and writing occurs on both drives simultaneously. It is designed to increase

the performance and data throughput of the drive system. The GT 062E’s built-in RAID controller

splits each piece of data across both of the drives in segments and distributes the I/O burden. Since

data is written without any form of parity data-checking, it allows for the fastest data transfer of all

other RAID levels. However, if one drive becomes damaged, the data on both drives can become cor-

rupted. RAID 0 is not redundant or fault tolerant like RAID levels 1, 3, and 5, but the trade o is that

it’s the fastest of all RAID levels. MAKE SURE TO BACKUP YOUR DATA OFTEN!

In , the two drives are seen as one large drive and data is written sequentially across Spanning mode

them. When the rst drive lls to the limit, data is then written to the second drive. This mode is use-

ful for applications requiring large volumes, but not requiring the speed of RAID 0. Spanning does

not provide any performance or redundancy benets.

Using the GT 062E with Pro Tools® Software

The 3TB and 4TB GT 062E models only support Pro Tools® when they are congured in RAID 1 mode. This is

because RAID 1 shows to the operating system as half the total capacity (1.5TB for the 3TB, and 2TB for the

4TB). Currently, Pro Tools is limited to volumes that are 2TB or less in size. If you attempt to record or play-

back from any locations on the disk above 2TB, Pro Tools will give errors. If you set your GT 062E to Spanning

or RAID 0 mode, it will work until it is lled to 2TB, then it will give errors. This is currently an open issue that

we expect will be resolved in future releases of Pro Tools.

Product specificaties

Merk:	Glyph
Categorie:	Externe harde schijf
Model:	GT062E
Kleur van het product:	Zwart, zilver
Gewicht:	2700 g
Breedte:	241 mm
Diepte:	218 mm
Hoogte:	43 mm
Gewicht verpakking:	5000 g
Breedte verpakking:	381 mm
Diepte verpakking:	333 mm
Hoogte verpakking:	108 mm
Soort:	HDD
AC-adapterfrequentie:	50 - 60 Hz
AC-adapter ingangsspanning:	100-240 V
Aan/uitschakelaar:	Ja
Connectiviteitstechnologie:	Bedraad
Meegeleverde kabels:	FireWire, USB
Vingerafdruklezer:	Nee
Garantiekaart:	Ja
USB-versie:	2.0
Externe adapter:	Ja
Ondersteunt Linux:	Ja
USB-connector:	USB
HDD capaciteit:	4000 GB
HDD rotatiesnelheid:	7200 RPM
Maximale overdrachtssnelheid van gegevens:	3000 Mbit/s
RAID support:	Ja
HDD omvang:	- "
Soorten RAID:	0, 1
Stroomverbruik (typisch):	54 W
eSATA:	Ja
Buffergrootte opslagstation:	64 MB
Busgevoed:	Nee
Gemiddelde zoektijd harde schijf:	8 ms
FireWire 800:	Ja