Gira DALI 2030 00 Handleiding

Gira Verlichting DALI 2030 00

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Gira DALI 2030 00 (14 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14
Wireless DALI control unit, 1-gang Mini
Wireless DALI control unit, 1-gang Mini
Wireless DALI control unit, 1-gang Mini
Wireless DALI control unit, 1-gang Mini
Wireless DALI control unit, 1-gang MiniWireless DALI control unit, 1-gang Mini
Order no.: 5422 00
Operating instructions
Operating instructions
Operating instructions
Operating instructionsOperating instructions
1
1
1
11 Safety instructions
Safety instructions
Safety instructions
Safety instructionsSafety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. InDanger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
device and or load.
device and or load.
device and or load.device and or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.Danger of electric shock. Device is not suitable for disconnection from supply voltage.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.
Further information about this device can be found in the operation manual on our web-
site.
2
2
2
22 Device components
Device components
Device components
Device componentsDevice components
Figure๎˜ฎ1: Front view
(1) Operating mode switch
(2) Button Prog
Prog
Prog
ProgProg
(3) Status LED
(4) Measuring points for voltage measurement, terminals rear-mounted
3
3
3
33 Intended use
Intended use
Intended use
Intended useIntended use
โ€“ Switching and brightness setting of DALI luminaires
โ€“ Operation with suitable radio transmitters
โ€“ Mounting in appliance box according to DIN 49073 in combination with a suitable cover
โ€“ Installation in surface-mounted housing or panel-mounted housing (accessories) for sus-
pended ceilings
Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
โ€“ Joint operation of all the connected DALI ballasts, broadcast.
1 / 14
32580922 10864978 22.08.2019
Wireless DALI control unit, 1-gang Mini
โ€“ Electronic short-circuit protection of the DALI supply with permanent switch-off after 8
seconds
โ€“ Electronic over-temperature protection of the DALI supply with self-retain
โ€“ DALI supply for a maximum of 12 subscribers
โ€“ Parallel switching of up to 6 DALI control units with the option of supplying up to 72 DALI
subscribers
โ€“ Switch-on brightness can be saved permanently
โ€“ Minimum brightness can be saved permanently
โ€“ Scene operation possible
โ€“ Status indication with LED
โ€“ Status feedback to radio transmitter
โ€“ DALI ballast is switchable with Prog
Prog
Prog
ProgProg button
Can be set with eNet server:
โ€“ Maximum brightness
โ€“ Dimming speed
โ€“ Switch-on delay / switch-off delay
โ€“ Dim up/dim down ramp
โ€“ Switch-off warning
โ€“ Operation locks
โ€“ Continuous on, Continuous off
โ€“ Hotel function
โ€“ Run-on time
โ€“ Light control
When operating with the eNet Server, operation and signalling could vary from what is de-
scribed here.
Supplementary functions with eNet Server:
โ€“ Fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
โ€“ Update of the device software
โ€“ Repeater function
โ€“ Reading of error memory
Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
โ€“ Joint operation of all the connected DALI ballasts, broadcast.
โ€“ Electronic short-circuit protection of the DALI supply with permanent switch-off after 8
seconds
โ€“ Electronic over-temperature protection of the DALI supply with self-retain
โ€“ DALI supply for a maximum of 12 subscribers
โ€“ Parallel switching of up to 6 DALI control units with the option of supplying up to 72 DALI
subscribers
โ€“ Switch-on brightness can be saved permanently
โ€“ Minimum brightness can be saved permanently
โ€“ Scene operation possible
โ€“ Status indication with LED
โ€“ Status feedback to radio transmitter
โ€“ DALI ballast is switchable with Prog
Prog
Prog
ProgProg button
Can be set with eNet server:
โ€“ Maximum brightness
โ€“ Dimming speed
โ€“ Switch-on delay / switch-off delay
โ€“ Dim up/dim down ramp
2 / 14
32580922 10864978 22.08.2019
Wireless DALI control unit, 1-gang Mini
โ€“ Switch-off warning
โ€“ Operation locks
โ€“ Continuous on, Continuous off
โ€“ Hotel function
โ€“ Run-on time
โ€“ Light control
When operating with the eNet Server, operation and signalling could vary from what is de-
scribed here.
The parameter list is in the Internet in the documentation for this device.
Supplementary functions with eNet Server:
โ€“ Fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0
โ€“ Update of the device software
โ€“ Repeater function
โ€“ Reading of error memory
Behaviour after mains voltage failure and return
Behaviour after mains voltage failure and return
Behaviour after mains voltage failure and return
Behaviour after mains voltage failure and returnBehaviour after mains voltage failure and return
The response after mains voltage return can be configured with the eNet server. Default setting:
The light is switched off after mains voltage return. After a brief voltage failure or in the case of
operation on several conductors, it might take a few seconds until the light is switched off.
Within this time frame, a value stored in the DALI ballast โ€“ PowerON-Level โ€“ is retrieved.
The brightness of the lighting when DALI- telegrams are missing โ€“ PowerON-Level โ€“ and
in case of DALI system voltage failure โ€“ SystemFailure-Level โ€“ is stored in the DALI bal-
last and cannot be changed using the actuator.
4
4
4
44 Operation
Operation
Operation
OperationOperation
Operation with radio transmitter
Operation with radio transmitter
Operation with radio transmitter
Operation with radio transmitterOperation with radio transmitter
Operation is with radio transmitters, please observe the radio transmitter instructions.
Operation always applies to all the connected DALI ballasts, broadcast.
5
5
5
55 Information for electrically skilled persons
Information for electrically skilled persons
Information for electrically skilled persons
Information for electrically skilled personsInformation for electrically skilled persons
5.1
5.1
5.1
5.15.1 Fitting and electrical connection
Fitting and electrical connection
Fitting and electrical connection
Fitting and electrical connectionFitting and electrical connection
DANGER!
Electrical shock when live parts are touched.
Electrical shock when live parts are touched.
Electrical shock when live parts are touched.
Electrical shock when live parts are touched.Electrical shock when live parts are touched.
Electrical shocks can be fatal.
Electrical shocks can be fatal.
Electrical shocks can be fatal.
Electrical shocks can be fatal.Electrical shocks can be fatal.
Before carrying out work on the device or load, disengage all the corresponding cir-
Before carrying out work on the device or load, disengage all the corresponding cir-
Before carrying out work on the device or load, disengage all the corresponding cir-
Before carrying out work on the device or load, disengage all the corresponding cir-Before carrying out work on the device or load, disengage all the corresponding cir-
cuit breakers. Cover up live parts in the working environment.
cuit breakers. Cover up live parts in the working environment.
cuit breakers. Cover up live parts in the working environment.
cuit breakers. Cover up live parts in the working environment.cuit breakers. Cover up live parts in the working environment.
Connecting and mounting the control unit.
Connecting and mounting the control unit.
Connecting and mounting the control unit.
Connecting and mounting the control unit.Connecting and mounting the control unit.
To ensure good transmission quality, keep a sufficient distance from any possible sources of in-
terference, e.g. metallic surfaces, microwave ovens, hi-fi and TV systems, ballasts or trans-
formers.
3 / 14
32580922 10864978 22.08.2019


Product specificaties

Merk: Gira
Categorie: Verlichting
Model: DALI 2030 00

Heb je hulp nodig?

Als je hulp nodig hebt met Gira DALI 2030 00 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting Gira

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

EMOS

EMOS D5AB01 Handleiding

2 December 2024
EMOS

EMOS D3EW04 Handleiding

2 December 2024
EMOS

EMOS DCLW09 Handleiding

2 December 2024
EMOS

EMOS D4AA04 Handleiding

2 December 2024
EMOS

EMOS D4FW01 Handleiding

2 December 2024
EMOS

EMOS D5AP01 Handleiding

2 December 2024
EMOS

EMOS D5AW01 Handleiding

2 December 2024
EMOS

EMOS D4AM10 Handleiding

2 December 2024
EMOS

EMOS D4BC02 Handleiding

2 December 2024
EMOS

EMOS D5ZM01 Handleiding

2 December 2024