Gigabyte GA-Z270X-UD3 Handleiding

Gigabyte Moederbord GA-Z270X-UD3

Lees hieronder de 📖 handleiding in het Nederlandse voor Gigabyte GA-Z270X-UD3 (18 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 98 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/18

- 1 -

Table of Contents

Conguring a RAID Set (Intel® Z270/H270 Series) .........................................................2

1-1 Conguring SATA Controllers ............................................................................. 2

1-2 Installing the SATA RAID/AHCI Driver and Operating System.......................... 16

- 2 -

Conguring a RAID Set (Intel® Z270/H270 Series)

To create a RAID set, follow the steps below:

A. Install SATA hard drive(s) in your computer.

B. Congure SATA controller mode in BIOS Setup.

C. Congure a RAID array in RAID BIOS. (Note 1)

D. Install the SATA RAID/AHCI driver and operating system.

Before you begin, please prepare the following items:

•At least two SATA hard drives or SSDs (Note 2) (to ensure optimal performance, it is recommended that you

use two hard drives with identical model and capacity). (Note 3)

•A Windows setup disk.

•Motherboard driver disk.

•A USB thumb drive.

RAID Levels

1-1 Conguring SATA Controllers

A. Installing hard drives

Install the hard drives/SSDs in the Intel® Chipset controlled connectors on the motherboard. Then connect

the power connectors from your power supply to the hard drives.

RAID RAID RAID RAID 0 1 5 10

Minimum

Number of Hard

Drives

≥2 ≥32 4

Array Capacity Number of hard

drives * Size of the

smallest drive

Size of the smallest

drive

(Number of hard

drives -1) * Size of

the smallest drive

(Number of hard

drives/2) * Size of the

smallest drive

Fault Tolerance No Yes Yes Yes

(Note 1) Skip this step if you do not want to create RAID array on the SATA controller.

(Note 2) An M.2 PCIe SSD or an U.2 SSD cannot be used to set up a RAID set either with an M.2 SATA SSD

or a SATA hard drive.

(Note 3) Refer to Chapter 1, "Internal Connectors," for the installation notices for the U.2, M.2, and SATA

connectors.

- 3 -

The BIOS Setup menus described in this section may differ from the exact settings for your motherboard.

The actual BIOS Setup menu options you will see shall depend on the motherboard you have and

the BIOS version.

B. Conguring SATA controller mode in BIOS Setup

Make sure to congure the SATA controller mode correctly in system BIOS Setup.

Step 1:

Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). Go to

Peripherals\SATA And RST Conguration SATA Controller(s), make sure is enabled. To create RAID, set

SATA Mode Selection Intel RST Premium With Intel Optane System Acceleration to (Figure 1).

Step 2:

To use the EZ RAID feature, follow the steps in "C-1." To congure UEFI RAID, follow the steps in "C-2." To

enter the legacy RAID ROM, refer to "C-3" for more information. Finally, save the settings and exit BIOS Setup.

Figure 1

Product specificaties

Merk:	Gigabyte
Categorie:	Moederbord
Model:	GA-Z270X-UD3
Breedte:	225 mm
Diepte:	305 mm
Ethernet LAN:	Ja
Type stroombron:	ATX
Aantal HDMI-poorten:	1
Microfoon, line-in ingang:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Hoofdtelefoonuitgangen:	1
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	6
Processor socket:	LGA 1151 (Socket H4)
Processorfabrikant:	Intel
Maximum intern geheugen:	64 GB
Aantal poorten USB 3.2 Gen 2 (3.1 Gen 2) Type C:	1
Audio-uitgangskanalen:	7.1 kanalen
Ondersteunt Linux:	Ja
Chipset moederbord:	Intel® Z270
Aantal poorten USB 3.2 Gen 2 (3.1 Gen 2) Type A:	1
Geheugen slots type:	DIMM
PCI Express x1 slots:	3
PCI Express x16 slots:	3
Geheugen kanaal:	Dubbelkanaals
Intel® Optane™ Memory Ready:	Ja
PS/2 poort(en):	2
Component voor:	PC
Soorten RAID:	0, 1,5, 10
Aantal SATA III connectors:	6
Non-ECC:	Ja
Compatibele processors:	Intel Celeron, Intel Pentium
Ondersteunde geheugen types:	DDR4-SDRAM
Ondersteunde types opslag-drives:	HDD & SSD
Moederbord chipset familie:	Intel
Moederbord form factor:	ATX
Aantal geheugenslots:	4
Supported memory clock speeds:	2133,2400,2666,2800,3000,3200,3300,3333,3400,3466,3600,3666,3733,3800,3866 MHz
BIOS type:	UEFI AMI
Grootte BIOS-geheugen:	64 Mbit
ACPI version:	5.0
Aansluiting voor CPU koeler:	Ja
Aansluitingen voor behuizingsventilatoren:	3
ATX Power connector (24-pin):	Ja
Voorpaneel-connector:	Ja
USB 2.0 aansluitingen:	2
Aansluiting voor audiopaneel aan voorzijde:	Ja
Niet gebufferd geheugen:	Ja
Parallele port via interne header:	Ja
USB 3.2 Gen 1 (3.1 Gen 1)-aansluitingen:	2
TPM connector:	Ja
S/PDIF uitgang:	Ja
EPS power connector (8-pin):	Ja
Ondersteunde geheugenmodule capaciteiten:	16GB
Clear CMOS jumper:	Ja
Aantal M.2 (M) slots:	1
Thunderbolt-headers:	1
Serial port headers:	1
Seriële port via interne header:	Ja
Aantal SATA Express-poorten:	1