Gigabyte GA-7ZM Handleiding
Gigabyte
Moederbord
GA-7ZM
Lees hieronder de 📖 handleiding in het Nederlandse voor Gigabyte GA-7ZM (72 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/72

FCC Compliance Statement:
This equipment has been tested and found to
comply with limits for a Class B digital device ,
pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable
protection against harmful interference in
residential installations. This equipment
generates, uses, and can radiate radio
frequency energy, and if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause interference to radio or
television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Move the equipment away from the receiver
-Plug the equipment into an outlet on a circuit different from that to which
the receiver is connected
-Consult the dealer or an experienced radio/television technician for
additional suggestions
You are cautioned that any change or modifications to the equipment not
expressly approve by the party responsible for compliance could void Your
authority to operate such equipment.
This device complies with Part 15 of the FCC Rules. Operation is subjected to
the following two conditions 1) this device may not cause harmful interference
and 2) this device must accept any interference received, including interference
that may cause undesired operation.
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2. 1077(a)
Respon sible Party Name: G.B. T. INC.
Address: 18305 Valley Blvd., Suite#A
LA Puent, CA 91744
Phone/Fax No: (818) 854-9338/ (818) 854-9339
hereby d eclares that th e pro duct
Product Name:
Model Number:
Mother B oard
Conforms to the following sp ecifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary I nformation:
This device comp lies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
and (2) this device must accept any inference received, includin g
that may cause undesired operation.
Representative Pers on's Name: ERIC LU
Signature:
Date: Jun. 10, 2000
Eric Lu
GA-7ZM

Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, system, installation to which it refers)
Mother Board
GA-7ZM
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
EN 55011 EN 61000-3-2* Limits and methods of measurement Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-2 by household appliances and similar
industrial, scientific and medical (ISM electrical equipment “Harmonics”
high frequency equipment
EN55013 Limits and methods of measurement EN61000-3-3* Disturbances in supply systems caused
of radio disturbance characteristics of EN60555-3 by household appliances and similar
broadcast receivers and associated electrical equipment “Voltage fluctuations”
equipment
EN 55014 Limits and methods of measurement EN 50081-1 Generic emission standard Part 1:
of radio disturbance characteristics of Residual, commercial and light industry
household electrical appliances,
portable tools and similar electrical EN 50082-1 Generic immunity standard Part 1:
apparatus Residual, commercial and light industry
EN 55015 EN 55081-2 Limits and methods of measurement Generic emission standard Part 2:
of radio disturbance characteristics of Industrial environment
fluorescent lamps and luminaries
EN 55020 EN 55082-2 Immunity from radio interference of Generic immunity standard Part 2:
broadcast receivers and associated Industrial environment
equipment
EN 55022 ENV 55104 Limits and methods of measurement Immunity requirements for household
of radio disturbance characteristics of appliances tools and similar apparatus
information technology equipment
DIN VDE 0855 Cabled distribution systems; Equipment EN 50091- 2 EMC requirements for uninterruptible
part 10 for receiving and/or distribution from power systems (UPS)
part 12 sound and television signals
CE marking (EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
EN 60065 EN 60950 Safety requirements for mains operated Safety for information technology equipment
electronic and related apparatus for including electrical business equipment
household and similar general use
EN 60335 EN 50091-1 Safety of household and similar General and Safety requirements for
electrical appliances uninterruptible power systems (UPS)
Manufacturer/Importer
Signature : Rex Lin
(Stamp) Date : Jun. 10, 2000 Name : Rex Lin

7ZM
AMDTM
Athlon AGP Motherboard
USER'S MANUAL
AMDTM Athlon Socket A Processor Motherboard
REV. 2.2 Third Edition
R-22-03-000721

How This Manual Is Organized
This manual is divided into the following sections:
1) Revision History Manual revision information
2) Item Checklist Product item list
3) Features Product information & specification
4) Hardware Setup Instructions on setting up the motherboard
5) Performance & Block Diagram Product performance & block diagram
6) Suspend to RAM Instructions STR installation
7) BIOS Setup Instructions on setting up the BIOS
software
8) Appendix General reference


Table Of Content
Revision History P.1
Item Checklist P.2
Summary of Features P.3
7ZM Motherboard Layout P.5
Page Index for CPU Speed Setup / Connectors / Panel and Jumper
Definition
P.7
Performance List P.21
Block Diagram P.22
Suspend to RAM Installation P.23
Memory Installation P.29
Page Index for BIOS Setup P.30
Appendix P.59

7ZM Motherboard
1
Revision History
Revision Revision Note Date
2.2 Initial release of the 7ZM motherboard user’s manual. May.2000
2.2 Second release of the 7ZM motherboard user’s manual. Jun.2000
2.2 Third release of the 7ZM motherboard user’s manual. Jul.2000
The author assumes no responsibility for any errors or omissions that may appear in this
document nor does the author make a commitment to update the information contained herein.
Third-party brands and names are the property of their respective owners.
Jul. 21, 2000 Taipei, Taiwan, R.O.C

Item Checklist
2
Item Checklist
The 7ZM motherboard
Cable for IDE / floppy device
Diskettes or CD (TUCD) for motherboard driver & utility
Internal USB Cable (Optional)
Cable for SCSI device
7ZM user’s manual

Summary of Features
4
PS/2 Connector PS/2 Keyboard interface and PS/2 Mouse interface
BIOS Licensed AMI BIOS, 2M bit flash ROM
Additional Features Support Wake-On-LAN (WOL)
Support Internal / External Modem Ring On
Support USB KB/MS Wake up from S3
Includes 3 fan power connectors
Poly fuse for keyboard over-current protection
Support STR (Suspend-To-RAM) function

7ZM Motherboard
5
7ZM Motherboard Layout
7ZM
PCI1
PCI2
Socket A CPU
VT82C
686A
VT8363
GAME & AUDIO
COM B COMA
LPT
PS/2
BIOS
A
TX POWER
J3
J8
J7 J9
BAT1
J2
BZ1
FLOPPY
IDE2
IDE1
AGP 1
JP6
SW1
J11
LED1
J13
J12
J4
JP4
USB
JP8
AMR
PCI3
AD1881
J18
USB2
DIMM1
DIMM2
DIMM3
JP7
JP9 J14
J16
J17
Clock
Generator

7ZM Motherboard Layout
6
Page Index for CPU Speed Setup / Connectors / Panel and Jumper
Definition
Page
CPU Speed Setup P.7
Connectors P.8
Game & Audio Port P.8
COM A / COM B / LPT Port P.8
USB 1 Connector P.9
USB 2 Connector P.9
PS/2 Keyboard & PS/2 Mouse Connector P.10
JP3 (CPU Fan) P.10
JP6 (Power Fan) P.11
J2 (System Fan) P.11
ATX Power P.12
Floppy Port P.12
IDE 1(Primary) / IDE 2(Secondary) Port P.13
J8 (TEL) P.13
J7 (AUX_IN) P.14
J9(CD Audio Line In) P.14
J13 (Ring Power On) P.15
J12 (Wake On LAN) P.15
JP8 / LED1(STR LED Connector & DIMM LED) P.16
J4 (IR) P.16
Panel and Jumper Definition P.17
J2 (2x11 Pins Jumper) P.17
J6 / J15 (AMR Select)[Optional] P.18
JP4 (USB Device Wake Up Selection) P.18
JP7 (STR Function Enabled) P.19
JP9 (Write Protect Function) P.19
BAT1 (Battery) P. 20

7ZM Motherboard
7
CPU Speed Setup
The system bus speed is selectable at 100~133MHz. The user can select the system bus speed
by DIP switch SW1.
If your clock generator ( in Motherboard) is ICS 9248-141. You can follow the below reference.
SW1: (ICS 9248-141) O : ON, X : OFF
FSB 1 3 2 4
95 O O X O
100 X O X X
105 X O O X
110 O X O X
113 X X O O
115 X X X O
117 X X O X
133 X X X X
If your clock generator ( in Motherboard) is ICW W230. You can follow the below reference.
SW1: (ICW W230) O : ON, X : OFF
FSB 1 3 2 4
95 O O X X
100 0 X X X
102 0 0 0 X
104 X X X 0
106 0 X X 0
108 0 0 X 0
110 0 X 0 0
112 0 0 0 0
133 0 X 0 X
AMD CPU Heat Sink Installation:
Beware: Please check that the heat sink is in good contact with the CPU before you turn on your
system.
The poor contact will cause over heat, and might cause damage to your
processor.
9248-141
I
C
S
W230

Connectors
8
Connectors
Game & Audio Port
MIC
GAME Port
Line In
Line Out
COM A / COM B / LPT Port
COM A COM B
LPT PORT

7ZM Motherboard
9
USB 1 Connector
Pin No. Definition
1 USB V0
2 USB D0-
3 USB D0+
4 GND
5 USB V1
6 USB D1-
7 USB D1+
8 GND
1 2 3 4
8
765
USB 2 Connector
Pin No. Definition
1 5V-SB
2 GND
3 USB D2-
4 NC
5 USB D2+
6 USB D3-
7 NC
8 USB D3+
9 GND
10 5V-SB
1
10
9
2

Connectors
10
PS/2 Keyboard & PS/2 Mouse Connector
PS/2
Mouse/Keyboard
Pin No. Definition
1 Data
2 NC
3 GND
4 VCC(+5V)
5 Clock
6 NC
PS/2 Keyboard
PS/2 Mouse
12
34
5
6
J3: CPU Fan
Pin No. Definition
1 Control
2 +12V
3 SENSE
1

7ZM Motherboard
11
JP6: Power Fan
Pin No. Definition
1 Control
2 +12V
3 NC
1
J2: Sysem Fan
Pin No. Definition
1 Control
2 +12V
3 SENSE
1

Connectors
12
ATX Power
Pin No. Definition
3,5,7,13,
15-17 GND
1,2,11 3.3V
4,6,19,20 VCC
10 +12V
12 -12V
18 -5V
8 Power Good
9 5V SB stand by+5V
14 PS-ON(Soft On/Off)
2010
11
1
Floppy Port
Red Line
FDD1

Connectors
16
JP8 / LED1: STR LED Connector & DIMM LED
STR LED Connector External.
+DIMM LED
1
J4: IR
Pin No. Definition
1 VCC (+5V)
2 NC
3 IR Data Input
4 GND
5 IR Date Output
1

7ZM Motherboard
17
Panel and Jumper Definition
J2 : 2x11 Pins Jumper
RE
GN GD
PW
P−P−P+
S P K
HD
1
1
1
1
GN (Green Switch) Open: Normal Operation
Close: Entering Green Mode
GD (Green LED) Pin 1: LED anode(+)
Pin 2: LED cathode(−)
HD (IDE Hard Disk Active LED) Pin 1: LED anode(+)
Pin 2: LED cathode(−)
SPK (Speaker Connector) Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(−)
RE (Reset Switch) Open: Normal Operation
Close: Reset Hardware System
P+P− −P (Power LED) Pin 1: LED anode(+)
Pin 2: LED cathode(−)
Pin 3: LED cathode(−)
PW (Soft Power Connector) Open: Normal Operation
Close: Power On/Off
Product specificaties
Merk: | Gigabyte |
Categorie: | Moederbord |
Model: | GA-7ZM |
Heb je hulp nodig?
Als je hulp nodig hebt met Gigabyte GA-7ZM stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Gigabyte

10 Maart 2025

11 Februari 2025

11 Februari 2025

11 Februari 2025

11 Februari 2025

11 Februari 2025

11 Februari 2025

11 Februari 2025

11 Februari 2025

11 Februari 2025
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord Supermicro
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Advantech
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord

24 Maart 2025

4 Maart 2025

12 Februari 2025

12 Februari 2025

12 Februari 2025

12 Februari 2025

12 Februari 2025

12 Februari 2025

12 Februari 2025

12 Februari 2025