Gigabyte C621 Aorus Xtreme Handleiding

Gigabyte Moederbord C621 Aorus Xtreme

Lees hieronder de 📖 handleiding in het Nederlandse voor Gigabyte C621 Aorus Xtreme (55 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/55

For more product details, please visit GIGABYTE's website.

C621 AORUS XTREME

User's Manual

Rev. 1001

12ME-C621AX-1001R

GIGABYTE will reduce paper use in order to fulll the responsibilities of a global citizen.

Also, to reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

For detailed product information, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"

means the revision of the motherboard is 1.0. Check your motherboard revision before updating

motherboard BIOS, drivers, or when looking for technical information.

Example:

- 2 -

- 3 -

Table of Contents

C621 AORUS XTREME Motherboard Layout .................................................................4

Chapter 1 Hardware Installation .....................................................................................5

1-1 Installation Precautions .................................................................................... 5

1-2 Product Specications ...................................................................................... 6

1-3 Installing the CPU ............................................................................................ 9

1-4 Installing the Memory 10 .....................................................................................

1-5 Installing an Expansion Card ......................................................................... 11

1-6 Setting up AMD CrossFire™/NVIDIA® SLI™ Conguration .............................. 11

1-7 Back Panel Connectors 12 ..................................................................................

1-8 Internal Connectors 14 ........................................................................................

Chapter 2 BIOS Setup 27 ..................................................................................................

2-1 Startup Screen 27 ...............................................................................................

2-2 The Main Menu 28 ..............................................................................................

2-3 M.I.T. .............................................................................................................. 29

2-4 System ........................................................................................................... 36

2-5 BIOS 37 ...............................................................................................................

2-6 Peripherals ..................................................................................................... 40

2-7 Power ............................................................................................................. 43

2-8 Save & Exit ..................................................................................................... 45

Chapter 3 Appendix ......................................................................................................46

3-1 Conguring a RAID Set .................................................................................. 46

3-2 Conguring Intel® Virtual RAID on CPU (Intel® VROC) 47 ..................................

3-3 Drivers Installation 49 ..........................................................................................

3-4 Debug LED Codes ......................................................................................... 50

Regulatory Notices .................................................................................................... 54

Contact Us ................................................................................................................ 55

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keep your hands dry and rst touch a metal object to eliminate static electricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 5 -

I O Controller /iTE® I O Controller C ip/ h

Hardware

Monitor

Volta e detectiong

Temperature detection

Fan speed detection

W g ater coolin ow rate detection

Over eatin warninh g g

Fan fail warning

Fan speed control

* Wh h h ( ) het er t e fan pump speed control function is supported will depend on t e fan

( )pump you install.

BIO S2 256 bit asx M  h

Use of licensed A I EFI BIOM U S

S Support for DualBIO ™

P P 1 M 7 W M SM S 7n .0a, D I 2. , f 2.0, BIO 2. , AC I 5.0P

U qni ue Features S Support for @BIO

S hupport for Q-Flas

S Rupport for GB Fusion

S S Vupport for ystem Information iewer

Bundled

Software Norton® Internet ecurity OE versionS ( M )

Operatin g

System S W 1upport for indows 0 64-bit

Form Factor E-AT Form Factor; 3 .6cm 35.9cmX 8 x

( h h )Go to GIGABYTE's website for t e latest c assis support list

* GIGABYTE reserves t e ri t to ma e any c an es to t e product speci cations and product-related information wit out h gh k h g h  h

prior notice.

Please visit the page on GIGABYTE's website to download the SERVICE/SUPPORT\Utility

latest version of apps.

Please visit GIGABYTE's website for support lists of CPU, memory modules, and SSDs.

- 8 -

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

6ChannelMemoryConguration

This motherboard provides twelve memory sockets and supports 6 Channel Technology. After the memory is

installed, the BIOS will automatically detect the specications and capacity of the memory. The twelve memory

sockets are divided into six channels and each channel has two memory sockets as following:

Channel A: DIMM_P0_A0-1, DIMM_P0_A0-2

Channel B: DIMM_P0_B0-1, DIMM_P0_B0-2

Channel C: DIMM_P0_C0-1, DIMM_P0_C0-2

Channel D: DIMM_P0_D0-2, DIMM_P0_D0-1

Channel E: DIMM_P0_E0-2, DIMM_P0_E0-1

Channel F: DIMM_P0_F0-2, DIMM_P0_F0-1

Note: When installing the memory, make sure to begin with the rst socket of each channel, such as DIMM_P0_

A0-1/DIMM_P0_B0-1/DIMM_P0_C0-1/DIMM_P0_D0-1/DIMM_P0_E0-1/DIMM_P0_F0-1.

Refer to the table below for memory installation according to the number of the memory modules you want to install:

1 Module 2 Modules 4 Modules 6 Modules 8 Modules 12 Modules

DIMM_P0_A0-1 aaaaaa

DIMM_P0_A0-2 rrrraa

DIMM_P0_B0-1 rraaaa

DIMM_P0_B0-2 rrrraa

DIMM_P0_C0-1 rrrara

DIMM_P0_C0-2 rrrrra

DIMM_P0_D0-2 rrrraa

DIMM_P0_D0-1 raaaaa

DIMM_P0_E0-2 rrrraa

DIMM_P0_E0-1 rraaaa

DIMM_P0_F0-2 rrrrra

DIMM_P0_F0-1 rrrara

a r: Installed : Not Installed.

- 10 -

Procedure and driver screen for enabling CrossFire/SLI technology may differ by graphics cards and driver version.

Refer to the manual that came with your graphics cards for more information about enabling CrossFire/SLI technology.

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

• Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

• Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

B. Connecting the Graphics Cards

Step 1:

Observe the steps in "1-5 Installing an Expansion Card" and install CrossFire/SLI graphics cards on the PCI

Express x16 slots. (To set up a 2-Way conguration, we recommend installing the graphics cards on the

PCIEX16_1 and PCIEX16_2 slots.)

Step 2:

Insert the CrossFire (Note 2)/SLI bridge connectors in the CrossFire/SLI gold edge connectors on top of the cards.

Step 3:

Plug the display cable into the graphics card on the PCIEX16_1 slot.

1-6 Setting up AMD CrossFire™/NVIDIA® SLI™Conguration

A. System Requirements

-Windows 10 64-bit operating system

-A CrossFire/SLI-supported motherboard with two or more PCI Express x16 slots and correct driver

-CrossFire/SLI-ready graphics cards of identical brand and chip and correct driver

(For the latest GPUs that support the 4-way/3-way CrossFire/SLI technology, please refer to the AMD/

NVIDIA®

website.) (Note 1)

-CrossFire

(Note 2)/SLI bridge connectors

-A power supply with sufcient power is recommended (Refer to the manual of your graphics cards for the

power requirement)

C.ConguringtheGraphicsCardDriver

C-1. To Enable CrossFire Function

After installing the graphics card driver in the operating system, go to the AMD RADEON SETTINGS screen.

Browse to and ensure is set to .Gaming\Global Settings AMD CrossFire On

C-2. To Enable SLI Function

After installing the graphics card driver in the operating system, go to the NVIDIA Control Panel. Browse to the

CongureSLI,Surround,Physx screen and ensure is enabled.Maximize 3D performance

(Note 1) When using dual core graphics cards, only 2-way is supported.

(Note 2) The bridge connector(s) may be needed or not depending on your graphics cards.

(Note 3) When two or more graphics cards are installed, we recommend that you connect the power cable from the power

supply to the OC_PEG1/OC_PEG2 connector to ensure system stability.

- 11 -

1-7 Back Panel Connectors

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

USB 3.1 Gen 1 Port

The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specication and is compatible to the USB 2.0

specication. Use this port for USB devices.

Center/Subwoofer Speaker Out

Use this audio jack to connect center/subwoofer speakers.

Rear Speaker Out

Use this audio jack to connect rear speakers.

Optical S/PDIF Out Connector

This connector provides digital audio out to an external audio system that supports digital optical audio.

Before using this feature, ensure that your audio system provides an optical digital audio in connector.

Line In/Side Speaker Out

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

Line Out/Front Speaker Out

The line out jack. This jack supports audio amplifying function. For better sound quality, it is recommended

that you connect your headphone/speaker to this jack (actual effects may vary by the device being used).

Mic In/Side Speaker Out

The Mic in jack.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Data transmission or receiving is occurring

On No data transmission or receiving is occurring

- 12 -

1-8 Internal Connectors

Read the following guidelines before connecting external devices:

• First make sure your devices are compliant with the connectors you wish to connect.

• Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

• After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

1ATX_12V_2X4_1~4

2ATX/ATX_1

3OC_PEG_1/2

4CPU_FAN

5SYS_FAN1~4

6SYS_FAN5/6_PUMP

7 CPU_OPT

8 BUZZER

9EC_TEMP1/2

10 D_LED1/2

11 DLED_V_SW1/2

12 LED_C1/C2

13 SATA3 0~7

14 SATA_DOM0/1

15 I_SGPIO1/2

16 U2_32G

17 F_PANEL

18 F_AUDIO

19 SPDIF_O

20 F_USB30_1

21 USB30_OB_1

22 F_USB

23 COMC

24 TPM

25 CLR_CMOS

26 PMBUS

27 VROC

28 BAT

29 PW_SW

30 RST_SW

31 BIOS_SW

32 MBIOS/BBIOS_LED

511115

15221731322465231210 1118

19 25

3029

- 14 -

131

2412

ATX

1/2) ATX_12V_2X4_1~4/ATX/ATX_1 (2x4 12V Power Connectors and 2x12 Main Power Connectors)

With the use of the power connector, the power supply can supply enough stable power to all the components

on the motherboard. Before connecting the power connector, rst make sure the power supply is turned

off and all devices are properly installed. The power connector possesses a foolproof design. Connect the

power supply cable to the power connector in the correct orientation.

The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,

the computer will not start.

To meet expansion requirements, it is recommended that a power supply that can withstand high

power consumption be used. If a power supply is used that does not provide the required power,

the result can lead to an unstable or unbootable system.

ATX/ATX_1:

Pin No. Denition Pin No. Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3 GND GND15

4 +5V 16 PS_ON (soft On/Off)

5 GND GND17

6 GND+5V 18

7 19GND GND

8 Power Good 20 NC

9 5VSB (stand by +5V) 21 +5V

10 +12V +5V22

11 +12V (Only for 2x12-pin ATX) 23 +5V (Only for 2x12-pin ATX)

12 3.3V (Only for 2x12-pin ATX) 24 GND (Only for 2x12-pin ATX)

ATX_12V_2X4_1~4:

Pin No. Denition Pin No. Denition

1 GND (Only for 2x4-pin 12V) +12V (Only for 2x4-pin 12V)5

2 6GND (Only for 2x4-pin 12V) +12V (Only for 2x4-pin 12V)

3 GND 7 +12V

4 GND 8 +12V

ATX_12V_2X4

•When one power supply is used:

ATX Connector (Main) ATX_1 Connector

AT X _ 1 2 V _ 2 X 4 _ 1 an d

ATX_12V_2X4_2 (on the left)

AT X _ 1 2 V _ 2 X 4 _ 3 a n d

ATX_12V_2X4_4 (on the right)

Connect Do Not Connect Connect either one Connect either one

Guidelines for connecting the power supply and power connectors:

This motherboard can be powered by two power supplies. Actual power requirement is dependent on your

hardware conguration. The following table explains how to connect the power supply cables when one or two

power supplies are used.

•When two power supplies are used:

ATX Connector (Main) ATX_1 Connector

AT X _ 1 2 V _ 2 X 4 _ 1 an d

ATX_12V_2X4_2 (on the left)

AT X _ 1 2 V _ 2 X 4 _ 3 an d

ATX_12V_2X4_4 (on the right)

Connect Connect Connect both Connect both

- 15 -

3) OC_PEG_1/OC_PEG_2 (PCIe Power Connectors)

The power connectors provide auxiliary power to the onboard PCI Express p16-x16 slots. When two or more

graphics cards are installed, we recommend that you connect the power cables from the power supply to

the connectors to ensure system stability.

Pin No. Denition

1 +12V

2+12V

3+12V

4 GND

5 GND

6 GND

4/5) CPU_FAN/SYS_FAN1/2/3/4 (Fan Headers)

All fan headers on this motherboard are 4-pin. Most fan headers possess a foolproof insertion design.

When connecting a fan cable, be sure to connect it in the correct orientation (the black connector wire is

the ground wire). The speed control function requires the use of a fan with fan speed control design. For

optimum heat dissipation, it is recommended that a system fan be installed inside the chassis.

CPU_FAN/SYS_FAN4

SYS_FAN1/SYS_FAN2

Pin No. Denition

1GND

2Voltage Speed Control

3Sense

4PWM Speed Control

6) SYS_FAN5/6_PUMP (System Fan/Water Cooling Pump Headers)

The fan/pump header is 4-pin and possesses a foolproof insertion design. Most fan headers possess a

foolproof insertion design. When connecting a fan cable, be sure to connect it in the correct orientation (the

black connector wire is the ground wire). The speed control function requires the use of a fan with fan speed

control design. For optimum heat dissipation, it is recommended that a system fan be installed inside the

chassis. The header also provides speed control for a water cooling pump, refer to Chapter 2, "BIOS Setup,"

"M.I.T.," for more information.

Pin No. Denition

1GND

2Voltage Speed Control

3Sense

4PWM Speed Control

SYS_FAN3

SYS_FAN6_PUMP

SYS_FAN5_PUMP

•Be sure to connect fan cables to the fan headers to prevent your CPU and system from

overheating. Overheating may result in damage to the CPU or the system may hang.

•These fan headers are not conguration jumper blocks. Do not place a jumper cap on the headers.

- 16 -

Product specificaties

Merk:	Gigabyte
Categorie:	Moederbord
Model:	C621 Aorus Xtreme
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	4
Aantal Ethernet LAN (RJ-45)-poorten:	2
Digitale audio, optische uitgang:	1
Meegeleverde software:	Norton Internet Security (OEM)
Ondersteunt Windows:	Windows 10 x64
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	2
Processor socket:	LGA 3647 (Socket P)
Processorfabrikant:	Intel
Maximum intern geheugen:	192 GB
Audio-uitgangskanalen:	7.1 kanalen
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® C621
Geheugen slots type:	DIMM
Audiochip:	Realtek ALC1220-VB
PCI Express x16 slots:	4
S/PDIF-uitgang:	Ja
Ondersteunde opslagstationinterfaces:	SATA III
PS/2 poort(en):	1
Component voor:	PC
Soorten RAID:	0, 1,5, 10
Aantal SATA III connectors:	8
Compatibele processors:	Intel® Xeon® W
Ondersteunde geheugen types:	DDR4-SDRAM
Max. aantal SMP-processoren:	1
Wifi:	Nee
Moederbord chipset familie:	Intel
Moederbord form factor:	Verlengd ATX
Aantal geheugenslots:	12
Supported memory clock speeds:	2133,2400,2666,2800,2933,3000,3200,3400,3466,3600,3733,3800,4000,4200 MHz
BIOS type:	UEFI AMI
Grootte BIOS-geheugen:	256 Mbit
ACPI version:	5.0
Systeem Management BIOS (SMBIOS) versie:	2.7
Ondersteuning voor parallel processing:	2-Way CrossFireX, 2-Way SLI, 3-Way CrossFireX, 3-Way SLI, 4-Way CrossFireX, 4-Way SLI, Quad-GPU CrossFireX, Quad-GPU SLI
Aansluiting voor CPU koeler:	Ja
Aansluitingen voor behuizingsventilatoren:	4
ATX Power connector (24-pin):	Ja
Voorpaneel-connector:	Ja
USB 2.0 aansluitingen:	1
Aansluiting voor audiopaneel aan voorzijde:	Ja
PC gezondheids monitor:	FAN, Temperature, Voltage
Niet gebufferd geheugen:	Ja
USB 3.2 Gen 1 (3.1 Gen 1)-aansluitingen:	1
TPM connector:	Ja
S/PDIF uitgang:	Ja
Clear CMOS jumper:	Ja
12V vermogen-connector:	Ja
RGB LED-aansluitrail:	Ja
Serial port headers:	1
Versie Desktop Management Interface (DMI):	2.7