Getac B360 G1 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Getac B360 G1 (106 pagina's) in de categorie Laptop. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/106
Rugged Mobile Computing Solutions
B360
USER MANUAL
September 22 20
TRADEMARKS
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc.
All brand and product names are trademarks or registered trademarks of
their respective companies.
NOTE
The information in this manual is subject to change without notice.
For the latest version of the manual, please visit the Getac website at
www.getac.com.
i
Table of Contents
Chapter 1 Getting Started ................................................................. 1
Getting the Computer Running ................................................ 2
Unpacking .............................................................................. 2
Connecting to AC Power ....................................................... 3
Turning On and Off the Computer ...................................... 4
Taking a Look at the Computer ................................................ 6
Front Components ................................................................. 6
Rear Components .................................................................. 7
Right- ponents Side Com ......................................................... 8
Left- Side Components ......................................................... 10
Top- open Components........................................................ 11
Bottom Components ........................................................... 14
Chapter 2 Operating Your Computer ............................................. 15
Using the Keyboard ................................................................. 16
Typewriter Keys ................................................................... 16
Cursor- Control Keys............................................................. 16
Numeric Keypad................................................................... 17
Function Keys ....................................................................... 18
Fn Key ................................................................................... 18
Hot Keys ............................................................................... 18
Windows Keys ...................................................................... 19
Using the Touchpad ................................................................. 20
Touch Gestures ..................................................................... 21
Configuring the Touchpad .................................................. 21
Using the Touchscreen (Optional) .......................................... 22
Using Multi touch Gestures- ................................................ 23
Using the Tether (Optional) ................................................ 25
Using Network and Wireless Connections ............................. 26
Using the LAN ...................................................................... 26
Using the WLAN................................................................... 26
ii
Using the Bluetooth Feature .............................................. 27
Using the WWAN Feature (Optional) ................................ 28
Using the Optical Disc Drive (Select Models Only) .................. 30
Inserting and Removing a Disc ........................................... 31
Using the Fingerprint Scanner (Optional) .............................. 32
Using the RFID Reader (Optional) ........................................... 33
Using the Barcode Scanner (Optional) ................................... 34
Notes ..................................................................................... 35
Chapter 3 Managing Power ............................................................ 36
AC Adapter ............................................................................... 37
Battery Pack .............................................................................. 38
Charging the Battery Pack .................................................. 38
Initializing the Battery Pack ................................................ 39
Checking the Battery Level ................................................. 39
Battery Low Signals and Actions ........................................ 40
Replacing the Battery Pack ................................................. 41
Power- Saving Tips .................................................................... 43
Chapter 4 Expanding Your Computer ............................................ 44
Connecting Peripheral Devices ............................................... 45
Connecting a USB Device .................................................... 45
Connecting a Device for USB Charging .............................. 46
Connecting a Monitor ......................................................... 47
Connecting a Serial Device .................................................. 48
Connecting an Audio Device .............................................. 49
Using Various Card Readers .................................................... 50
Using Smart Cards ................................................................ 50
Using ExpressCards (Select Models Only) ........................... 51
Using PC Cards (Select Models Only) .................................. 52
Expanding or Replacing ........................................................... 53
Installing the SSD ................................................................. 53
Chapter 5 Using BIOS Setup ............................................................ 54
When and How to Use ............................................................. 55
Menu Descriptions ................................................................... 56
Information Menu ............................................................... 56
Main Menu ........................................................................... 56
Advanced Menu ................................................................... 57
Security Menu ...................................................................... 59
Boot Menu ........................................................................... 60
Exit Menu ............................................................................. 60
iii
Chapter 6 Using Getac Software .................................................... 62
G- Manager ............................................................................... 63
Chapter 7 Care and Maintenance ................................................... 64
Protecting the Computer ......................................................... 65
Using an Anti Virus Strategy- ............................................... 65
Using the Cable Lock ........................................................... 65
Taking Care of the Computer ................................................. 66
Location Guidelines ............................................................. 66
General Guidelines .............................................................. 66
Cleaning Guidelines ............................................................. 67
Battery Pack Guidelines ....................................................... 67
Touchscreen Guidelines ....................................................... 69
When Traveling ........................................................................ 70
Chapter 8 Troubleshooting ............................................................. 71
Preliminary Checklist ................................................................ 72
Solving Common Problems ...................................................... 73
Battery Problems . ................................................................ 73
Bluetooth Problems ............................................................. 73
Display Problems .................................................................. 74
Hardware Device Problems ................................................. 74
Keyboard and Touchpad Problems .................................... 75
LAN Problems ....................................................................... 75
Optical Disc Drive Problems ................................................. 75
Power Management Problems ........................................... 76
Software Problems .............................................................. 77
Sound Problems ................................................................... 77
Startup Problems ................................................................. 77
WLAN Problems ................................................................... 78
Other Problems .................................................................... 79
Resetting the Computer .......................................................... 80
System Recovery....................................................................... 81
Using Windows RE ............................................................... 81
Using Recovery Partition ..................................................... 82
Using the Driver Disc (Optional) ............................................. 83
Appendix A Specifications ................................................................. 84
Appendix B Regulatory Information ................................................. 86
Safety Notices ........................................................................... 87
About the Battery ................................................................ 87
About the AC Adapter ........................................................ 89
iv
Heat Related Concerns ........................................................ 90
North America .......................................................................... 91
USA ....................................................................................... 91
Canada .................................................................................. 94
User Notification of Take-back Service .............................. 95
Europe Marking and Compliance Notices .............................. 96
Statements of Compliance .................................................. 96
Restriction of Hazardous Substances (RoHS) Directive ..... 98
ENERGY STAR ........................................................................... 99
About Battery and External Enclosure Replacement .......... 100
Battery ................................................................................ 100
External Enclosure ............................................................. 100
1
Chapter 1
Getting Started
This chapter first tells you step by step how to get the computer up and
running. Then, you will find a section briefly introducing the external
components of the computer.
2
Getting the Computer Running
Unpacking
After unpacking the shipping carton, you should find these standard items:
B360 notebook computer
AC adapter
AC power cord
Battery pack x 2
Stylus*
Tether*
Document(s) Driver disc*
* Optional
Inspect all the items. If any item is damage or missing, notify your dealer
immediately.
NOTE: Specific models do not have the AC adapter and power cord as
standard items. To purchase the AC adapter kit for your model, contact a
Getac authorized distributor. (Check https://www.getac.com/en/contact/ for
contact information.)
3
Connecting to AC Power
CAUTION: Use only the AC adapter included with your computer. Using
other AC adapters may damage the computer.
NOTE:
The battery pack is shipped to you in power saving mode that protects it
from charging/discharging. It will get out of the mode to be ready for
use when you install the battery pack and connect AC power to the
computer for the very first time.
When the AC adapter is connected, it also charges the battery pack. For
information on using battery power, see Chapter 3.
You must use AC power when start up the for the very first ing computer
time.
1. Plug the DC cord of the AC adapter to the power connector of the
computer ().
2. Plug the female end of the AC power cord to the AC adapter and the
male end to an electrical outlet ().
3. Power is being supplied from the electrical outlet to the AC adapter and
onto your . Now, you are ready to turn on thecomputer . computer
4
Turning O O n and ff the Computer
Turning On
1. Open the top cover pushing the cover by latch () and lifting up the
cover (). You can tilt the cover forward or backward for optimal
viewing clarity.
2. Press the power button ( ). T should he Windows operating system
start.
5
Turning Off
When you finish a working session, you can stop the system off by turning
the power or leaving it in Sleep or Hibernation mode:
To... Do this...
Power off
(Shutdown)
Select Start Power . Shut down
Sleep Use one of these methods:
Press the power button.*
Close the top cover.*
Press Fn + F12.*
Select Start Power . Sleep
Hibernate By default, this option is not in the Start menu. If shown
you want to use the feature, set up accordingly in Windows
settings.
* “ ” the actionSleep is the default result of . You can change what the
action does through Windows settings.
7
Rear Components
For covers with an arrowhead icon, push the cover toward one side to unlock
and the other side to lock. The arrowhead points to the side for unlocking.
Standard Model
Expansion Model
8
Ref
Component Description
Kensington l ock Locks the computer to a station ry object for a
security.
USB 3. 1 Gen 2 port Connects a USB device.
RJ45 connector Connects the LAN cable.
HDMI connector Connects a HDMI monitor or TV set.
a connector VGA Connects an external display monitor.
b RS- s232 erial
connector
Connects a serial mouse or serial communication
device.
c
a RS- s232 erial
connector
Connects a serial mouse or serial communication
device.
b DisplayPort
connector
Connects a monitor or TV set.DisplayPort
c USB 3.1 Gen 2
Type-C port
Connects a USB device that supports USB Type-C
connection.
Power connector Connects the AC adapter.
RS- s232 erial
c onnector (optional)
Connects a serial mouse or serial communication
device.
Right- Side Components
For covers with an arrowhead icon, push the cover toward one side to unlock
and the other side to lock. The arrowhead points to the side for unlocking.
Standard Model
9
Expansion Model
Ref
Component Description
Barcode scanner
(optional)
Scans and reads barcodes.
SIM card slot
(optional)
Accepts a SIM card for models having the WWAN
module.
NOTE: The slot still exists but cannot be used for
models without the WWAN module.
Combo audio
connector
Connects a set of headphones or external speakers
with amplifier.
Supports a headset microphone with 4-pole TRRS
3.5mm jack.
PowerShare USB
2.0 port
Provides either of the below two functions
depending on your setting.
Charge . s a connected mobile device
- or -
Functions as a standard USB .0 port (default 2
setting).
Optical disc drive
Accepts an optical disc.
10
Left Side - Components
For covers with an arrowhead icon, push the cover toward one side to unlock
and the other side to lock. The arrowhead points to the side for unlocking.
Standard Model
Expansion Model
Ref
Component Description
Tether h ole Stylus . tethered to this hole
Stylus s lot For storing the stylus (optional).
SSD canister Contains the state drive, which is the mass solid-
storage device of your computer.
Depending on your model, you have one SSD (SSD 1)
or two SSDs (SSD 1 and SSD 2).
11
Ref
Component Description
CAUTION: hot-swappableThis device is not . Do not
remove it without turning off the system first.
Smart card
r eader
Accepts a smart card for additional security feature.
a
ExpressCard
s lot
Accepts an ExpressC . ard for additional functions
b
PC Card s lot A . ccepts a PC card for additional functions
Top- open Components
12
Ref
Component Description
Microphone Receives sound and voice for the computer.
Camera indicator
(optional)
Lights up when the camera is in use.
IR sensor
(optional)
Detects the infrared energy of objects to form an
image. The sensor flashes red light when in use.
The near infrared (IR) imaging capability allows
you to use Windows Hello face authentication.
Camera lens
(optional)
Allows you to use the camera function.
Camera cover
(optional)
Covers the camera lens.
Slide the camera cover toward the right to use the
camera; slide it toward the left for privacy protection.
LCD s creen Displays the output of the computer.
Select models have the touchscreen feature.
Stereo s peaker Sends out sound and voice from the computer.
Touchpad Serves as the pointing device of the computer.
Indicators
Power Lights green when computer is on.
Blinks green when computer is Sleep modein .
Battery Lights amber when the battery is being charged.
Lights green when battery charging is completed.
Blinks green to indicate in high -the battery’s built
temperature protection mechanism is activated.
CAUTION: Do not remove the battery during this
period.
Blinks red (once per second) when the battery’s
capacity is below 10%.
Blinks red rapidly (once per 0.5 second) when there
is a thermal protection problem. Ask for repair
service in case this happens.
13
Ref
Component Description
Blinks amber when the battery charging is in an
abnormal state. Replace the battery in case this
happens.
Caps Lock Lights green when Caps Lock is on.
Num Lock Lights green when Num Lock is on.
Hard Disk Blinks green computer is accessing thewhen the
hard disk ( SSD).
Airplane
mode
Lights green when the RF radio of any RF feature
(WLAN/Bluetooth/WWAN) is on. If Airplane mode
is switched on, the light turns off.
P1 button Toggles Blackout mode on or off.
In Blackout mode, the LCD backlight, keyboard/
button backlight, and LED indicators are all turned
off; and the sound is muted.
Can be changed to a different function using
G- Manager.
P 2 button Toggles the sunlight readable mode on or off.-
In sunlight readable mode, the LCD brightness is -
increased to the highest level.
Can be changed to a different function using
G- Manager.
Power button Turns the power on or off. (The default “off” state
is “ ”) Sleep mode.
Keyboard Serves as the data input device of the computer.
Select models have one of the below components.
a HF RFID
reader
Reads data from HF tags. RFID
b Fingerprint
scanner
Serves as the fingerprint verification, preventing
unauthorized access to your computer.
15
Chapter 2
Operating Your
Computer
This chapter provides information about the use of the computer.
If you are new to computers, reading this chapter will help you learn the
operating basics. If you are already a computer user, you may choose to
read only the parts containing information unique to your computer.
CAUTION:
Do not expose your skin to the computer when operating it in a very
hot or cold environment.
The computer can get uncomfortably warm when you use it in high
temperatures. circumstanceAs a safety precaution in such a , do not
place the computer on your lap or touch it with your bare hands for
extended periods of time. Prolonged body contact can cause discomfort
and potentially a burn.
16
Using the Keyboard
Your keyboard has all the standard functions of a full sized computer -
keyboard plus a key added for specific functions.n Fn
The standard functions of the keyboard can be further divided into four
major categories:
Typewriter keys
Cursor- control keys
Numeric keys
Function keys
Typewriter Keys
Typewriter keys are similar to the keys on a typewriter. Several keys are
added such as the , and lock keys for special purposes. Ctrl, , Alt Esc
The Control ) / Alternate key is normally used in combination with (Ctrl (Alt)
other keys for program unctions. The Escape -specific f (Esc) key is usually
used for stopping a process. Examples are exiting a program and canceling a
command. The function depends on the program you are using.
Cursor- Control Keys
Cursor-control keys are generally used for moving and ing purposes.edit
NOTE: The word “cursor” refers to the indicator on the screen that lets you
know exactly where on your screen anything you type will appear. It can
take the form of a vertical or horizontal line, a block, or one of many other
shapes.
17
Numeric Keypad
A 15-key numeric keypad is embedded in the typewriter keys as shown next:
Numeric keys facilitate entering of numbers and calculations. When Num
Lock is on, the numeric keys are activated; meaning you can use these keys
to enter numerals.
NOTE:
When the numeric keypad is activated and you need to type the English
letter in the keypad area, you can turn Num Lock off or you can press Fn
and then the letter without turning Num Lock off.
Some software may not be able to use the numeric keypad on the
computer. If so, use the numeric keypad on an external keyboard instead.
The Num Lock “ enu” key can be disabled. (See Main M in Chapter 5.)
18
Function Keys
On the top row of the keys are the function keys: F1 to F12. Function keys
are multi purpose keys that perform functions defined by individual -
programs.
Fn Key
The Fn key, at the lower left corner of the keyboard, is used with another
key to perform the alternative function of a key. To perform a desired
function, first press and hold , then press the other key.Fn
Hot Keys
Hot keys refer to a combination of keys that can be pressed any time to
activate special functions of the computer. Most hot keys operate in a cyclic
way. Each time a hot key combination is pressed, it shifts the corresponding
function to the other or next choice.
You can easily identify the hot keys with the icons imprinted on the keytop.
The hot keys are described next.
Key Description
Switches the keyboard backlight on or off.
Switches the (radio frequency)RF radio on and off.
When off, all wireless modules (such as WLAN, Bluetooth,
and WWAN) cannot be used. When on, individual settings of
the module work.
Decreases the sound volume.
Increases the sound volume.
Switches the display output to the next choice if an
external display is connected.
19
Key Description
Choices are:
LCD only
LCD + External display (Duplicate)
LCD + External display (Extend)
External display only
The hot keys are equivalent to Windows logo .key + P
Decreases the LCD brightness.
Increases the LCD brightness.
Switches the touchscreen function off or on (select models
only).
Switches the touchpad off or on.function
Switches or the system sound output off (mute) on.
Switches backlight off or on. the display
Serves as the sleep button that you can define with
Windows’ Power Options.
Windows Keys
The keyboard has two keys that perform Windows specific functions: -
Windows Logo key and Application key.
The - Windows Logo key opens the Start menu and performs software
specific functions when used in combination with other keys. The
Application key usually has the same effect as a right mouse click.
20
Using the Touchpad
CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing
so may damage the touchpad surface.
NOTE:
You can p to toggle the touchpad on or off.ress Fn+ F9 function
For optimal performance of the touchpad, keep your fingers and the
pad clean and dry. When tapping on the pad, tap lightly. Do not use
excessive force.
The touchpad is a pointing device that allows you to communicate with the
computer by controlling the location of the pointer on the screen and
making selection with the buttons.
The touchpad consists of a rectangular pad (work surface) and a left and a
right button. To use the touchpad, place your forefinger or thumb on the
pad. The rectangular pad acts like a miniature duplicate of your display. As
you slide your fingertip across the pad, the pointer (also called cursor) on
the screen moves accordingly. When your finger reaches the edge of the
pad, simply relocate yourself by lifting the finger and placing it on the other
side of the pad.
Here are some common terms that you should know when using the
touchpad:
Term Action
Point Move your finger on the pad until the cursor points to the
selection on the screen.
21
Term Action
Click Press and release the left button.
–or–
Tap gently anywhere on the pad.
Double- click Press and release the left button twice in quick succession.
–or–
Tap twice on the pad rapidly.
Drag and
drop
Press and hold the left button, then move your finger until
you reach your destination (drag). Finally, release the
button (drop) when you finish dragging your selection to
the destination. The object will drop into the new location.
–or–
Gently tap twice on the pad and on the second tap, keep
your finger in contact with the pad. Then, move your finger
across the pad to drag the selected object to your
destination. When you lift your finger from the pad, the
selected object will drop into place.
TABLE NOTE: If you swap the left and right buttons, “tapping” on the
touchpad as an alternative method of pressing the left button will no
longer be valid.
Touch Gestures
The touchpad supports touch gestures for such asWindows -finger two
scrolling, pinch zoom, rotating, and others. For settings information, go to
ETD Properties
Options.
Configuring the Touchpad
You may want to configure the touchpad to suit your needs. For example, if
you are a left-handed user, you can swap the two buttons so that you can
use the right button as the left button and vi e versa. You can also change c
the size of the on screen pointer, the speed of the pointer, and so on.-
To configure the touchpad, go to Settings D
evices
Touchpad (for
Windows 10) or Settings
Bluetooth & devices Touchpad (for Windows
11).
22
Using the Touchscreen (Optional)
NOTE: function You can press Fn+F8 to toggle the touchscreen on or off.
CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the
touchscreen. Doing so may damage the touchscreen surface. Use your finger
or the included stylus.
Select models have a capacitive touchscreen. This type of touchscreen
responds to objects that have conductive properties, such as fingertips and a
capacitive- . tipped stylus You can navigate on the screen without using a
keyboard, touchpad mouse. , or
You can change the touchscreen sensitivity rio. scenasettings to suit your
Double-tap shortcut the Touch Screen Mode on Windows desktop to open
the settings menu and select one of the options (as shown below).
NOTE:
In high temperatures (above 60 oC / 140 °F), set the mode to Touch instead
of or Glove Pen mode.
If liquid is spilled on the touchscreen causing a wet area, the area will stop
responding to any inputs. For the area to function again, you must dry it.
Enables simultaneous use
with Getac stylus or finger
touch.
(You must use the
stylus
supplied with your
model
.)
Has a higher sensitivity to allow use
with gloves
( referring to warm
gloves or work gloves,
not referring
to touchscreen
- . capable gloves)
Select this mode when liquids,
such as raindrops, are falling
on the screen and should be
rejected as input. Works best
with fingertips.
23
The following table shows how you use the touchscreen to obtain
equivalent mouse functions.
Term/Action Equivalent
Mouse Function
Tap: T . ouch the screen once Click/Point
Double-tap: Touch the screen twice rapidly. Double- click
Tap and hold: Tap and hold until a popup menu
appears.
Right- click
Drag: Hold the stylus (or finger) on the screen and drag
across the screen until reach your destination ing .
Drag
Using Multi- touch Gestures
You can interact with your computer by placing two fingers on the screen.
The movement of the fingers across the screen creates “gestures,” which
send commands to the computer. Here are the -multi touch gestures that
you can use:
Gestures Actions
( = finger down; = finger up) Descriptions
Pan
(Scroll)
or
Drag 1 or 2 fingers up or down.
Use panning to see
another part of a page
that has scroll bars.
Zoom
(Pinch)
Move two fingers apart/toward each
other.
Use zooming to make
an item (a photo for
example) on the screen
larger or smaller. The
gesture works in
applications that
support mouse wheel
zooming.
24
Gestures Actions
( = finger down; = finger up) Descriptions
Rotate
or
Move two fingers in opposing
directions.
-or-
Use one finger to pivot around
another.
Use rotating to move a
picture or other item
on the screen in a
circular direction
(clockwise or counter-
clockwise). The gesture
works in applications
that support the
specific gesture.
Press
and Tap
Press on target and tap using a
second finger.
Use press and tap to
access the shortcut
menu.
Two-
finger
Tap
Tap two fingers at the same time
(where the target is in the midpoint
between the fingers).
The function is defined
by applications that
support the specific
gesture.
Flicks
Make quick drag gestures in the
desired direction.
Flick left or right to
navigate back and
forward in a browser
and other applications.
The gesture works in
most applications that
support back and
forward.
25
Using the Tether (Optional)
You can purchase a stylus and tether for your computer model. Use the
t ether to attach the stylus to the computer.
1. Thread one of the tether s loop through the hole of the stylus (’ ), tie a
dead knot at the end (), and pull the tether () so that the knot fills
in the hole and prevents the tether from falling off.
2. Insert the other loop to the tether hole on the computer ( ). Then,
insert the stylus through the loop () and pull it tight.
3. When not in use, store the stylus in the stylus slot.
26
Using and Wireless Network
Connections
Using the LAN
The internal 10/100/1000Base-T LAN (Local Area Network) module allows
you to connect your computer to a network. It supports data transfer rate
up to 1000 Mbps.
Using the WLAN
The WLAN IEEE 802.11(Wireless Local Area Network) module supports ax,
compatible with 802.11a/b/g . /n/ac
Turning On/Off Radio the WLAN
To turn on the WLAN radio:
Select the network icon in the lower right of the taskbar. Then, select the
Wi-Fi button.
To turn off the WLAN radio:
You can turn off the WLAN radio the same way you turn it on.
If you want to quickly turn off all wireless radio, simply switch on Airplane
mode. You can control the Airplane mode using one of the below methods.
Press . Fn+F1
Select the network icon in the lower right of the taskbar. Then, select
the button. Airplane mode
27
Connecting to a WLAN Network
1. Make sure that the WLAN function is enabled (as described above).
2. Click n . the network ico in the lower right of the task bar
3. In the list of available wireless networks, a network, and then click click
Connect.
4. Some networks require a network security key or passphrase. To connect
to one of those networks, ask your network administrator or Internet
service provider (IS security key or passphrase.P) for the
For more information on setting a wireless network , refer to connection
Windows online help.
Using the Bluetooth Feature
The Bluetooth technology allows wireless communications short-range
between devices without requiring a cable connection. Data can be transmitted
through walls, pockets and briefcases as long as two devices are within range.
Turning On/Off the Bluetooth Radio
To turn on the Bluetooth radio:
Go to (for Windows 10 Settings Devices Bluetooth & other devices ) or
Settings
Bluetooth & devices (for Windows 11). Slide the Bluetooth switch
to the On position.
To turn off the Bluetooth radio:
You can turn off the Bluetooth radio the same way you turn it on.
If you want to quickly turn off all wireless radio, simply switch on Airplane
mode. You can control the Airplane mode using one of the below methods.
Press . Fn+F1
Select the network icon in the lower right of the taskbar. Then, select
the button. Airplane mode
28
Connecting to another Bluetooth Device
1. Make sure that the Bluetooth function is enabled (as described above).
2. Make sure that the target Bluetooth device is turned on, discoverable
and within close range. (See the documentation that came with the
Bluetooth device.)
3. 10: Windows Settings Go to Devices Bluetooth & other devices
Add Bluetooth or other device Bluetooth.
Windows 11: Go to Settings
Bluetooth & devices Add device
Bluetooth.
4. Select the device you want to connect from the search results.
5. Depending on the device that you want to connect Bluetooth type of
to, you will need to enter the pertinent information.
For detailed information on using the Bluetooth feature, see Windows’
online Help.
Using the WWAN Feature (Optional)
A WWAN (Wireless Wide Area Network) uses mobile telecommunication
cellular network technologies to transfer data. The WWAN module of your
computer supports 3G and 4G LTE.
NOTE: Your model only supports data transmission; voice transmission is not
supported.
Installing a SIM Card
1. Turn off the computer and disconnect the AC adapter.
2. Open the cover of the SIM card slot.
3. Remove one screw to detach the small metal plate that covers the SIM
card slot.
29
4. Insert the SIM card into the . Make sure theslot golden contact area on
the card is facing upward and the b on the SIM card facing eveled corner
inward.
5. Close the cover.
Turning On/Off the WWAN Radio
To turn on the WWAN radio:
Select the network icon in the lower right of the taskbar. Then, select the
Cellular button.
To turn off the WWAN radio:
You can turn off the WWAN radio the same way you turn it on.
If you want to quickly turn off all wireless radio, simply switch on Airplane
mode. You can control the Airplane mode using one of the below methods.
Press . Fn+F1
Select the network icon in the lower right of the taskbar. Then, select
the button. Airplane mode
Se tting up a WWAN Connection
Go to Settings Network & Internet Cellular. (For detailed information on
c ellular settings in Windows, see Microsoft Support website.)
30
Using the Optical Disc Drive
( ) Select Models Only
Expansion models ha drive - . ve a Super Multi DVD or Blu ray DVD drive
CAUTION:
When inserting a , do not use force.disc
Make sure that the is correctly inserted into the tray, and then close disc
the tray.
Do not leave the tray open. Also, avoid touching the lens in the drive
tray with your hand. If the lens becomes dirty, the drive may malfunction.
Do not wipe the lens using materials with rough surface (such as paper
towel). Instead, use a cotton swab to gently wipe the lens.
FDA regulations require the following statement for all laser- : based devices
“Caution, Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.”
NOTE: The DVD drive is classified as a Class 1 laser product. This label is
located on the DVD drive.
NOTE: This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
31
Inserting and Removing a Disc
Follow this procedure to insert or remove a disc:
1. Turn on the computer.
2. Press the eject button and the tray will slide out partially. Gently disc
pull on it until it is fully extended.
3. To insert a , place down the in the tray with its label facing up. disc disc
Slightly press the center of the until it clicks into place.disc
To remove a , hold the by its outer edge and lift it up from the disc disc
tray.
4. Gently push the tray back into the drive.
NOTE: In the unlikely event that you are unable to release the tray by drive
pressing the button, you can manually release the eject disc. (See “Optical
Disc Drive Problems ” in Chapter 8.)
Eject button
32
Using the Fingerprint Scanner
(Optional)
CAUTION:
We shall not be liable for any loss or damage whatsoever resulting from
your use of the erprint scanner or neglect of fingerprint scannerfing use,
or any data loss resulting from such developments as fingerprint
authentication malfunctioning.
It is not recommended that you use the fingerprint scanner in a below-
freezing temperature. The moisture on your finger can freeze to the
scanner’s metal surface when you touch it, resulting in a failed operation.
Besides, touching freezing metal with your finger can cause frostbite.
T phe fingerprint scanner rovides a strong authentication mechanism based
on fingerprint recognition. You can log on to Windows and dismiss the lock
screen with an enrolled fingerprint instead of a password.
NOTE:
You can a fingerprint only after creating a password for the enroll
Windows user account.
The fingerprint logon process can take a while. This is because the system
has to check hardware devices and security configuration before initiating
the fingerprint scanner.
To enroll your fingerprint:
1. Go to Settings - Accounts Sign in options.
2. Select the fingerprint option. Follow the onscreen instructions to
complete.
Fingerprint scanner
33
Using RFID Reader the (Optional)
S n reader. elect models have a HF RFID The reader can read data from HF
(High Frequency) RFID (Radio Frequency Identification) tags.
The enabled RFID reader is by default. To enable or disable the reader, run
the BIOS Se tup program and select Advanced Device Configuration
RFID Card Reader. (See Chapter 5 for information on BIOS Setup.)
For optimal results when reading tag, have the tag face the antenna an RFID
in the same orientation as indicated by the icon on the exterior of the Tablet
PC. The icon indicates where the RFID antenna is located.
NOTE:
When not using a RFID card, do not leave it within or near the antenna n
area.
For enhanced applications and customization of the module, contact
your authorized Getac dealer.
R FID antenna
34
Using the Barcode Scanner
(Optional)
NOTE:
For enhanced applications and customization of the module, you can
use the Barcode Manager program. (For detailed information on the
program, see the program s online help.)’
The maximum operating temperature for the barcode scanner is 50 °C (122
°F).
If your model has the barcode scanner module, you can scan and decode
most common 1D and 2D symbologies. To read barcodes:
1. Start your processing software and open a new or existing file. Place the
insertion point (or called cursor) where you want the data to be entered.
2. Press the Trigger butt computer. on on your (The button function is
configured by G-Manager.)
3. Aim the scan beam at the barcode. (The scan beam projected from the
lens varies with models.)
Adjust the lens distance from the barcode, shorter for a smaller barcode ’
and farther for a larger one.
NOTE: Improper ambient light and scanning angle can affect the scanning
results.
35
CAUTION: When or immediately after using the barcode scanner for a long
time, do not touch the lens area as the area might be hot.
4. Upon a successful scan, the system beeps and the decoded barcode data
is entered.
Notes
Pulse repetition rate: 57.67 Hz
Scan angle: 360° tilt; ±45° pitch; ±60° skew
Product specificaties
| Merk: | Getac |
| Categorie: | Laptop |
| Model: | B360 G1 |
Heb je hulp nodig?
Als je hulp nodig hebt met Getac B360 G1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Laptop Getac
25 Juli 2024
15 December 2023
26 Augustus 2023
26 Augustus 2023
26 Augustus 2023
26 Augustus 2023
26 Augustus 2023
26 Augustus 2023
26 Augustus 2023
26 Augustus 2023
Handleiding Laptop
- Laptop HP
- Laptop Sony
- Laptop Samsung
- Laptop Xiaomi
- Laptop Panasonic
- Laptop LG
- Laptop Huawei
- Laptop Asus
- Laptop Medion
- Laptop Toshiba
- Laptop Acer
- Laptop Airis
- Laptop Alienware
- Laptop Apple
- Laptop Dell
- Laptop Denver
- Laptop Emachines
- Laptop Ematic
- Laptop Evga
- Laptop Fellowes
- Laptop Fujitsu
- Laptop Gigabyte
- Laptop Goclever
- Laptop Haier
- Laptop Hannspree
- Laptop Hercules
- Laptop Honor
- Laptop Hyundai
- Laptop Ibm
- Laptop Kogan
- Laptop Lenovo
- Laptop Lexibook
- Laptop Micromax
- Laptop Microsoft
- Laptop Mpman
- Laptop MSI
- Laptop Nec
- Laptop Packard Bell
- Laptop Peaq
- Laptop Pyle
- Laptop Razer
- Laptop Ricatech
- Laptop Schneider
- Laptop Sylvania
- Laptop Targa
- Laptop Thomson
- Laptop Trekstor
- Laptop Viewsonic
- Laptop Vizio
- Laptop Zebra
- Laptop Jay-tech
- Laptop Odys
- Laptop Olidata
- Laptop Oregon Scientific
- Laptop Naxa
- Laptop Aplic
- Laptop ADATA
- Laptop Humanscale
- Laptop Hamilton Buhl
- Laptop Compaq
- Laptop SIIG
- Laptop Tripp Lite
- Laptop SPC
- Laptop Prixton
- Laptop Coby
- Laptop AORUS
- Laptop Hähnel
- Laptop XPG
- Laptop ECS
- Laptop Inovia
- Laptop Atdec
- Laptop Vulcan
- Laptop System76
- Laptop General Dynamics Itronix
- Laptop CTL
- Laptop Everex
- Laptop Dynabook
- Laptop TechBite
- Laptop Schenker
Nieuwste handleidingen voor Laptop
26 Maart 2025
4 Maart 2025
10 Februari 2025
10 Februari 2025
10 Februari 2025
5 Februari 2025
5 Februari 2025
30 Januari 2025
27 Januari 2025
27 Januari 2025