Gerni Classic 110.5 Handleiding

Gerni Hogedrukreiniger Classic 110.5

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Gerni Classic 110.5 (7 pagina's) in de categorie Hogedrukreiniger. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
Safety Instructions Original Safety Instructions
Before fi rst use of the machine, read the instructions
carefully. Save instructions for later use.
Safety instructions marked with this symbol must be
observed to prevent personal injury or serious damage
to property.
● The instruction consists of 4 parts. Part 1:3 Safety Instruc-
tions. Part 2:3 Serial specifi c User Guide. Part 3:3 Trouble-
shooting, Serial specifi c Technical Data and Disposal. Part
1:4 Warranty Conditions.
Warnings This machine has been designed for use with
cleaning agents supplied or recommended by Gerni. The use
of other cleaning agents or chemicals may adversely affect
the safety of the machine. High pressure jets
can be dangerous if subject to misuse. The jet must
not be directed at persons, live electrical equipment
or the machine itself. Do not use the machine
within range of persons unless they wear protective clothes.
Do not direct the jet against yourself or others in order to
clean footwear. Risk of explosion – Do not spray fl amma-
ble liquids. High pressure washers shall not be used by
children or untrained personnel. High pressure hoses,
fi ttings and couplings are important for the safety of the ma-
chine. Use only hoses, fi ttings and couplings recommended
by Gerni. To ensure machine safety, use only original
spare parts recommended by Gerni. Water that has fl own
through back-fl ow preventers is considered to be non-potable.
Don’t use the machine if a supply cord or important parts
of the machine are damaged, e.g. safety devices, high pres-
sure hoses, trigger gun. Inadequate extension cords can
be dange rous. If an extension cord is used, it shall be suitable
for outdoor use, and the connection has to be kept dry and
off the ground. It is recommended that this is accomplished
by a cord reel which keeps the socket at least 60 mm above
the ground. Switch off and unplug the machine when
leaving it unattended, when fi nished using it or when convert-
ing it to another function, when doing repair and maintenance.
During use of high pressure washers, aerosols may be
formed. Inhalation of aerosols can be hazardous to health, for
the protection against aerosols a respiratory mask of class
FFP 2 or equivalent may be needed, depending on the clean-
128334140 b (06.2016)
Unit 1/13 Bessemer Street | Blacktown NSW 2148 | Tel.: 1300 556 710
Part 1:3 Safety Instructions, High Pressure Washers, Classic, Classic PG, Super and Super PG
Caution:
Read the instructions
before using the machine
ing environment.
Intended Use and Terms of Liability The Classic, Classic
PG, Super and Super PG series have been developed for
domestic cleaning pur poses only and for use in an upright
position. Any other use is considered as improper use. ● A
high pressure washer operates with different levels of pressure
and cleaning detergents for various cleaning tasks and results.
Always follow instructions on detergents for use, emergency
and disposal. Do not operate the machine at temperatures ●
below 0Β°C. Never start a frozen machine, never use it indoor
and never cover it during use. This is considered improper
and wrongful use. Use of wrongful pressure, detergent and/
or applications may cause damage to machine, surfaces,
material and devices. All of the above is considered improper
and wrongful use. Gerni accepts no liability for any damage
resulting from any improper or wrongful use.
Safety devices and their functioning The machine automa-
tically stops when releasing the trigger. The machine will start
again when reactivating the trigger. The spray handle features
a locking device. When activated, the spray handle cannot be
operated. The machine has an automatic self-resetting thermo
protector. If the machine is overheated, the thermo protector
will cut the power supply. In this case, wait for the machine to
cool down. An integrated hydraulic safety valve protects the
system from excessive pressure.
Precautions The electric supply connection shall be made
by a qualifi ed electrician and comply with IEC 60364-1. It is
recommended that the electric supply to this machine should
include either a residual current device that will interrupt the
supply if the leakage current to earth exceeds 30 mA for 30
ms or a device that will prove earth circuit. Use motor start/●
delayed fuses with characteristic D according to IEC 947-2 or
corresponding standards outside IEC. ● If the supply cord is
damaged, it must be replaced by an authorized Gerni distrib-
utor or similar qualifi ed person in order to avoid a hazard. ●
No actions needed for adjusting machines marked with dual
voltage and frequency. Supervise children not to play with ●
the machine. ● The operator and any one in the immediate
vicinity of the site for cleaning should take action to protect
oneself from being struck by debris dislodged during operation.
● Always wear safety boots, respiratory mask, ear protection,
goggles and protective clothing during operation. ● The high
pressure generated by the machine is a particular source
of danger. Hold the spray lance fi rmly with both hands. The
spray lance is affected by a kickback force and a sudden
torque during operation. See Part 3:3 for the actual size ●
of the kickback force. During transportation: Position the ●
machine horizontally on the backside and secure with straps.
Within EU High pressure washers shall not be used nor
maintained by children. The machine can be used by people
with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if given supervision or instructions
concerning use of the machine in a safe way and understands
the hazards involved.
Outside EU High pressure washers shall not be used nor
maintained by children or untrained people or people with
reduced physical, sensory or mental capabilities or lack of
experience and knowledge.
Part 2:3 provides a general overview of the machine and op-
eration elements along with illustrated sections on preparation,
operation, water connection, storage, and user maintenance.
AUnpacking and preparing for use Follow illustrations in
A.
B Connection to potable water mains High pressure
washers are not suitable for connection to the potable water
mains. Always check national regulations before connecting
the machine to potable water mains and use a back-fl ow pre-
venter if required. Use Β½" garden hose, 10-25 m. Follow ● ●
illustrations in B.
C Connection to other water sources You can connect the
machine to e.g. rain water vessels, rivers, lakes and cisterns
etc. and operate it in suction mode. Follow illustrations in C.
D Pairing of spray handle and machine Classic PG and
Super PG series only. After battery insert, D1.1, you have 2
min. to pair spray handle and machine. The light will fl ash
orange when searching for the machine. When paired, the
light will turn off. Follow illustrations D1.1 to D1.5. If pairing
aborts, do pairing according to illustrations D2.1 to D2.5. Power
regulation is indicated by green light, see illustration D3.1 and
D3.2.
E Leaving the machine unattended > 5 min. See
listed warnings. Follow the illustrations in E.
F After use and storage After use always: Turn off the
machine. Empty machine and accessories of water to avoid
frost damage. Remove the plug from socket. Disconnect water
inlet hose. Wind up electrical cable and high pressure hose
to avoid damage of cable, high pressure hose and fi ttings.
Storage of machine shall be frost free. Follow illustrations ●
in F.
G Maintenance, inspection and repair Maintenance of the
machine should always be done when starting up after long
time of storage. Before use, always inspect the machine
and equipment for damages. In case of damages, act accord-
ing to listed warnings. Do not attempt any maintenance not ●
described in the instructions. If the machine refuses to start,
stops, pulsates, pressure fl uctuates, motor buzzes, fuse blows
or no water comes out, check the trouble shooting diagram in
Part 3:3 Troubleshooting, Serial specifi c Technical Data and
Disposal. Any repair should always be made in Gerni autho-
rized workshop with original Gerni spare parts. ● User main-
tenance according to illustrations in G.
Part 1:4 Warranty Conditions
Warranty Conditions
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensa-
tion for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the failure
does not amount to a major failure. Gerni high pressure
washers for domestic use are warranted for 2 years from
the date of purchase by:
AUSTRALIA: Nilfi sk Pty LTd, Unit 1/13 Bessemer Street,
Blacktown NSW 2148, Phone: 1300 556 710, E-mail: War-
ranty.au@nilfi sk.com
NEW ZEALAND: Accent Tools Ltd, 232 Bush Rd, Albany,
Auckland 0632, Phone: 09 968 2610, E-mail: sales@ac-
cent-tools.co.nz
Equipment defects covered by this warranty will be repaired
or replaced by one of the service centres of the Gerni or-
ganisation. Find your local service agent here: http://www.
gerni.com.au/. If your high pressure washer or ac ces so ries
are handed in for repair, it must be followed by a description/
spe ci fi ca ti on of the fault, and the original purchase receipt, or
a copy, must be enclosed. Packing and postage/carriage is
not covered by the warranty. This warranty is provided in ad-
dition to the other rights and remedies of the purchaser under
the laws in relation to the goods to which the warranty relates.
Guarantee repairs are made on the following con dit ions:
β€’ that defects are attributable to fl aws or defects in mate-
rials or workmanship (wear and tear as well as misuse
are not covered by the gu a ran tee).
β€’ that the directions of the instruction manual have been
thoroughly observed.
β€’ that repair has not been carried out or attempted by other
than Gerni-trained service staff.
β€’ that only original Gerni accessories have been applied.
β€’ that the product has not been exposed to abuse such as
knocks, bumps or frost.
β€’ that only water without any impurities has been used.
β€’ that the high pressure washer has not been used for
rental nor used com mer cial ly in any other way.
Repairs not covered by the guarantee conditions will be
invoiced. (i.e. malfunctions due to Causes men ti o ned in
section Troubleshooting of Part 3:3.
Please phone 1300 733 171 (Australia) or 09 9682610 (NZ)
for service or warranty assistance only after checking
possible causes in Part 3:3.


Product specificaties

Merk: Gerni
Categorie: Hogedrukreiniger
Model: Classic 110.5

Heb je hulp nodig?

Als je hulp nodig hebt met Gerni Classic 110.5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Hogedrukreiniger Gerni

Handleiding Hogedrukreiniger

Nieuwste handleidingen voor Hogedrukreiniger