GeoBox G116 Handleiding

GeoBox Processor G116

Lees hieronder de 📖 handleiding in het Nederlandse voor GeoBox G116 (41 pagina's) in de categorie Processor. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/41

G116 User Guide Document: G116-1

-----------------------------------------------------------------------------------------------------------------------------------------------

G116 warping box User Guide

The absolute opposite of ordinary

Input: up to 4096*2160 @60Hz 4:4:4 full color sampling

Output: 2048*1080 @60Hz

New generation Warp engine

G116 User Guide Document: G116-1

-----------------------------------------------------------------------------------------------------------------------------------------------

Table of Contents

Disclaimer/Copyright Statement.......................................................................................................... 2

Warranty/RMA………………………………………………………………………………………………… 2

FCC/CE Statement............................................................................................................................... 2

Introduction……………………………………………………………....................................................... 3

Specification…………………………………………………………………………………………………… 4

Functions and Features....................................................................................................................... 5

1. Content in the packing box............................................................................................................ 7

2. Basic operation & settings………………………………………………………………………………. 7

2.1. Connecting the Input and output…………………………………….…..................................... 7

2.2. LED indicators………….....................................................…………....................................... 8

2.3. System Connection and Power On.......…………………………………………………………… 9

2.4. System Settings: Box ID, RS232, Ethernet............................................................................. 9

2.5. How to use IR Remote Controller........................................................................................... 11

2.6. Full screen and native aspect ratio………………………………………………………………… 12

2.7. Image rotation and flip………………………………………………………………………………. 12

2.8. Color adjustment…………………………………………………………………………………… 13

2.9. OSD Lock and unlock……………………………………………………………………………… 14

2.10. System synchronization…………………………………………………………………………… 14

2.11. Dual window display—PIP/POP (Picture in picture & side by side) …………………………. 15

2.12. Image Orientation (Flip & Rotation) ……………………………………………………………… 17

3. Geometry Alignment………………………………………………………………………………………. 18

3.1. Select the right Grid Pattern for geometry alignment……………………………………………. 18

3.2. Grid pattern pixel size selection……………………………………………………………………. 18

3.3. Geometry alignment………………………………………………………………………………… 19

3.3.1. Geometry alignment through remote controller……………………………………………. 20

3.3.2. [2x2] 4 corner geometry alignment…………………………………………………………… 20

3.3.3. [3x3], [5x3], [9x5] warp alignment……………………………………………………………. 21

3.3.4. Linearity grid line adjustment…………………………………………………………………. 21

3.3.5. Corner [Wall] geometry adjustment…………………………………………………………… 22

3.3.6. [Gwarp3] PC Tool ...……………………………………………………………………………. 24

4. [Video Wall] settings………………………………………………………………………………………. 25

4.1. [Zoom]: split the signal source……………………………………………………………………… 26

4.2. [Pan]: assign image location………………………………………………………………………… 26

4.3. [Overlap]: crop the right image for each projector………………………………………………… 27

4.4. [Position]: shift image position without changing image size……………………………………. 27

4.5. [Edge Mask] …………………………………………………………………………………………… 27

5. Save/Load system settings………………………………………………………………………………. 29

6. WebGui and Gwarp3 PC tool……………………………………………………………………………... 30

6.1. WebGui ……………………………………………………………………………………………… 30

6.2. Gwarp3 PC Tool ……………………………………………………………………………………. 31

7. Complete system aspect ratio adjustment……………………………………………………………..…. 31

8. Miscellaneous settings……………………………………………………………………………………. 33

8.1. Helpful tips…………………….……………………………………………………………………. 33

G116 User Guide Document: G116-1

-----------------------------------------------------------------------------------------------------------------------------------------------

8.2. EDID settings………………………………………………………………………………………… 33

8.3. HDMI vs. DVI output signal………………………………………………………………………… 34

8.4. System standby and automatically turn off output signal………………………………………. 35

8.5. Change background color…………………………………………………………………………. 35

8.6. Turn off Splash screen Logo………………………………………………………………………. 35

8.7. Limitation in audio output…………………………………………………………………………. 35

9. Trouble shooting…………………………………………………………………………………………… 35

9.1. Front panel LED indicators………………………………………………………………………... 35

9.2. Intermittent or loss of input signal………………………………………………………………... 36

9.3. Video quality issues………………………………………………………………………………… 36

9.4. Image position shift after installation……………………………………………………………… 37

9.5. System crash and malfunction ……………………………………………………………………. 37

9.6. Synchronization issue in the outputs……………………………………………………………… 37

10. Technical support…………………………………………………………………………………………… 38

11. Safety precaution and maintenance……………………………………………………………………… 39

Specification ……………………………………………………………………………………………………... 40

Revision History…………………………………………………………………………………………………… 41

Disclaimer/Copyright Statement

This information contained in this document is protected by copyright. All rights are reserved by VNS Inc.

VNS Inc. reserves the right to modify this document without any obligation to notify any person or entity of such revision. Copying,

duplicating, selling, or otherwise distributing any part of this document without signing a non-disclosure agreement with an authorized

representative of VNS Inc. is prohibited. VNS Inc. makes no warranty for the use of its products and bears no responsibility for any error of

omission that may appear in this document.

Product names mentioned herein are used for identication purposes only and may be trademarks of their respective companies.

Limited Warranty and RMA statement

This device is designed and tested to the highest standards and backed by two years’ parts and labor warranty. Warranties are eective upon

the rst delivery date to the end customer and are non-transferable. Warranty related repairs include parts and labor, but do not include

repair of faults resulting from user negligence, special modications, abuse (mechanical damage), shipping damage, and/or other unusual

damages. The customer shall pay shipping charges when the unit is returned for repair. Manufacturer will pay shipping charges for return

shipments to customers.

Manufacturer does not assume responsibility for consequential damages, expenses or loss of revenue, inconvenience or interruption in

operation experienced by the customer. Warranty service shall not automatically extend the warranty period.

User can pay extension fee to extend the warranty period. Please contact us for more details. In the event that a product needs to be returned

for repair, inform manufacturer and ask for a Return Material Authorization number.

FCC/CE statement

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Notice:

(1) An Unshielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and

television reception. It is essential that only the supplied power cord by used.

(2) Use only shielded cables to connect I/O devices to this equipment.

(3) Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Product specificaties

Merk:	GeoBox
Categorie:	Processor
Model:	G116
Kleur van het product:	Zwart
Gewicht:	1800 g
Breedte:	303 mm
Diepte:	180 mm
Hoogte:	45 mm
Ethernet LAN:	Ja
VGA (D-Sub)poort(en):	1
Vermogensverbruik (max):	28 W
Certificering:	CE/FCC/RoHS
HDCP:	Ja
HDMI versie:	2.0b
Aantal HDMI-invoerpoorten:	2
Aantal DisplayPorts:	1
RJ-45 ports hoeveelheid:	1
DisplayPort versie:	1.2a
Aantal HDMI-uitvoerpoorten:	1
Bedrijfstemperatuur (T-T):	0 - 45 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
RS-232/422-connector:	Ja