Gemini GEM-12USB Handleiding
Gemini
système hifi
GEM-12USB
Lees hieronder de đ handleiding in het Nederlandse voor Gemini GEM-12USB (20 pagina's) in de categorie système hifi. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/20
GEM-12USB
Portable Mixing Console
Empower Your Sound.
2GEM-12USB
PORTABLE MIXING CONSOLE
ENGLISH
2. Introduction
2. Before You Begin
3. Control Elements
5. DSP
7. SpeciďŹcations
8. Legal & Safety
SPANISH
11. Introduction
11. Before You Begin
12. Control Elements
15. DSP
16. SpeciďŹcations
17. Legal & Safety
Introduction
to design a console that can be used for a great variety of applications. And to
give you maximum ďŹexibility. In combination with its comprehensive range of
features and pro-level connections, the mixer will be your perfect tool for any
1. Before You Begin
Your mixer was carefully packed and the packaging is designed to protect
the unit from rough handling. Nevertheless, we recommend that you carefully
examine the packaging and its contents for any signs of physical damage, which
may have occurred during transit.
Be sure that there is enough space around the unit for cooling and please do
Congratulations! With the GEM-12USB you have purchased a state-of-the-art mixing
console that sets new standards. Our prime goal when develping the mixer was
kind of application: broadcasting, video dubbing or mixing a live band.
not place the mixer on any hot surface.
3
2. Control Elements
1. MIC Use this balanced XLR jack to connect microphone to the mixer.
2.
3. Use the GAIN control to adjust the input gain. This control should always be
turned fully counterclockwise when ever you connect or disconnect a signal
source to one of the inputs.
4. In addition, the mono channels are equipped with a steep LOW CUT ďŹlter
(slope at 18 dB/oct, -3 dB at 75 Hz) designed to eliminate unwanted low-
frequency signal components.
The upper (HIGH) and the lower band (LOW) are shelving ďŹlters that
increase or decrease all frequencies above or below their cut-oî frequency.
The cut-oî frequencies of the upper and lower band are 12 kHz and 80
Frequency of 2.5 kHz.
The PK LEDâs of the mono channels illuminate when the input signal is
driven too high, which could cause distortion. If this happens, use the GAIN
control to reduce the preamp level until the LED does not light anymore.
more channels and sum these signals to a bus. The bus appears at the
device. The return from the eîects unit is then brought back into the
+10 dB gain.
The PAN control determines the position of the channel signal within the
The LEVEL control determines the level of the channel signal in the main
mix.
for left (L/MONO) and right (R) channels. If you use only the (L/MONO)
jack , same sound is output from both Left and right speakers.
individual channels using the EFF SEND controls. You can connect this to
the input of an external eîects device in order to process the EFF busâ
⢠The phantom power required for condenser mics can be activated with
+48V PHANTOM switch.
Channels 1-4 feature an additional line input on a balanced 1/4â jack.
5-7.
Hz respectively. The (MID) band is configured as a peak filter with a center
8.
9. FX sends enable you to feed signals via a variable control from one or
consoleâs FX sent output and can be fed from there to an external effects
console on the stereo channels. Each FX send is mono and features up to
10.
stereo image. Turning PAN knob left will send Audio to the left side of
MASTER output and vice versa.
11.
12. LINE IN Each stereo channel has two balanced line level inputs on 1/4â jacks
13. The EFF SEND connector outputs the signal you picked up from the
Product specificaties
| Merk: | Gemini |
| Categorie: | système hifi |
| Model: | GEM-12USB |
Heb je hulp nodig?
Als je hulp nodig hebt met Gemini GEM-12USB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding système hifi Gemini
27 Mei 2023
Handleiding système hifi
Nieuwste handleidingen voor système hifi
27 Juni 2023