Garmin Vector 2S Handleiding

Garmin Diversen Vector 2S

Lees hieronder de 📖 handleiding in het Nederlandse voor Garmin Vector 2S (15 pagina's) in de categorie Diversen. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/15

Vector™ 2 and Vector 2S

Owner’s Manual

April 2015 Printed in Taiwan 190-01867-00_0A

right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such

changes or improvements. Go to for current updates and supplemental information concerning the use of this product.www.garmin.com

Garmin®, the Garmin logo, ANT+®, Edge®, and Forerunner® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. ANT

Agent™

, fēnix®, Garmin Connect™, USB ANT Stick

™

, and Vector™

are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without

the express permission of Garmin.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Exustar ™

is a trademark of

Exustar Enterprise Co. Ltd. Mac®

is a registered trademark of Apple Computer, Inc. Shimano ® is a registered trademark of Shimano, Inc. Training Stress Score™

(TSS), Intensity Factor™

(IF), and Normalized Power™

(NP) are trademarks of Peaksware, LLC. Windows ® is a registered trademark of Microsoft Corporation in

the United States and other countries. Other trademarks and trade names are those of their respective owners.

This product is ANT+® certified. Visit for a list of compatible products and apps.www.thisisant.com/directory

The FCC ID is located in the battery compartment. FCC ID: IPH-02767

M/N: A02767

Table of Contents

Introduction.....................................................................1

Thank You .................................................................................. 1

Getting Started............................................................................1

Tools Included............................................................................ 1

Tools Needed............................................................................. 1

Installing the Vector Components ............................................... 1

Preparing for the Installation .................................................. 1

Determining the Bicycle Chain Clearance ............................. 1

Installing the Pedal and Pedal Pod ........................................ 1

Installing the Left Pedal and Pedal Pod................................. 2

Installing the Right Pedal....................................................... 2

Installing the Shoe Cleats........................................................... 2

Adjusting the Release Tension.............................................. 2

Paring Vector with Your Edge 1000........................................... 2

Pedal Pod Status LED ........................................................... 2

Your First Ride............................................................................ 2

Entering the Crank Length..................................................... 2

Setting the Installation Angle................................................. 3

Customizing the Data Fields.................................................. 3

Training........................................................................... 3

Pedal-Based Power.................................................................... 3

Cycling Dynamics....................................................................... 3

Using Cycling Dynamics........................................................ 3

Power Phase Data................................................................. 3

Platform Center Offset........................................................... 3

Maintenance Tips....................................................................... 3

Vector Data..................................................................... 3

Sending Your Ride to Garmin Connect...................................... 3

Garmin Connect ..................................................................... 4

Disconnecting the USB Cable................................................4

Device Information......................................................... 4

Vector Device Care..................................................................... 4

Removing the Pedal Pods and Pedals ....................................... 4

Replacing the Pedals and Cartridges ......................................... 4

Vector Storage............................................................................ 5

Vector Specifications .................................................................. 5

USB ANT Stick™ Specifications.................................................5

Battery Information..................................................................... 5

Replacing the Pedal Pod Battery........................................... 5

Other Compatible Devices............................................. 6

Edge 810 and 510 Device Instructions....................................... 6

Pairing Vector with Your Edge 810 or 510 Device................. 6

Entering the Crank Length..................................................... 6

Edge 800 Device Instructions..................................................... 6

Pairing Vector with the Edge 800 Device.............................. 6

Entering the Crank Length..................................................... 6

Edge 500 Device Instructions..................................................... 6

Pairing Vector with the Edge 500 Device.............................. 6

Entering the Crank Length..................................................... 6

Customizing the Data Fields.................................................. 6

fēnix® 3 Device Instructions....................................................... 6

Pairing Vector with the fēnix 3 Device................................... 6

Customizing the Data Fields.................................................. 6

Entering the Crank Length..................................................... 6

fēnix 2 Device Instructions.......................................................... 6

Pairing Vector with the fēnix 2 Device................................... 6

Customizing the Data Fields.................................................. 7

Entering the Crank Length..................................................... 7

Forerunner® 920XT Device Instructions.................................... 7

Pairing Vector with the Forerunner 920XT Device................ 7

Customizing the Data Fields.................................................. 7

Entering the Crank Length..................................................... 7

Forerunner 910XT Device Instructions....................................... 7

Pairing Vector with the Forerunner 910XT Device................ 7

Customizing the Data Fields.................................................. 7

Entering the Crank Length..................................................... 7

Appendix......................................................................... 7

Registering Vector...................................................................... 7

Power Data Fields...................................................................... 7

Troubleshooting.......................................................................... 8

Updating the Software Using Vector Updater........................ 8

Updating the Vector Software Using the Edge 1000 ............. 8

Understanding the Multiple Status LED Flashes ................... 8

Performing a Static Torque Test............................................ 9

Crank Compatibility................................................................ 9

Third-Party Devices............................................................... 9

Index.............................................................................. 10

Table of Contents i

Product specificaties

Merk:	Garmin
Categorie:	Diversen
Model:	Vector 2S
Kleur van het product:	Zwart, zilver
Ingebouwd display:	Nee
Gewicht:	179 g
Breedte:	44 mm
Gewicht verpakking:	409 g
Soort:	Snelheids-/cadanssensor
Gebruikershandleiding:	Ja
Internationale veiligheidscode (IP):	IPX7
Bluetooth:	Ja
Materiaal:	Roestvrijstaal
Compatibiliteit:	Edge 1000 GPS bike computer\nVIRB Elite action camera\nVector power meter\nShimano Di2 electronic shifting system\nheart rate monitor\nspeed sensor\nEdge remote control\nsmartphone with Garmin Connect Mobile app
Levensduur batterij:	175 uur
Transmissie-afstand:	5 m
USB oplader inclusief:	Ja
Bedrijfstemperatuur (T-T):	-10 - 50 °C
Type batterij:	CR2032
Dikheid (max):	18 mm
Aantal sensorbanden:	1