Garmin Montana Marine Mount Handleiding

Garmin Navigator Montana Marine Mount

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Garmin Montana Marine Mount (87 pagina's) in de categorie Navigator. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/87
Instructions
Instructions
Istruzioni
Anweisungen
Instrucciones
Instruçáes
Instructies
Instruktioner
Ohjeet
Instruksjoner
Instruktioner
Instrukcja
Pokyny
Π˜Π½ΡΡ‚Ρ€ΡƒΠΊΡ†ΠΈΠΈ
Marine Mount
MONTANAβ„’ 600 Series
2 Montana600SeriesMarineMountInstructions
ο‚‹
ξ€ͺ
See the Important Safety and Product Information in the Montana product box
before installing the marine mount.
ο‚‹

Always wear safety goggles, ear protection, and a dust mask when drilling,
cutting, or sanding.
notice
Incorrectly wiring the power or audio cable with bare wire leads can result
in damage to the boat or the battery. Garmin strongly recommends having an
experienced installer with the proper knowledge of electrical systems install the
mount.
The metal contacts on the Montana and the mount should be kept dry to avoid
equipment damage. Use the weather cap on the mount at all times when the unit is
not mounted to keep the metal contacts dry and protected.
ξ€·ξ’ξ’ξξ–ξ€ƒξ„ξ‘ξ‡ξ€ƒξ€©ξ„ξ–ξ—ξˆξ‘ξˆξ•ξ–ξ€ƒξ€±ξˆξˆξ‡ξˆξ‡
β€’ Drill
β€’ Hardware for the swivel mount: 3 bolts or 3 screws (not included)
β—¦#8 (4 mm) pan-head machine bolts with matching nuts and washers and
a 5/32 in. (5 mm) drill bit
β—¦#8 (4 mm) pan-head self-tapping screws and a 1/16 in. (1.5 mm) drill bit
for drilling starter holes
Montana600SeriesMarineMountInstructions 3
β€’ 3/8 in. (9.5 mm) wrench or socket
β€’ Phillips or at screwdriver
ξ€Άξˆξξˆξ†ξ—ξŒξ‘ξŠξ€ƒξ„ξ€ƒξ€°ξ’ξ˜ξ‘ξ—ξ€ƒξ€―ξ’ξ†ξ„ξ—ξŒξ’ξ‘
notice
Do not place the swivel mount in an area that is exposed to extreme temperature
or conditions. The temperature range for the Montana is from 5Β°F to 158Β°F (from
-15Β°C to 70Β°C). Extended exposure to temperatures exceeding this range (in
storage or operating conditions) may cause failure of the LCD screen.
Use pan-head machine bolts or self-tapping screws to secure the swivel base. If
you use screws with countersunk heads, you may damage the mounting bracket.
Select a location to install the mount.
β€’ The location provides a clear view of the screen and access to the Montana.
β€’ The location is sturdy enough to support the Montana and the mount.
β€’ The location allows room for the routing and connection of the cables.
There should be at least a 3 in. (8 cm) clearance behind the case.
ξ€°ξ’ξ˜ξ‘ξ—ξŒξ‘ξŠξ€ƒξ—ξ‹ξˆξ€ƒξ€₯ξ•ξ„ξ†ξŽξˆξ—ξ€ƒξ€€ξ–ξ–ξˆξξ…ξξœ
notice
Do not overtighten the screws or bolts; you may damage the swivel base.


Product specificaties

Merk: Garmin
Categorie: Navigator
Model: Montana Marine Mount

Heb je hulp nodig?

Als je hulp nodig hebt met Garmin Montana Marine Mount stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Navigator Garmin

Handleiding Navigator

Nieuwste handleidingen voor Navigator