Garett Kids Sun Pro 4G Handleiding

Garett Smartwatch Kids Sun Pro 4G

Lees hieronder de 📖 handleiding in het Nederlandse voor Garett Kids Sun Pro 4G (2 pagina's) in de categorie Smartwatch. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Garett

Kids Sun Pro 4G

User manual

Thank you for purchasing Kids Sun Pro 4G

SAFETY ISSUES

Please read this manual carefully before use and keep it for future

reference. T he manufacturer shall bear no liability for any damage/injuries

caused by improper use. Depending on the smartwatch batch, certain

functions may differ from the functions described in this user manual.

Using this device near medical devices may disrupt their operation. Users

should pay particular attention when using the smartwatch near medical

devices such as pacemakers, hearing aids, and other electronic medical

devices.

Do not dispose of the device in ﬁre. There is a risk of the batteries exploding

and the resulting threat to life and health.

Protect the device from heat sources and direct sunlight.

Do not store the device in damp places or at high temperatures, as this

may cause electric shock or ﬁre.

The device is not resistant to prolonged immersion in water.

Do not swim or dive while wearing the device.

In case of damage/failure, please stop using the product and contact

the Garett service centre. Attempting to repair it yourself may damage

the device and void the warranty.

Clean the device only with a soft, slightly damp cloth. Do not use strong

detergents or any other stimulants to clean the product.

Do not swim while wearing the device. The IP67 standard does

not guarantee that the smartwatch will be waterproof while

swimming. The forces acting on the device while swimming may

cause it to become unsealed and damaged.

Touchscreen display

Nano SIM card slot

Touch back button

Photo/video camera

Torch

PRODUCT DESCRIPTION

Measuring sensor set

Function button (On/Off/Wake/Lock screen/SOS)

- 2 - - 3 - - 4 - - 5 -

INSTALLATION

Put the watch on your wrist and adjust the strap length so that the device

strap is not too loose.

NANO SIM CARD REQUIREMENTS

1. Nano SIMThe device requires the installation of a card.

2. mustThe SIM card meet the following requirements:

• must be activeThe card (if it is a new card, you will need to activate it on

a mobile phone by making an outgoing call),

• must be topped upThe card (applies to prepaid cards),

• must not have an active PIN codeThe card (to check whether the card

has an active PIN blockade, you must install it in your mobile phone and

check whether a PIN code is required when starting the phone. If so, the

PIN lock is active and will need to be disabled in the phone settings or by

contacting the operator),

• must support 2G/3G/4G operating modes have InternetThe card ,

service enabled have a Number Identiﬁcation function, and .

SIM cards offered by operators as data-only, e.g. those designed

for tablets, may not function properly in the device.

Since the device uses an internet connection, we recommend purchasing

an internet package from the operator to avoid additional costs. A 1

GB/month package is sufﬁcient. The fees for internet connection, voice

calls and text messages are speciﬁed in the price list of your mobile

operator.

INSTALLING THE NANO SIM CARD

1. First, remove the screws securing the Nano

SIM(2) card port cover located on the left side of the

watch.

2. Remove the cap and then place the card in the

port, inserting it according to the illustrative

diagram in the picture, i.e., with the card chip

towards the display and the notched corner of

the card towards the slot.

3. A properly installed SIM card will make a

distinctive "click" sound. Gently push it towards

the slot to the card until you hear a remove "click" .

The mechanism will eject the SIM automatically

card.

4. Replace and screw on the cover, taking care to

ensure the correct ﬁt and location.

STANDARD

SIM

MICRO

SIM

NANO

SIM

Install the SIM card when the

device is turned off.

Turning on/off

Press and hold the for approximately function key(7) 3 seconds

to start the device. To switch it off, go to Settings>Off.

If the smartwatch does not start, try charging it.

After starting

The smartwatch is operated via the and a screen touch button,

as well as a .function button

OPERATION

Changing the watch face

Touch and hold the home screen to display the smartwatch face

change menu Swipe right/left. to select the face, and then click

anywhere on the screen to conﬁrm your selection.

Navigation

Swipe right main menuon the home screen to access the . Touch

the screen to enter the selected function. After entering a

function, swiping to the right or tapping the touch return key(3)

allows you to return to the previous screen while pressing the

function key(7) takes you to the main screen.

Swipe left App Market on the home screen to access the , a menu

for installing additional apps on your smartwatch.

Swipe down on the home screen or the menu to access the

settings bar. Allows you to view selected functions of the

smartwatch, and if you swipe to the right, view recent

notiﬁcations.

Swipe up on the home screen or menu to access the settings

menu. Allows you to view and quickly change selected

smartwatch functions.

- 6 -

If there is no animation, make sure the watch is connected correctly.

When the battery has completely run out, the animation may take 10-20

minutes to appear. It is recommended to charge your smartwatch for

about 2 hours before turning it on for the ﬁrst time.

The charging voltage should not exceed 5V.

The recommended maximum charging current is 1A.

CHARGING

1. The smartwatch charges using the included with the magnetic cable

device.

2. Attach the end of the magnetic cable so that the contacts of the watch

touch the contacts of the charging cable. Then connect the other end of

the cable to the USB port of a computer or a USB power adapter. When it is

connected properly, the charging animation will appear on the watch

screen.

3. Wait until you see ) and GSM coverage (icon - internet connection

(highlighted icon - ) They are necessary for further conﬁguration of the

device. After a minute, and if these values do not appear, make sure that the

SIM card meets all the requirements described above the watch and that

is in a place where it can establish network contact. You should also turn

off ( ) and restart the watch. If you have and Settings>Turn off GSM coverage

still no is available ( ), this could internet connection no icon illuminated

mean that the is not conﬁgured correctly, which is done through the APN

watch settings, described further in the section. TROUBLESHOOTING

4. When the internet connection is active, proceed to the next step, i.e.

installing the Garett Tracker app on your phone. The main menu of the

smartwatch is described later in the manual. The device will be fully

functional after of the watch via the registration conﬁgurationand Garett

Tracker app.

INSTALLING THE GARETT TRACKER APP

The smartwatch works with your smartphone using the app. Garett Tracker

Before use, you must ﬁrst download the app from the Google Play Store or

the AppStore and install it on your phone. You can ﬁnd the app by entering

the name " " in the store search engine or scanning the Garett Tracker

corresponding QR code provided below.

iOSAndroid

Video tutorial – Garett Tracker

How do you use the Garett Tracker app?

If you want to learn more about conﬁguring the device via the Garett

Tracker app, we recommend checking out this video – scan the QR code

or . use the link

https://youtu.be/1VJjvs1raaA

Please remember to grant the app the required consent and

permission before registration to work correctly. If you refuse,

selected functions of the app may not work properly or will be

unavailable.

5.Then enter the veriﬁcation code from

the image generated on the right.

6.In the last ﬁeld, enter your password

which, together with the e-mail address,

will be used to log in to the app. The

password may consist of 6-12 characters.

Polish characters and special characters

are not allowed.

7.After ﬁlling in all the details, click

Registration.

8.T hen press the button to Add Device

add the watch to the previously created

account.

9.On the next screen, scan the QR code

using the button from the sticker on

the back of the watch ( ) or inREG CODE

GARETT TRACKER APP

After completing the registration and , the adding the device home screen

of the app will be displayed, showing the map with the last watch location.

The bubble over the pin specifying the location displays the source of location

data ( and GPS/LBS/WiFi address), , time of the last location watch battery

level.

NOTE: When using any function of the

Garett Tracker app or trying to

conﬁgure the settings, the following

message may appear: "The device is

ofﬂine". This means that the

smartwatch has no active internet

connection or is out of network range.

Check whether your SIM card is

properly installed and meets all the

requirements described earlier in the

manual. If the SIM card is properly

installed and meets the criteria

described, the lack of signal may be due

to an incorrect APN conﬁguration. The

way to get the proper APN

conﬁguration is described later in the

manual in the TROUBLESHOOTING

section.

- 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 -

To deﬁne the area, and then select any location on the map – click +

this will be the . Enter the name and radius of centre of the geofence

the area ( ).max. 2 km

- Locate: Clicking on this icon refreshes the data on the current

location of the watch.

- History: Displays the route travelled by the user of the watch from the

previous days.

- Pop-up menu: T he ability to display and conﬁgure selected watch

functions:

- Whitelist: Incoming call ﬁltering – it means that only the numbers

on the Whitelist and that have been previously saved in the phone

book will be able to get through to the watch.

- Timetable: Conﬁgure the timetable that can be displayed on the

watch under Learning>Timetable.

- Remote camera: T ake a photo using the watch camera and send it

to the app.

- Activity: Conﬁguration and display of the activities performed by

the watch user, up to several days back.

- Video chat: The ability to make video calls between the

administrator and the associated watch.

Due to the large amount of data transmitted during a video call,

a high-bandwidth internet connection is required. LTE

connection is recommended. In locations with poor mobile

network coverage, such as areas outside cities or towns,

shopping malls or underground car parks, making video calls

may not be possible, or the calls may be of poor quality with

interruptions in video transmission.

- Device lock The ability to restrict the functionalities of the

watch to SOS calls only.

- Alarms: View and conﬁgure the alarms active on the device

( ).max. 3

- Notiﬁcations: History of recent notiﬁcations, e.g. SOS calls, low

battery.

- Rewards: Reward system – each reward is one heart. The total

number of rewards is displayed on the home screen of the watch.

- Personal details: The ability to display and conﬁgure the user details:

- Proﬁle: Conﬁgure the personal details of the account

administrator.

- Device list: The ability to display

and add/edit associated devices.

By clicking on a device name,

you can change its details.

The option allows you to Switch

switch the active device, i.e. the

one being currently tracked.

To remove a watch from the list,

select Edit>Delete.

- Change password: Change the

password used in the app.

- Log out: Log out of the app.

- Change map view: The ability to change the map style.

- Phone location: Indicates the current location of the phone on which

the app is launched.

- Device location: Indicates on the map the location of all associated

devices in the app.

- Switch: Quickly switch between associated devices.

- Settings: The ability to display and conﬁgure the functions:

- SOS numbers: Conﬁgure SOS

numbers ( ). Pressing and max. 3

holding the SOS button on the

watch will call the ﬁrst number.

If the call is unsuccessful, the

watch will automatically dial the

second and then the third

number. If the SOS call is

answered by the voicemail

active on one of the SOS

numbers, it will not be redirected to the next number.

Magnetic charging port

Interchangeable strap

INITIAL START-UP

1. When the Nano SIM card is installed correctly in the watch and meets all

the requirements described above, start the device by pressing and holding

the function button(7) for approximately 3 seconds.

2. After starting the watch, the home screen will appear, displaying the time

and date. on the main screen or menu will display: Swiping down the

internet connection GSM coverage WiFi signal and battery level, , , .

- internet connection

- GSM coverage

- Wi-Fi coverage

- battery level

69%

REGISTERING IN THE APP

1. Garett T racker Launch the app.

2.When you launch the app, you'll see a where you can log in to login screen

your account (if you've already created one), register a new account, or

change the app's language.

3.To register a new account, click Registration.

4.In the ﬁrst ﬁeld, enter your address that will serve as your e-mail login to

the app.

Please remember or note down

the e-mail address and password

used to register the watch,

because the account to which

the device was ﬁrst assigned is

the administrator's account.

Re-registration will be possible

only after obtaining permission

f rom the administrator or after

contacting our T echnical Support

Department: serwis@garett.pl

13. OKAfter ﬁlling in all the details, click ,

and the device and Garett Tracker app

will be fully functional.

To ensure the most accurate location, the smartwatch must be in

an open area, in order to have an accurate and stable GPS signal.

When there is no GPS signal, e.g. because it is inside a building,

the location is determined based on the nearest mobile network

transmitter. In this case, the indicated position of the device may

differ from its physical location.

- Chat: The ability to send short voice

messages ( ), shortmax. 15 seconds

text messages ( ) max. 30 characters

and photos to the watch

- GEO-fence: This function lets you

deﬁne the area in which the watch

user may move around. The app will

inform you when the user crosses

the geofence.

www.garett.eu

the watch settings. The code can be also entered manually.

10.Enter the , and it will be displayed as the name of the device device name

associated with your account.

11. relationshipThe next step is to choose your with the user of the

smartwatch.

12.Optionally, enter the phone number of the device, which will facilitate

communication.

In the event of any problems with registration of the device,

please contact our Technical Support Department:

serwis@garett.pl

When conﬁguring the SOS Numbers function – and Voice

monitor – enter the numbers without the country code (if

necessary, add 0048 before the number for PL). Using the "+"

symbol may prevent calls from being made.

depending on the . Click temperature of the measured objects

Reset to reset the results Exit to exit T he measurement or .

results are not stored in the watch memory or transferred to the

Garett T racker application.

- Health: Pulse BloodFunction for measuring health parameters ( ,

Pressure Blood Oxygen begin the measurement, ). Click START to .

The values for all 3 health functions are measured

simultaneously. The result will be displayed on the watch screen

and stored in the Garett Tracker Activity>Blood app under

Pressure/Pulse when the measurement is complete.

in the list view as soon as you select the SMS function.

- Chat: Voice/text messaging function. Displays recent voice notes

and sent from the app to the recent text messages Garett T racker

watch. It is possible to send a voice message f rom the watch. To

send press and hold dictating a voice memo, while a message

( ). the message to the max. 15 seconds Release the button to send

watch administrator. It will appear in the Garett Tracker app under

the tab. Using the button, the user :Chat can send

* emoticon,

* photo taken with camera,

* photo selected from the watch gallery.

Clicking start a video call.will

- Call history: Call history function. The possibility of displaying the

exact date and time of the last voice calls.

- Video call: Video calls function. Possibility of making video calls

between the administrator and the associated watch. Group chat

also available. Select a person and to start. You can conﬁrm the call

terminate the call by pressing the red phone icon function or the

button(7). Incoming calls are answered with the green phone icon

and similarly rejected with the or the .red function key

Due to the large amount of data transferred during a video call, a

high-speed internet connection is required, so an LTE or WiFi

connection is recommended. For locations with poor mobile

network coverage, such as out-of-town areas, shopping malls or

underground car parks, it may not be possible to make a video

call or it will be of poor quality with interruptions in video

transmission.

- Camera: Camera function. Take photos with the watch's built-in

camera. To take a photo, click . The photo will be saved in the

device's gallery send. It is possible to a photo to the watch

administrator from the Smartwatch - , then select a Gallery click

photo from the gallery and down to . It will appear in hold it send

the app under the tab.Garett T racker Remote Camera

- Watch ﬁnder: T he ability to

search for your watch – this

function triggers an audible

alarm.

- Turn off watch: Turn off the

watch remotely.

- Restart watch: Restart the

smartwatch.

- Restore factory settings: The

ability to reset the watch to

factory settings.

- Delete account: Send a request

to delete the account from the

app server. The account should

be deleted within one hour.

Log out: Log out of the app.

The SOS function is active only when the watch is within range of

the network, has an internet connection, and the account is

sufﬁciently topped up.

- Voice monitoring: Remote voice monitoring. Enter a phone

number to activate the function. The watch will automatically call

back the phone number entered within 30 seconds. The watch

- Night-time battery saving mode: Ability to activate/deactivate the

battery saving mode, which limits the network functions of the

watch between 22:00 and 6:00 (extends the operating time of the

watch).

- SMS messages: The ability to read SMS messages sent to the

number on the watch.

- Body temperature: Ability to perform a remote temperature

measurement (automatic or unitary - at a set time), display the

measurement history change the temperature unit or .

Additionally, the administrator will receive an when SMS message

the measured temperature value exceeds the set range with the

SMS notiﬁcation function.

- Operating modes: Select the refresh frequency of the watch

location:

* Tracking mode - refreshing every 1 minute (shortens the running

time of the watch),

* Normal mode - refresh every 10 minutes,

* Battery saving mode - refreshes every hour,

* Sleep mode - manual positioning.

- SMS notiﬁcations: On/Off and

conﬁguration of SMS

notiﬁcations to the speciﬁed

phone number.

- Family members: List of

administrators who can manage

the watch.

- Phone book: The ability to add

contacts, which will be displayed

in the phone book of the watch.

- Wi-Fi settings: Conﬁgure the

Wi-Fi network that the watch

connects to automatically,

without entering a password.

- Time zone: Conﬁgure the time zone of the watch

(PL: East: GMT +1:00).

- Language: The option to change the language of the smartwatch.

- Management:

* Numeric keypad: Enable/disable the numeric keypad function on

the watch. Turning on this function allows the watch user to dial

and make a call to any number (including those not entered in the

phone book). If you do not want the watch user to be able to

contact numbers not entered in the phone book, turn this

function off.

* GPS positioning: Option to enable/disable the watch's positioning

function via GPS.

- Power plan: Schedule your watch to turn on or off.

- LBS: T he ability to turn on/off the tracking function of the watch

based on the nearest mobile network transmitter, in the event that

the watch loses GPS signal.

Depending on your device model, the above-described functions

of the Garett Tracker application may vary. In case of any

problems, don't hesitate to contact our Technical Support

Department: serwis@garett.pl

- 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 -

TECHNICAL SPECIFICATIONS

GSM module:

2G / 3G / 4G

Processor:

SL8521E

Battery:

800 mAh

Display:

IPS 1,3″

Face dimensions:

47 x 41 x 15,7 mm

Water resistance:

IP67

Dedicated app:

Garett Tracker

Warranty:

24 months

Interchangeable strap

Weight:

max. 58 g

More information about this device is available at www.garett.pl. Visit our

website to see more products and accessories.

- 24 - - 25 -- 22 - - 23 -

Depending on the software version of your device, the

smartwatch functions described above may vary. In the event of

any problems, don't hesitate to contact our Technical Support

Department: serwis@garett.pl

Once you have received the correct answer, move on to APN settings:

Step 1: Go to APN settings:

Settings > Mobile networks > APN

Step 2: internetOnce in the APN settings, select the ﬁrst item described as

and then the option.Edit

Step 3: EditBy selecting on the watch screen, you will see a list of the

device's . Depending on the operator of the SIM card in the APN settings

watch, set them according to the instructions below (the change applies

only to the values described below, the others unchanged):

Operator APN Name Password

internet

virgin-internet

plus

internet

leave 'not set'

internet

leave 'not set'

internet

5. Calling the watch is impossible – busy signal or user unavailable:

* is topped upCheck whether the number you are calling from ,

* s blockedCheck that neither your number nor the number on the watch i

or restricted,

* Whitelist option is turned on if your number is notCheck whether the (

saved in the phone book and the Whitelist is on, the watch will reject

the call).

6. Calling f rom the watch is impossible:

* GSM signal icon – Check whether the watch has a ( ),

* meets all the requirementsCheck whether the SIM card (described at the

beginning of the manual).

* numeric keypad function is turned on that there areCheck that the or

contacts saved in the phone book of the watch.

7. During calls, you cannot hear the other person in the smartwatch

speaker:

* Check that the speaker on the watch (you can has not been muted adjust

the sound volume in the watch settings).

8. Short battery life:

* the watch charging time was not too shortCheck that (the

recommended charging time is ),approx. 2 hours

* Normal modeCheck the current operating mode on the device ( or

Battery saving mode are the recommended options).

- Phone: Numeric keypad function. Allows you to dial any number

( ) using the keypad and even outside the phonebook make a call -

button can be deactivated via the Garett . The Phone function

Tracker application Management>Numeric keypad under .

MAIN MENU

- Contacts: Phonebook function. View contacts previously saved via

the application. or Garett T racker Select a number from the list

click enter the number start a call terminate , to and . You can the

call by pressing or the . the red phone icon function button(7)

Incoming calls are with the and answered green phone icon

similarly rejected with the red function key or the . Activating the

numerical keypad clicking on during the call is possible by .

- Settings:

* Mobile networks: Conﬁgure network settings (VoLTE, APN, data

roaming),

* WiFi: WiFi settings,

* Bluetooth: Bluetooth settings (Bluetooth headphones can be

paired),

* Lock: Smartwatch lock settings,

* Volume: Adjust the volume of the watch (multimedia, alarm clock,

ringtone),

* Ringtone: Ringtone settings for notiﬁcations and incoming calls,

* Brightness: Adjusts the brightness level of the display,

* Torch: Torch function in the watch,

* Menu style: Change the style of the main menu,

* Theme: Change the theme (background) of the main menu,

* Sleep: Conﬁguration of screen blanking time (from 5 seconds to 30

minutes),

* Restart: Restart your watch,

* Turn off: Turn off the device,

* Tools: Additional functions for managing the device memory

(clearing and viewing data on the watch),

* More: Device information (water removal, device information, SIM

lock settings, date/time and language settings).

- SMS: SMS function. Allows you to send/receive SMS messages.

Tap , to start creating a . Enter your new message phone number

or and select a from the click previously saved contact Garett

Tracker application the ﬁrst ﬁeld second ﬁeld in . In the , enter the

content of the message you want to forward. Press the return

touch button(3) exit the keyboard view Click to when ﬁnished. ,

to send your message Messages sent/received will be available.

- Gallery: The watch's gallery function. Possibility of viewing, deleting

and sending photos. To delete, . To and press send, press hold the

photo, then give permission for the photo to be transferred. It will

appear in the Garett Tracker Remote Cameraapp under the tab.

- Learning:

* Game: A simple maths game.

* Timetable: GarettAbility to view a pre-conﬁgured timetable in the

Tracker app.

- Pedometer: Pedometer function. Displays the number of steps you

have taken. Option to enable/disable Garett this function in the

Tracker app under .Activity>Pedometer>Measurement

- App Store: Ability to install additional features on the watch.

- QR Code: REG CODE QR code to download theDisplays the and

Garett T racker app.

- Alarm: Possibility of viewing a pre-conﬁgured alarm clock in the

Garett Tracker app.

- Stopwatch: Stopwatch function.

- Lock:

* Screen lock: PIN code password Possibility of adding a or as a

screen lock. Enter your PIN/password repeat it conﬁrm, , and then

to add a new lock. The entered data will be required each time you

try to unlock your watch. This function protects against

unauthorised access to the smartwatch - Level I.

* FaceUnlock: Face unlock function + PIN/password. Enter the

PIN/password to activate the function repeat conﬁrm, and . Then

scan your face it appears automatically in the add face menu (

after entering and conﬁrming your PIN/password). Hold the

watch in according to the messages front of your face and move it

displayed on the smartwatch until the scanning is complete

( ). The image of the scanned face will be used to unlock the 100%

screen. This function protects against unauthorised access to the

smartwatch - Level II.

FaceUnlock enhanced can be with an additional feature -

EyeUnlock single eye blink It . It is an unlocking function using a .

prevents unlocking using e.g. a photo. To activate the feature, go to

FaceUnlock settings EyeUnlock no need to scan your and select (

face again). Once approved, unlocking the screen using your face

will only be possible after blinking your eyes. This function protects

against unauthorised access to the smartwatch - Level III.

- Music: Start/Stop NextMusic player function. Controlled: - , - ,

- . . Using , you can Back Press to display a list of all songs

perform the following actions:

* Share: Send a song to another device using a Bluetooth

connection,

* Set as ringer: Set the song as the incoming call sound,

* Delete: Deletes the selected song,

* Repeat: Loop playback of one or more songs,

* Random: Play all songs on the smartwatch randomly.

- Video: Watch video gallery function. Possibility of viewing deleting

and uploading videos. Select a video to . , to start playing Click

send to the watch administrator send via Bluetooth, click , to .

- Dictaphone: Voice recorder function. ,Press to start recording

then , to or .pause stop

- Camcorder: Camera function. Record video with the watch's built-in

camera. To , . The video will be saved in the start recording click

device gallery (Video).

- Thermometer: Thermometer function. Allows you to take

temperature measurements, and change the unit view recent

measurements Two modes. are available:

* Wrist: Start start Click to a quick measurement of your current

body temperature. When the , you will measurement is complete

hear a ; the result will be displayed on the watch screen (beep also

available under the History button Garett ) and saved in the

Tracker app under .Settings>Body Temperature

* Real-time measurement: Automatic continuous measurement

function. The temperature reading will change constantly

Step 4: In order to approve the changes, complete the APN conﬁguration by

clicking on the word in the left bottom corner and then on the Options

bottom panel on the icon.Save

4. Inaccurate GPS location:

* GPS signal icon – Check whether the watch has a ( ),

* if the watch loses GPS signal, e.g.The watch must be in an open area (

because it is inside a building, the location is determined based on the

nearest mobile network transmitter).

- 26 - - 27 -

TROUBLESHOOTING

1. The device does not turn on:

* Connect the device to a wall charger for ,approx. 2 hours

* are workingCheck whether the charging cable and charger ,

* is properly connectedCheck whether the device .

2. No GSM signal (icon – ):

* SIM card format is correctCheck whether the ,

* is inserted properly in the slotCheck whether the SIM card (as speciﬁed

at the beginning of the manual),

* SIM card meets all the requirementsCheck whether the (described at

the beginning of the manual).

* Turn the device off on again and ,

* Check whether the watch works .with another SIM card

3. No internet connection (no icon – or the following message in the

Garett T racker app: "The device is ofﬂine"):

* SIM card meets all the requirementsCheck whether the (described at

the beginning of the manual).

* APN conﬁgurationEnter the :

Send a from any mobile phone to the number on the watch text message

(the SIM card must be inserted and the watch must be on; the message

is case-sensitive):

Content of the ﬁrst text message:

pw,123456,ts#

After a while, you should receive a response to your phone containing

detailed information about the watch, i.e. the software version, ID, IMEI, IP

address and other information. For the watch to work properly, the ip_url

ﬁeld must contain:

ip_url:52.28.132.157; port:8001;

If the ip_url ﬁeld differs from the example provided, please

contact our Technical Support Department: serwis@garett.pl

WARRANTY/CLAIMS

The product is covered by a 24-month manufacturer's warranty. The warranty

does not cover: defects and damage caused by the user or as a result of

improper use (misuse), mechanical damage and damage resulting from

using accessories and/or consumables other than those provided with the

device. When lodging a complaint, ﬁll in the warranty card supplied with the

device and send the device accompanied with proof of purchase to the

address of the service centre provided on the warranty card.

Contact details are available on the website:

www.garett.eu

Manufacturer:

GARETT sp. z o.o.

Targowa 18/1413

25 - 520 Kielce

www.garett.eu

As indicated by the marking on the product or in the related content, the

device should not be disposed of with other household waste after the end of

its service life. To avoid harm to the environment and human health as a

result of uncontrolled waste disposal, please separate the product from other

types of waste and recycle responsibly in order to promote reuse of material

resources as a regular practice. For information about where and how to

recycle this product in a way that is safe for the environment, household users

should contact the retail outlet at which they purchased the product, or local

authorities. Business users should contact their supplier and check the terms

of the purchase agreement. Do not dispose of the product with other

commercial waste.

Proper disposal of the

product (waste electric

and electronic equipment)

Made in P.R.C.

v. 1/22

Find us on:

www.garett.eu

In the event of any problems with using the device, we encourage

you to visit the Technical Support section on our website (scan

the QR code/use the link) or contact the Technical Support

Department: serwis@garett.pl

https://garett.com.pl/pl/i/Pomoc-techniczna/145

Product specificaties

Merk:	Garett
Categorie:	Smartwatch
Model:	Kids Sun Pro 4G
Gewicht:	58 g
Breedte:	41 mm
Diepte:	41 mm
Gebruikershandleiding:	Ja
Internationale veiligheidscode (IP):	IP67
Ondersteunde mobiele besturingssystemen:	Android,iOS
Oplaadtijd:	2 uur
Capaciteit van de accu/batterij:	800 mAh
Bluetooth:	Ja
Beeldschermdiagonaal:	1.3 "
Resolutie:	240 x 240 Pixels
Touchscreen:	Ja
Processormodel:	8521E
RAM-capaciteit:	512 MB
SIM card type:	NanoSIM
2G standaarden:	GSM
Bluetooth-versie:	4.2
Generatie mobiel internet:	4G
GPS:	Ja
USB-poort:	Ja
Meegeleverde kabels:	USB
SMS:	Ja
Garantiekaart:	Ja
Markt positionering:	Smartwatch
Stopwatch:	Ja
Band materiaal:	Rubber
Ingebouwde luidsprekers:	Ja
Vorm:	Rechthoekig
Ingebouwde microfoon:	Ja
Levensduur accu/batterij:	48 uur
Display technologie:	IPS
Ingebouwde camera:	Ja
Meegeleverde software:	Garett Tracker
Band kleur:	Blauw
Stappenteller:	Ja
Wekker:	Ja
Backlight:	Ja
Standby tijd:	72 uur
Hartslag monitor:	Ja
Slaapkwaliteit:	Ja
Sms-meldingen:	Ja
Mobiele netwerkverbinding:	Ja
Muziekspeler:	Ja
Voorgesteld geslacht:	Man
Sluitingtype:	Bandgesp met enkele pin
Gesp kleur:	Grijs
Afneembare band:	Ja
Dikte:	15.7 mm
Vind mijn telefoon-functie:	Ja
GSM bands ondersteund:	850,900,1800,1900 MHz
Horlogekast kleur:	Blauw
Horlogekast grootte:	41 mm
Flash memory:	4 GB
Thermometer:	Ja
Band breedte:	20 mm
Ondersteunde talen:	ARA,CZE,DAN,DEU,DUT,ENG,ESP,FIN,GRE,HUN,ITA,JPN,KOR,LIT,POR,RUS,SLV,SWE,TUR,UKR,VIE
Ontworpen voor kinderen:	Ja
Oproepmeldingen:	Ja
Wifi:	Ja
Batterijtechnologie:	Lithium-Polymeer (LiPo)
Type beeldscherm:	Digitaal
SOS-waarschuwingsfunctie:	Ja
Bloeddrukmonitor:	Ja