Funai HT2-M200 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Funai HT2-M200 (60 pagina's) in de categorie Home cinema set. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/60
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
Home Theater System
HT2-M200
OWNER’S MANUAL
For Customer Use:
Carefully read the Model No. and Serial No. located at the back
of the unit and enter the information below. Retain this
information for future reference.
Model No. __________________________
Serial No. __________________________
E1T12ED_EN.book Page 1 Tuesday, August 3, 2010 5:13 PM
2EN
INTRODUCTION
This unit employs a laser. Only qualified service personnel
should remove the cover or attempt to service this unit,
due to the possibility of eye injury.
The power supply is connected and the unit is live when
the mains cable is plugged into a 220 - 240 V~, 50 Hz AC
outlet. To operate the unit, press [STANDBY/ON Q].
1 Do not attempt to open the cabinet. There are no
user serviceable parts inside. Refer all servicing to
qualified service personnel.
2 Slots and openings in the cabinet at the sides and
underneath are provided for ventilation. To ensure
reliable operation and to protect the unit from
overheating, these openings must not be blocked or
covered.
Avoid installation in enclosed spaces such as
bookcases unless suitable ventilation is provided.
3 Keep the unit away from radiators and other heat
sources.
4 Avoid use near strong magnetic fields.
5 Do not push objects of any kind into the unit through
the cabinet slots or openings as they could touch
electrically live parts or short circuit parts resulting in a
fire or electric shock.
6
To prevent fire or shock hazard, do not expose this
apparatus to dripping or splashing, no objects filled
with liquids, such as vases, should be placed on the
apparatus.
7 Do not stand the unit vertically. Use the unit in a
horizontal (flat) position only.
8 This product is in Stand-by mode when turned off
while the mains cable is connected.
To completely shut down the unit, you must
disconnect the mains cable.
9 Do not place any combustible objects on the device
(candles, etc.).
10 Before moving the unit, be sure to remove any discs
and unplug the mains cable from the AC outlet.
11 Disconnect the mains plug to switch off when the unit
becomes faulty or not in use.
12 The mains plug shall remain readily operable.
13 Read the manual instructions to ensure correct and
safe installation and interconnection of the unit in
multimedia systems.
14 This apparatus should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided. Make sure to leave a space of
20cm or more around this apparatus.
Safety Instructions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
The important note and rating are located on the rear or
bottom of the cabinet.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The symbol for CLASS II (Double Insulation)
Laser Safety
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: CLASS 2 LASER RADIATION WHEN OPEN
DO NOT STARE INTO THE BEAM
LOCATION: INSIDE, NEAR THE BD MECHANISM
Power Supply
WARNING: LIVE PARTS INSIDE.
DO NOT REMOVE ANY SCREWS.
Caution
E1T12ED_EN.book Page 2 Tuesday, August 3, 2010 5:13 PM
3EN
INTRODUCTION
INTRODUCTION CONNECTIONS PLAYBACK FUNCTION SETUP OTHERS
For safety and optimum performance of this unit:
• Install the unit in a horizontal and stable position.
• Keep the unit away from electronic equipment such as
an amplifier, TV, etc. to prevent warping, damage, fire
and malfunction.
• Do not place anything directly on top of the unit.
• Shield the unit from direct sunlight and keep away from
sources of intense heat. Avoid dusty or humid locations.
Avoid locations with insufficient ventilation for suitable
heat dissipation. Do not block the ventilation holes on
the sides of the unit. Avoid locations subject to strong
vibration or strong magnetic fields.
• Do not handle the mains cable with wet hands.
• Do not pull on the mains cable to disconnect it from the
AC outlet. Grasp it by the plug.
• If, by accident, water is spilled on the unit, unplug the
mains cable immediately and take the unit to an
authorized service centre for servicing.
Moisture condensation may occur inside the unit when it
is moved from a cold place to a warm place, after heating a
cold room, or under conditions of high humidity. Do not
use the unit for at least 2 hours to allow the inside to dry.
Unauthorised copying, broadcasting, public performance
and lending of discs are prohibited. This item incorporates
copy protection technology that is protected by U.S.
patents and other intellectual property rights of Rovi
Corporation. Reverse engineering and disassembly are
prohibited.
Consumers should note that not all high definition
television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In case
of picture problems with 480 or 576 progressive scan
output, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there are
questions regarding your TV set compatibility with this
480p or 576p product, please contact our customer service
centre.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and
can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
This product consists of materials which can be
recycled and reused if disassembled by a specialised
company.
Following information is only for EU-member
states:
The use of the symbol indicates that this product may
not be treated as household waste. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which
could otherwise be caused by
inappropriate waste handling of this
product. For more detailed information
about recycling of this product, please
contact your local city office, your
household waste disposal service or the
shop where you purchased the product.
Following information is only valid EU-member
States:
Disposal of batteries and/or accumulators
The crossed out wheeled dust bin symbol indicates that
batteries and/or accumulators must be collected and
disposed of separately from household waste.
If the
battery or accumulator contains more than the
specified values of lead (Pb), mercury (Hg), and/or
cadmium (Cd) defined in the Battery Directive (2006/
66/EC), then the chemical symbols for lead (Pb),
mercury (Hg) and/or cadmium (Cd) will appear below
the crossed out wheeled dust bin symbol. By
participating in separate collection of batteries, you will
help to assure the proper disposal of products and
batteries and thus help to prevent potential negative
consequences for the environment and
human health. For more detailed
information about the collection and
recycling programmes available in your
country, please contact your local city
office or the shop where you purchased
the product.
Make your contribution to the environment!!!
• Exhausted batteries do not belong in the
dustbin.
• You can dispose of them at a collection
point for exhausted batteries or special
waste.
• Contact your council for details.
Do not place the unit on the furniture that is capable of
being tilted by a child and an adult leaning, pulling,
standing or climbing on it. A falling unit can cause
serious injury or even death.
Pb, Hg, Cd
Installation Location
Avoid the Hazards of Electrical Shock and Fire
Moisture Condensation Warning
About Copyright
Notice for the Progressive Scan Outputs
E1T12ED_EN.book Page 3 Tuesday, August 3, 2010 5:13 PM


Product specificaties

Merk: Funai
Categorie: Home cinema set
Model: HT2-M200

Heb je hulp nodig?

Als je hulp nodig hebt met Funai HT2-M200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Home cinema set Funai

Funai

Funai HT2-M200 Handleiding

22 Augustus 2023

Handleiding Home cinema set

Nieuwste handleidingen voor Home cinema set

LG

LG DA-3620 Handleiding

22 November 2024
LG

LG F-DV25 Handleiding

22 November 2024
LG

LG LH-T360SE Handleiding

22 November 2024
LG

LG LH-T6740 Handleiding

22 November 2024
LG

LG LH-T760IA Handleiding

22 November 2024
Sony

Sony WS-FV10D Handleiding

22 November 2024
Sony

Sony WS-FV10DSC Handleiding

22 November 2024
Sony

Sony WS-FV10C Handleiding

22 November 2024
Sony

Sony WS-WV10C Handleiding

22 November 2024
Mitsai

Mitsai DV3630 Handleiding

17 November 2024