Fun Generation USB Mix 3 Handleiding

Fun Generation DJ Gear USB Mix 3

Lees hieronder de 📖 handleiding in het Nederlandse voor Fun Generation USB Mix 3 (16 pagina's) in de categorie DJ Gear. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/16
EHD9 eZ.HD Series 30
720p Analog High Denion True Day/Night
Outdoor IR Dome Vandal Camera
User’s Manual
Copyright © EverFocus Electronics Corp,
Release Date: Nov., 2014
2
Precauons
1. Do not install the camera near electric or magnec elds. Install the camera away from
TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the
electromagnetic elds generated from these devices may distort the video image or
otherwise interfere with camera operation.
2. Never disassemble the camera beyond the recommendaons in this manual nor introduce
materials other than those recommended herein. Improper disassembly or introducon of
corrosive materials may result in equipment failure or other damage.
3. Try to avoid facing the camera toward the sun. In some circumstances, direct sunlight may
cause permanent damage to the sensor and/or internal circuits, as well as creang
unbalanced illuminaon beyond the capability of the camera to compensate.
4. Keep the power cable away from water and other liquids and never touch the power cord
with wet hands. Touching a wet power cord with your hands or touching the power cord
with wet hands may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents. Oil, gas or solvents may
result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning. For cameras with interchangeable lenses, do not touch the surface of the sensor
directly with the hands. Use lens ssue or a cotton pped applicator and ethanol to clean
the sensor and the camera lens. Use a damp soft cloth to remove any dirt from the camera
body. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any
part of the camera.
7. Do not operate the camera beyond the specied temperature, humidity or power source
rangs. This camera is suitable for indoor operaon only. Use the camera at temperatures
within -40°C~50 (- °F~1 °F) and humidity between 20%~ 80%; this device is not rated °C 40 22
as submersible. The input power source is 12VDC or 24VAC. Be sure to connect the proper +
/ - polarity and voltage, as incorrect polarity or too high a voltage will likely cause the
camera to fail, and such damage is not covered by the warranty.
8. Mounng. Use care in selecng a solid mounng surface which will support the weight of
the camera plus any wind, snow, ice or other loading, and securely aach the camera to the
mounng surface using screws and anchors which will properly support the camera. If
necessary (e.g. when mounng to drop ceilings) use a safety wire to provide addional
support for the camera.
3
Safety Noce
Federal Communicaon Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio communicaons. However, there is no
guarantee that interference will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television recepon, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Cauon: Any changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two
condions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operaon.

Product specificaties

Merk: Fun Generation
Categorie: DJ Gear
Model: USB Mix 3

Heb je hulp nodig?

Als je hulp nodig hebt met Fun Generation USB Mix 3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding DJ Gear Fun Generation

Fun Generation

Fun Generation USB Mix 2 Handleiding

2 Juli 2023
Fun Generation

Fun Generation USB Mix 4 Handleiding

28 Juni 2023
Fun Generation

Fun Generation USB Mix 3 Handleiding

24 Juni 2023

Handleiding DJ Gear

Nieuwste handleidingen voor DJ Gear

Vonyx

Vonyx DB10 Handleiding

4 December 2024
Vonyx

Vonyx DB20 Handleiding

4 December 2024
Korg

Korg PuttRhythm Handleiding

2 December 2024
Korg

Korg Rhythm Master Handleiding

2 December 2024
Vonyx

Vonyx DJP170 Handleiding

30 November 2024
Denon DJ

Denon DJ Prime GO Handleiding

29 November 2024
Denon DJ

Denon DJ LC6000 Prime Handleiding

29 November 2024
BeamZ

BeamZ Fingers 7 Handleiding

21 November 2024
BeamZ

BeamZ StrobeMoon Handleiding

21 November 2024
Flexson

Flexson VinylPlay Handleiding

17 November 2024