FTE Maximal MAX S402PVR Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor FTE Maximal MAX S402PVR (46 pagina's) in de categorie Digitale ontvanger. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/46
MAX S402PVR
PAG. 2
rev 1.2
The lightning ļ¬‚ ash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user
to ā€œdangerous voltageā€
and to prevent from a
risk of electric shock.
Warning:
To reduce the risk of electric shock,
donā€™t open the cabinet. Refer servicing
to qualiļ¬ ed personnel only.
The exclamation point
within an equilateral
triangle is intended
to alert the user to
important operating and
maintenance (servicing).
Please read the manual carefully before installing the receiver.
Caution: Never open the device by yourself. Dangerously high voltages are present inside the unit. Refer
servicing to qualiļ¬ ed staff only.
When installing the receiver, always unplug the receiver from the mains voltage.
Unplug the receiver from the mains in case of long periods without operating the receiver (for example,
during holidays!).
To prevent shock hazard, do not touch the power plug with wet hands.
Always unplug the receiver before cleaning it or working on the connections.
Do not install the receiver close to strong heat sources, and ensure a good aeration if you plan to install
the receiver in a small cabinet.
Before you start operating the receiver, make sure that the satellite antenna is properly built up, optimally
connected and aligned.
The correct place to install the receiver is, of course, near your TV set and any other A/V signal sources
(DVD, VCR, CD, game console, etc.).
Choose a stable support, in which you can easily lay the necessary connecting cables without stumbling-
danger.
The receiver should be installed near an easily accessible outlet.
Do not install the receiver in a place where it can be reached by liquid spills.
Do not put any heavy objects as, for example, a TV-device over the receiver; the receiver could be
damaged.
DO NOT INSTALL THE RECEIVER:
- On an unstable surface
- Subject to direct sunlight
- In high humidity environment
- Outside the receiverā€™s temperature range (+5Ā°...+40Ā°C)
If the receiver is subject to severe temperature changes, it can suffer from water condensation inside.
Switch off the receiver in these cases for at least 2 hours before resuming operation.
SAFETY PRECAUTION
ENGLISH
PAG. 3
rev 1.2
Example 1 ā€“ Basic System
Example 2 ā€“ DISEqC switches
Example 3 ā€“ Combined with terrestrial Example 4 ā€“ Motorized system
QUICK INSTALLATION GUIDE
FOLLOW NEXT STEPS FOR THE CORRECT INSTALLATION OF THIS RECEIVER.
STEP 1: CONNECTIONS
The coaxial cable, with satellite signal, must be connected to the ā€œIF INā€ connector. The ā€œTV SCARTā€
connector must be connector to the TV set.
The receiver also includes an UHF modulator, allowing connecting a TV set or VCR. However the pictu-
re quality will be a little poorer. The modulator has an antenna input and the output range is from chan-
nel 21 to 69. This will allow you to mix the existing antenna signals with the output channel generated
by the receiver.
The modulator output is factory preset to channel 38. You can change the output channel in the TV sys-
tem menu that you can ļ¬ nd in System Setup menu.
You will also have to tune your TV set accordingly, in order to receive the picture from the receiver.
Depending on the type of installation, the receiver should be connected and conļ¬ gured following next
examples.
QUICK INSTALLATION GUIDE
ENGLISH


Product specificaties

Merk: FTE Maximal
Categorie: Digitale ontvanger
Model: MAX S402PVR

Heb je hulp nodig?

Als je hulp nodig hebt met FTE Maximal MAX S402PVR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Digitale ontvanger FTE Maximal

Handleiding Digitale ontvanger

Nieuwste handleidingen voor Digitale ontvanger