Frigidaire IMKTTM0018 Handleiding

Frigidaire Niet gecategoriseerd IMKTTM0018

Lees hieronder de 📖 handleiding in het Nederlandse voor Frigidaire IMKTTM0018 (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/7
AUTOMATIC ICE MAKER
INSTALLATION INSTRUCTIONS
P/N: A23224101
WARNING
• To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator
from electrical power before connecting a water supply line to the refrigerator.
• Connect the ice maker to a potable water supply only.
An authorized service technician is recommended to install the ice maker kit.
Ice Maker (IMKTTM0018) Kit Components
5304520536
Ice Maker
QTY: 1
5304525288
Shoulder Screw
QTY: 5
5304520538/5304520539
Cover with Door
QTY: 1
5304520535
Ice Bin
QTY: 1
Parts needed for install inside the unit
Tools Needed:
• Flat head screw driver • Phillips or Quadrex driver
• ¼" Hex driver • Gloves
• Drill • Needle nose pliers
Parts needed for install on back side of the unit
NOTE
Check with your local building authority for recommendations on water lines and associated materials prior
to installing your new refrigerator. For household water line hookup from the home water supply system to
the unit, we recommend for homes with existing valves Smart Choice® water line kit 5304437642 (with a 6'
Stainless Steel Water Line) and for homes without an existing valve, we recommend Smart Choice® water
line kit 5304493869 (with a 6' Polyline Waterline). Please refer to Frigidaire.com for more information.
5304520540
Water Valve
QTY: 1
218976923
Tube
QTY: 1
241500304
#8 screw
QTY: 2
5304455846
Clamp " ¼
QTY: 1
5303001193
Clamp "½
QTY: 1
A22628901
Fill Tube
QTY: 1
A23297701
Screw
QTY: 2
A23221901
Foam Pad
QTY: 1
A23222001
Foam
Rectangle
QTY: 1
Fill Tube Kit
A23489801/2107000021
2
Ice Maker Installation Instructions
1. Unplug refrigerator from electrical outlet.
2. Lift the freezer shelf up and out. Set aside.
See Figure 1.
3. Remove water inlet and electrical cover, located
on the inside of the unit, by inserting a flathead
screwdriver on right side of opening in the small
cover. Push to the left to disengage the snap.
See Figure 2
4. Locate dimples in the freezer liner for screw
placement (a flashlight may help). Align the
shoulder screws with the dimples. Push the
screws to penetrate the freezer liner and drive the
screws in until they are tight against the liner. Use
2 screws on the left side wall, and 3 on the top of
the liner. See Figure 3.
5. Insert the ice maker connector and wire through
the hole in the middle of the water inlet and
electrical cover. See Figure 4.
Slide the ice maker onto the 2 side wall shoulder
screws. The ice maker will snap into place.
See Figure 6.
6. Plug the ice maker in the electrical connector
on the back wall. Then install the water inlet and
electrical cover back in position by inserting the
tab on the left side into the slot and push in the
right side to make the snap engage. See Figure 5.
Figure 1
Figure 2
To Ceiling
To Wall
Install 5
Shoulder
Screws
Figure 3
Figure 4
Align Water
Inlet
Plug
Electrical
Connector
Figure 5
Figure 6
3
Ice Maker Installation Instructions
8. Locate the Ice maker installation label on the
rear outside right top corner of the refrigerator.
Cut the label on the dashed lines, and push flaps
inward until they stick to the unit. See Figure 9.
Align the fill tube key to the slot. Insert the fill
tube with foam pads. Drive the 2 screws to fix the
fill tube against the refrigerator. See Figure 10.
7. Remove the silicone paper on the foam pads.
Stick the ring shaped foam pad to the fill tube.
See Figure 7.
Make sure the end of water fill tube sits within the
water channel of the ice maker. See Figure 11.
9. Slide the ice maker cover onto the shoulder
screws on top of the unit until it locks into place
with a snap. See Figure 12.
Wrap the rectangular foam pad around the fill
tube. See Figure 8.
Figure 7
Figure 8
Cut on dashed lines
and push in on flaps
Figure 9
Figure 10
Figure 12
Figure 11

Product specificaties

Merk: Frigidaire
Categorie: Niet gecategoriseerd
Model: IMKTTM0018

Heb je hulp nodig?

Als je hulp nodig hebt met Frigidaire IMKTTM0018 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Frigidaire

Frigidaire

Frigidaire FDHP4336AS Handleiding

2 November 2024
Frigidaire

Frigidaire GDPH4525AF Handleiding

26 Juli 2024
Frigidaire

Frigidaire FDSR4501AP Handleiding

25 Maart 2024
Frigidaire

Frigidaire 11NBSTGSDS Handleiding

26 Juli 2023
Frigidaire

Frigidaire 11NBRRFLDS Handleiding

13 Juni 2023
Frigidaire

Frigidaire MWTK30K Handleiding

3 Juni 2023
Frigidaire

Frigidaire 11NBBKGDSS Handleiding

2 Juni 2023
Frigidaire

Frigidaire 11NBSTELDS Handleiding

2 Juni 2023
Frigidaire

Frigidaire MWBOK15TB Handleiding

30 Mei 2023
Frigidaire

Frigidaire FCRS181RQ Handleiding

21 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024