Fredenstein Artistic Compressor Handleiding

Fredenstein Processor Artistic Compressor

Lees hieronder de 📖 handleiding in het Nederlandse voor Fredenstein Artistic Compressor (5 pagina's) in de categorie Processor. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Artistic
Compressor
Operating Manual
Fredenstein Artistic Compressor
The Artistic Compressor is a single channel FET compressor with multi-channel link capability in
the 500 series form factor.
The compressor features rotary controls for Input Gain, Release Time, Compression Ratio, Make-up
Gain and Wet-Dry Mixing (parallel compression). The Attack Time can be set in three steps, as
well as the side-chain low cut filter. The LED bar-graph meter indicates the gain reduction in the
range of 1dB to 16dB. It's punchy and detailed sound is generated by three major components:
1) Fredenstein's proprietary Reverse-Mancini FET architecture
2) our advanced OPA2 discrete Audio Operational Amplifier
3) the American made vintage style steel core output transformer
As all Fredenstein products, the Artistic Comp is designed by a German-American team and
manufactured in Taiwan.
Installation:
Please power down your rack or box first, before inserting the Artistic Compressor. Since the
Artistic Comp uses the link interconnect in the box or rack, it cannot coexist with any other third-
party modules using the same link interconnect (PIN 6 on the edge connector). If you are using a
Fredenstein Bento box, please turn off the compressor link switches to any third party module(s),
only turn on the link switches between Artistic Comp modules.
Other third party equipment not using the link interconnect, such as most Mic-Pres and EQs etc,
can be used simultaneously with the Artistic Comp in any enclosure. The power requirements are
very light at maximum of +/-16V, +/-75mA and should not overload any enclosure.
Fredenstein Artistic Compressor Manual V1.1 Aug. 27, 2015 Page 1
Fredenstein Artistic Compressor
Rotary Controls:
INPUT : Sets the line level gain in the
range of -10 dB to +20 dB
RAT : Sets the compression ratio in the
range of 2:1 to 20:1
REL : Sets the release time of the
compressor from 70ms to 2.5s
OUTPUT : Make-up gain control in the
range of 0 dB to +20 dB
MIX : Output Mixer between the
compressed (wet) and
uncompressed (dry) signals
Switches:
SC Filter : Selects the low cut filter in the
side-chain.
lower position: off
middle position: 300Hz
upper position: 150Hz
LINK : Multi-channel synchronization
for two or more Artistic comp
modules. All channels will have
identical gain reduction to avoid
shifts in the balance
ATT : Compressor Attack Time
lower position: 0.5 ms
middle position: 25 ms
upper position: 5 ms
ON/BYP : in upper ON position, the
compressor is active, in the lower
BYP (BYPASS) position or if the
rack is powered down, a relay
connects the output directly to
the input, the gain reduction
meter will still show the depth
of compression
Indicators:
CLIP LED : Lit when the output level reaches
+24dBu (2db before clipping)
GR (Gain Reduction) : Shows actual gain reduction in
the range of 1db to 8db in one db
steps and 2dB for 8dB to 16dB
Fredenstein Artistic Compressor Manual V1.1 Aug. 27, 2015 Page 2


Product specificaties

Merk: Fredenstein
Categorie: Processor
Model: Artistic Compressor

Heb je hulp nodig?

Als je hulp nodig hebt met Fredenstein Artistic Compressor stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Processor Fredenstein

Handleiding Processor

Nieuwste handleidingen voor Processor