Foscam V8P Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Foscam V8P (2 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
V1.0
305503000999
Quick GuideSetup
Outdoor Security Camera Package Contents
Setting Up Your Foscam
Security Camera
Network Cable
1
Getting Started
WiFi Connection
1. Please tighten the antenna clockwise and make sure it is in a
vertical position.
To view this guide in other languages (e.g. Nederlands, Deutsch,
Français, Español), and for detailed manuals, tools, etc., please
visit .foscam.com/downloads
3
Setting Up Your Camera:
the Connection via Foscam
App (Recommended)
To ensure a smoother video experience on your smart phone, it is
recommended that your smart phone meet the following
specications:
iOS: version 11 or higher.
Android: 5.0 or higher, using a device with a Graphics
Processing Unit (GPU).
Before You Get Started
Scan the QR code below to download and install the Foscam APP.
Note: For the best experience, please update the APP to the
latest version!
5. Follow the steps below:
Scan QR Code
Mod el: XXX
FCC I D:XXXXX
IC:12558A-XX
S/N:FIAI 1403000001
UI D:XXXXXXXXXXX
FH D Wi re le s s I P C am e ra
4
Please scan the QR code located
on your device
My Device
Foscam_camera
Camera Login
New camera username
Re-enter new camera
password
New camera password
Submit
11
10
Please do not exit this app or
turn off the device during this
process(requires approximately
2 minutes to complete)
Add Camera
<
20%
Garden
Foscam_camera
12
Note: If the adding process
fails, please reset your camera
and try adding again according
to the above method.
Mo de l: XXX
FCC ID:XXXXX
IC:12558A-XX
S/N:FIAI1403000001
UID:XXXXXXXXXXX
FHD Wire le s s IP Ca me ra
Scan QR Code
Mo d el: XXX
FCC ID:XXXXX
IC:12558A-XX
S / N: F IAI1403000001
UID: XXXXXXXXXXX
FHD Wireless IP C amera
Please scan the QR code located
on your device
Waterproof Lid
2. Plug the power adapter into the camera, and please wait for a
few seconds until hearing the “Ready for WiFi conguration”
3. Make sure that your smartphone is connected to your WiFi
router and turn on the system Bluetooth.
6
Wi-Fi configuration
Keep the device and mobile
phone close tothe router.
XXXXX_5G
WiFi Password
Conrm
Save
Set name
Garden
Room
D
Please set the device name:
Doorway Corridor
G age
Kitchen
Balcony Bed Room
Garden
Save the body QR code
Save t he device‘s QR code t o the mobile s yst em album
to help y ou re-add the device more conveniently
9
8
4. Open the foscam APP and please register a Foscam account, or
sign in if you have one already.
Email address
Password
Sign Up
Forgot Password
Sign In
Accept Privacy Notices and Terms of Seervice
Next
Add Device
5
Power the device on until
the device voice prompts
"Hello foscam"
I have heard“Hello Foscam"
Tap to add a device
Add Device
<
Scan the QR code
Search in L
Manually add
My Device
1 3
Add Cameras
Add NVR/NVR kits
Add Device
2
Searching for nearby
Bluetoot devices...
Searching for Bluetooth
7
2 Physical Description
Microphone
Lens
Spotlight &
Light Sensor
Infrared LED
Spotlight &
Infrared LED
Speaker
LAN Power
Micro SD Card Slot
Reset
The cords on this product are
a potential strangulation
hazard. For child safety,
please keep these cords out
of the reach of children.
Antenna
Tighten
clockwise
IP Camera
Expansion Screws
Wi-Fi Antenna
Drill Hole Position Template
Screw holes for installing camera
Mounting Template Quick Setup Guide
Power Adapter
Quick Setup Guide
Ou td oo r FH D Secu ri ty Cam e ra
Reset
Security Tips
Please change the camera's password regularly, using a
combination of numbers, letters and special characters.
We recommend that you regularly update your camera with
the latest available software and rmware to ensure the best
experience with your camera.
Note: Before connecting the camera via Bluetooth, ensure that
the system's Bluetooth is turned on.
WiFi
WLAN
WLAN
xxxxx_2.4G
xxxxx_5G
Settings
MY NETWO RKS
2.4 GHz
5 GHz
Tips: If you didn’t hear the voice prompt, press and hold reset for
about 3~5 seconds to reset the camera.
Bluetooth
5 Hardware Installation
. 264
. 264
Point the camera at the desired location and use the screws
provided to mount it.
Please Note:
Ensure that rain or water will not reach the connector ports at the
end of the tailcable. These connectors are not weather-resistant.
WLAN frequency range: 2412MHz - 2472MHz and
5725MHz - 5850MHz
Bluetooth Frequency Range: 2400-2483.5MHz
Maximum transmission power: < 18dBm
Wireless Standard: IEEE802.11b/g/n (2.4GHz)
IEEE802.11a/n/ac (5GHz)
Power Supply: DC 12V 1.0A 12W
7 Product Performance
wizard to add your camera.
Please visit foscam.com/downloads to view the user manual
and for additional detailed steps.
6 Important Notice
Camera Username & Password
The camera username & password are used to access and
manage your camera. Having a strong password can
signicantly improve the security of your camera.
If you have forgotten either of them, please press the "Reset"
button.
Press and hold the "Reset"
button for 3-5 seconds until
hearing "reset succeed".
Storage Media
Your camera supports cloud, NVR (Network Video Recorder),
and Micro SD card (supports FAT32 and exFAT format)
storage formats.
cloud Storage NVR Micro SD card
(FAT32 & exFAT)
. 264. 264
2 3
How to format Micro SD card, please follow the steps
below:
Scan the QR code below
to download the
“FoscamFormat ” Tool
4
Open the
“FoscamFormat ” Tool
5
FoscamFormat
foscam.com/downloads/app_software.html
Foscam Format ×
Choose the SD card:
Accept Terms of us
Terms of use
Format
2019 (c) Euport BV
F:\
1
2
3
3
6
ALL data on disk: I: will
be erased, are you sure?
Conrm Cancel
Warning
7
1
9
Computer
Format ready
OK
Foscam Format
×
8
10 11
Safety Tips
Prohibit use at
high temperature
Keep away
from re
Not a
children's toy
Caution Electricity
Prohibit use at
low temperature
Keep away
from children
Keep dry
Use the supplied
screw pack
support@foscam.com
4 PC Access Your Camera
Foscam VMS
Foscam VMS is a new tool for PCs. It does not require plug-ins
and is compatible with Windows & Mac, supporting all Foscam
HD cameras and up to 36 cameras at the same time. If you would
like to manage multiple cameras, we suggest you install Foscam
VMS. You can download the “Foscam VMS ” Windows version
from , and can download the "Foscam VMS" foscam.com/vms
Mac version from the APP store:
https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12
Note: For the best experience, please update Foscam VMS to the
latest version!
Add the IP Camera
1. Run Foscam VMS, then create a local administrator account
and login.
2. Tap the "+" icon on the Foscam VMS and follow the setup
8 Troubleshooting
IP cameras is not powering on
If you nd your camera is not powering on, please the following:
1. Please check whether the outlet is working properly or not.
Try to plug the camera into a dierent outlet and see whether
it will work.
2. Please check whether the DC adapter is working or not. If you
have another 12V/1A power adapter which is working, please
try with another power adapter and see whether it will work.
3. If it still won’t work, please contact Foscam support.
1. Please connect the camera to your router with an ethernet
cable. If you can see the camera live video on the Foscam app,
please go to camera settings-->WiFi settings to choose the new
WiFi name and input WiFi password to set up. After the WiFi
settings is completed, please disconnect the ethernet cable
from the camera and wait for some seconds to connect to the
camera.
2. There is a need to reset the camera rst. Please refer to
https://www.foscam.com/faqs/view.html?id=13 to see the
reset steps.
Then please open the Foscam app to scan the QR-code of your
camera to set up the wireless connection for the camera. Please
make sure your cellphone is connected to that new WiFi.
How to re-congure the WiFi connection for Foscam
cameras after router changed?
FAQS Foscam APP
CE Certificate statement Website:
https://www.foscam.com/company/ce-certificate.html
Exporter and Importer Information Opened to Public:
https://www.foscam.com/company/open-information.html
www.foscam.com
Due to product upgrades and other reasons, this guide may be
slow to update, resulting in slight inconsistencies with the ocial
website information. Please take the ocial website
(www.foscam.com) information as the current standard.
Manufacturer: Shenzhen Foscam Intelligent Technology
Co., Ltd
Addr: Room 902, Building 1B, Shenzhen International
Innovation Valley, Xingke 1st Street, Nanshan District,
Shenzhen, Guangdong, China, 518055
Facebook
Use the correct
power supply
Reset
0~90°
0~360°
0~360°
0~90°
0~360°
0~360°


Product specificaties

Merk: Foscam
Categorie: Bewakingscamera
Model: V8P

Heb je hulp nodig?

Als je hulp nodig hebt met Foscam V8P stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Foscam

Foscam

Foscam R8M Handleiding

10 December 2024
Foscam

Foscam PD5 Handleiding

9 December 2024
Foscam

Foscam SD8P Handleiding

4 December 2024
Foscam

Foscam V8P Handleiding

10 Juni 2024
Foscam

Foscam SD4H Handleiding

12 Maart 2024
Foscam

Foscam C5M Handleiding

10 Januari 2024
Foscam

Foscam V5P Handleiding

18 Augustus 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera