Foscam F41 Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Foscam F41 (82 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/82
User
User Manual
Manual
Wi-Fi Floodlight Security Camera
Model: FLC/F41
V1.0
Table of Contents
Security Warning................................................................................................................................................................... 1
1 Overview............................................................................................................................................................................. 2
1.1 Key Features...........................................................................................................................................................2
1.2 Read before Use.................................................................................................................................................... 3
1.3 Packing Contents...................................................................................................................................................3
1.4 Physical Description.............................................................................................................................................. 3
1.5 SD Card Management...........................................................................................................................................4
1.6 Add Device: Connection via the Foscam App...................................................................................................5
1.7 Installation............................................................................................................................................................... 8
2 Access the IP Camera in Foscam App.......................................................................................................................... 9
2.1 Foscam APP Surveillance Window.....................................................................................................................9
2. 2 Watch Live........................................................................................................................................................... 10
2.3 Camera Setting.................................................................................................................................................... 15
3 Surveillance Software Foscam VMS........................................................................................................................... 25
3.1 Hardware Connection & Software Installation................................................................................................ 25
3.2 Create Account..................................................................................................................................................... 25
3.3 Add Device............................................................................................................................................................ 26
3.4 Surveillance Software GUI................................................................................................................................. 34
3.5 Advanced Camera Settings................................................................................................................................38
4 Appendix........................................................................................................................................................................... 70
4.1 Frequently Asked Questions..............................................................................................................................70
4.2 Default Parameters..............................................................................................................................................74
4.3 Specification..........................................................................................................................................................74
4.4 CE & FCC..............................................................................................................................................................75
4.5 WARRANTY......................................................................................................................................................... 76
4.6 Statement.............................................................................................................................................................. 78
5 Obtaining Technical Support......................................................................................................................................... 80
1
Security Warning
ļ¬Please change the password of your doorbell regularly, using a combination of numbers, letters and
special characters.
ļ¬We recommend that you regularly update your doorbell to the latest available software and firmware
versions to help ensure the best experience for your floodlight camera.
ļ¬All electrical connections and wiring of this product must be carried out by a licensed electrician
in accordance with local and national wiring rules (e.g., AS/NZS 3000 Electrical Installations).
Check with local authorities for applicable requirements.
ļ¬The product must be mounted on a flat vertical surface capable of supporting the full weight of the
product.
ļ¬Ensure the voltage marked on the product is the same as the electrical power supply to be used.
ļ¬Do not connect to a dimmer switch or timer.
ļ¬Always turn off electricity at the main circuit breaker or fuse box before installation. Failing to do so
could result in serious injury, electrical shock, and/or risk of fire.
ļ¬Do not rely on wall switch alone to turn off the power.
ļ¬Do not open or disassemble the product. There are no user-serviceable parts inside.
2
1 Overview
Welcome to use our product, Floodlight Camera. Foscam Floodlight Camera is an integrated IP Camera with a
color CMOS sensor enabling viewing in High Definition resolution.It combines a high quality digital video
camera, with a powerful free Foscam Video Management Software to bring clear video to your desktop fromļ¼Œ
anywhere on your network or over the APP.
It supports P2P function. Thanks to the P2P easy access technology, you don t need to do complicated Portā€™
Forwarding and DDNS settings, you just need to scan the QR code on the side of the camera to connect it on
smart phone, or input the UID on CMS software to realize remote access.
The Floodlight supports the industry-standard H.264+ compression technology, drastically reducing file sizes
and conserving valuable network bandwidth.
The Spotlight Camera adds the bright motion-triggered LED spotlight to the IP cameras, which allows for color
night vision and powerful deterrent effect for criminals. Loading with smart features like PIR and motion
detection and siren, this outdoor spotlight cam gives you one-of-a-kind protection.
1.1 Key Features
ļµ4Megapixels Resolution
ļµSupports WPA and WPA2 Encryption
ļµSupport full duplex real-time 2-way Audio
ļµFloodlight brightness up to 2600lum
ļµSupports Human detection&PIR detection
ļµWide Angle lens, diagonal Angle up to 156Ā°
ļµP2P Feature for Easy Remote Access
ļµSupport 2.4GHz&5GHz dual-band WiFi
ļµSupports image snapshot
ļµSupports dual-stream
ļµBuilt-in IR LED, has excellent night vision image
ļµSupports remote viewing & record from anywhere anytime
ļµMulti-level users management with password protection
ļµSupports multiple network protocols: IP TCP UDP FTP DHCP RTSP态 态 态 态 态
ļµProviding Video Management Software to manage or monitor multi-cameras
ļµSupports sound detection
ļµSupports Alexa
ļµSupports Google Assistant
ļµSupports 128G Micro SD Card Storage(External) and Cloud storage
3
1.2 Read before Use
Please first verify that all contents received are complete according to the Package Contents listed below.
Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Setup
Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly
as intended.
1.3 Packing Contents
ā— Floodlight CameraƗ 1
ā— Junction Box Ɨ 1
ā— Foam Gasket Ɨ 1
ā— Expansion ScrewsƗ 1
ā— Quick Setup Guide Ɨ 1
ā— Power Adapter Ɨ 1
ā— Installation HookƗ 1
1.4 Physical Description
Junction Boxļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šUsed with floodlight camera wiring
4
Foam Gasketļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šPost it behind the floodlight camera
Locking Nutļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šAdjust the horizontal direction of the Floodlight.
Adjustment Knobļ¼šAdjust the direction of the floodlight vertically.
Floodlightļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼š Floodlight brightness up to 2600lum.
Washerļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šLock the floodlight camera with screws.
Screwļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šLock the camera.
Capļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šAfter the screw is installed, it is used to plug the screw hole.
Locking Collarļ¼šAdjust camera angle.
Microphone: Built-in Microphone.
Lens: Fixed focus lens.
LED Indicatorļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šInfrared LED for night vision.
Passive Infrared motion sensorļ¼šThe Passive Infrared motion sensor is electronic devices which are used in
some security alarm systems to detect motion of an infrared emitting source, usually a human body.
Reset: Press and hold on the reset button for 10 seconds. Releasing the reset button, the password will back
to the factory default administrator password.
Micro SD Card slot: Supports up to 128GB SD card for storing the video.
Speaker: Built-in speaker
NOTE: There are up to two labels located at the bottom of the camera, this is an important feature of original
Foscam cameras. If your camera does not have labels, it may be a clone. Cloned Foscam cameras can not
use original firmware and are not eligible for warranty or technical services.
1.5 SD Card Management
The record files of the IP camera can be stored in the Micro SD Card.
This camera supports Micro SD Card and the max size of Micro SD card must be under 128G.
You need open the silicone plug, then plug the Micro SD card into Micro SD card slot inside the IP camera.
When you plug in the Micro SD card during the camera work process, please reboot the camera again, or else
5
the Micro SD Card may be cannot work well.When you re-install the cover, please ensure the tightness with
the camera.
Warning: After installing the Micro SD card, please cover the silicone plug in time to prevent water or steam
from falling into the device, causing damage or lens fog.
1.6 Add Device: Connection via the Foscam App
Scan the QR code below to download and install the Foscam APP.
To ensure a smoother video experience on your smart phone, it is recommended that your smart phone meet
the following specifications:
iOS: version 11 or higher.
Android: 4.1 or higher, using a device with a Graphics Processing Unit (GPU).
Note: For the best experience, please update the APP to the latest version!
1.6.1 WiFi Connection via the Foscam App
Please refer to the .Quick Setup Guide
6
1.6.2 Wired Connection via the Foscam App
1. Connect the camera to your router with an Ethernet cable.
Tips: If you didn t hear the voice prompt, press and hold reset for about 10 seconds to reset the camera.ā€™
2. Plug the power adapter into the camera, and then please wait for a few seconds until you hear Readyā€œ
for WiFi configuration .ā€
3. Make sure that your smart phone is connected to your WiFi router.
4. Open the foscam APP and please sign up for a Foscam account, or sign in if you have one already.
5. After logging into Foscam APP, select ā€œTap to add a cameraā€ or "+" icon on the upper right corner, then select
"Scan the QR code" and scan the QR code that labeled at the bottom of your camera.
6. There are two setup methods available that you can choose from, so please pay attention carefully and
follow either Method A or Method B.
Method A: Please wait for a few seconds, you can tap "Configure WiFi" in "Configure WiFi" interface, then
select your WiFi network and enter your WiFi's password. After, you can set the camera name and tap
ā€œSaveā€ in the "Set name" interface.
7
1. It is strongly recommended that you choose to configure WiFi at this step.Note:
Method B: Please wait for a few seconds, you can tap "Configure WiFi" in "Configure WiFi" interface, then you
tap "Skip" in the "WiFi Settings" interface. After, you can set the camera name and tap Save in the "Setā€œ ā€
name" interface.
Note: If the adding process fails, please reset your camera and try adding again according to the above
method.
8
8. After completing the above steps, you can begin install your camera.
Note: If you choose installation Method B, please refer to the following steps for configuring WiFi . After
setting your WIFi, you can unplug your network cable and the camera will work normally.
Configure WiFi
If you selected "Skip" in step 6, click play to enter the camera credentials interface > Tap the ā€œ ā€ button >
tap ā€œWiFi Settingsā€ > select your WiFi network and enter your WiFiā€™s password. After setting up successfully,
you can view live video without the Ethernet cable.
1.7 Installation
Please refer to the .Quick Setup Guide
Note: Make sure you have installed the Foscam App, and have scanned the camera QR code and
completed the "add device" process in the app before beginning the hardware installation process.
9
2 Access the IP Camera in Foscam App
After setting up your Doorbell in the app, select it this will bring you to the Device Dashboard,
where you can change settings and access various features.
2.1 Foscam APP Surveillance Window
Please refer to the if you install the camera for the first time. You can start to learn about softwaresection 1.6
operation after finish quick installation.When you launch the Foscam App, the devices page displays.
Camera Name: A camera name which is displayed in the Foscam Cloud Service.
You can rename your cameraā€™s name by tap Live > Camera Settings > Camera Info .
OSD: Including camera name and camera time, camera name can not be renamed but camera time can be in
synchronized with the phone.
Sync Time: Tap .Live > Camera Settings > Sync Time
Menu
Camera Name
Camera Date&Time
Cloud Service
More
Watch Live
Add Device
Face service
Share
10
Camera Date&Time: You can Sync Time, tap Live > Camera Settings > Advanced
Settings >Sync Time.
Share: You can share the camera with your family or other users to watch, tap Live > Camera Settings
> Share Camera > Family or Invite.
Cloud Service: Foscam Clound can save every alarm detection videos in ht cloud, and you can review every
event anywhere, any time.
More: Click the button to enter the more options page of the camera, Album, Alarm Settings, Playback,
Notification, Settings, Siren and Spotlight.
Add Device: Please refer to the Quick Setup Guide.
Split Screen: Click button, you can watch the live interface of 4 devices.
2. 2 Watch Live
Tap to view and listen to a live videoLive
11
Back: To stop viewing and listening to the live feed, tap the Back.
Resolution: There are three types to identify different streams you have set. If select the QHD Mode, the
clearer video will become, and it will take up more bandwidth; If select the HD Mode, the video will not be as
clear as QHD Mode, and it will take up less bandwidth. The FHD Model is a value between FHD Mode and SD
Mode.
Resolution: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate
configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate
is large, that will lead to video can not play well.
On this screen, you can listen to a live stream, record clips, take a snapshot, activate two-way talk or full
screen.
If you want to catch the smaller details, pinch and drag any image as you do with photos on your smart phone.
Speaker / Mute the audio: Here you can see if there is a Speaker or muted.
Videoļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šClick this button to start the recording function.
Snapshotļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šClick this button to Snapshot the image.
Two-way audioļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šPress and hold this button to enable microphone intercom.
Back
Speaker / Mute the audio
Resolution
Snapshot
Bit Rate
Camera Setting
Full screen
More Function
Two-way audio
Wired connection/
Wireless connection
Date
Timeline
Mirro
IR LED Schedule
Video
Floodlight
12
Dateļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šShow date, Display the date, you can select the date through ā€œ<ā€ or ā€œ>ā€button.
Timeline: If you have purchased cloud service, you can click the timeline to watch the storage video at the
corresponding time on the cloud.
Camera Setting: Click this button to set more.
IR LED Schedule: On this page, you can enable/disable the IR LED, and set the IR auto switch or you can
schedule it.
Auto: As default, the IR-Cut auto switch is ON, it means that the IR LED will be OFF during 9:00~18:00,
and the IR LED will be ON at the other time.
Day: it means that the IR LED will be OFF all the time.
Night: it means that the IR LED will be ON all the time.
Schedule: You can schedule the time to turn the IR LED OFF/ON.
Mirro: You can flip the image horizontally with this button.
Wired connection / Wireless connection: You can use this to see whether the current camera is in a wired or
wireless connection.
Bit Rate: You can see the current connection bit rate.
Full screen: Click this full screen button, you can live in full screen.
More Function: Here you can set Activity Detection and Sound Detection.
Note: Motion Detection and face Detection cannot be turned on at the same time.
Activity Detection:To enable Activity detection, follow the steps below:
13
1 Enable Activity Detection button
2 Click Alarm when a movement is detected or Alarm only when a human is detected.
Alarm when a movement is detected: Alarm when a movement activity is detected.
Alarm only when a human is detected: Alarm only when a human is detected.
3 Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the
camera will be more easily alarmed. Select one motion sensitivity.
4 Triggered Interval----The interval time between two motion detection. Here supports
5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time.
5 Schedule: Click the rectangle in the day of the week, and the corresponding time
setting will be selected. For example, click "Sun", the time "00:00~24:00"
will be set in "Sun", which means that when there is an object moving in
the detection area, the APP will receive the camera's Motion alarm Push messages.
6 Specify Detection area: Drag the selection box to select the alarm area,click back to pop up Save or
Cancel, select save.
14
.
NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and
anytime.
Siren Linkage: When an alarm is triggered, the camera makes a sound.You can turn it on as needed.
Floodlight Linkage:When an alarm is triggered, and at night, the floodlight lights up, you can turn it on as
needed.
Sound Detection: To enable Sound detection, follow the steps below:
1 Enable Sound Detection button
2 Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the
camera will be more easily alarmed. Select a Sound sensitivity.
3 Schedule: Click the rectangle in the day of the week, and the corresponding time
setting will be selected. For example, click "Sun", the time "00:00~24:00"
will be set in "Sun", which means that when there is an object moving in
the detection area, the APP will receive the camera's Face alarm Push messages.
15
2.3 Camera Setting
Tap the button, goes to Device Settings to make advanced camera settings.
2.3.1 My Plan
Here you can choose a 7-day free cloud service experience, and you can also purchase related cloud
packages according to your needs. After successful activation, you can enjoy storing videos on the cloud
anytime, anywhere.
2.3.2 Alarm
Click this button, and then you can refer to More Function in 2.2
16
2.3.3 SD Card
If you have an SD card on your device, click this button to enter the SD-Card Video Playback.You can filter the
corresponding videos according to the time and type.
Settings
Click the button enter to SD Card settings, you can set SD card info and Recording Schedule.
17
SD card info
Click the button enter to SD Card settings, you can view the SD card storage information from this page,
and you can also format the SD card.
Recording Schedule
Click the button enter to Recording Schedule setting, you can setting Loop Coverage, Voice Recording
and Recording Schedule. Click Recording Schedule set and then click the rectangle in the day of the week,
and the corresponding time setting will be selected. For example, click "Sun", the time "00:00~24:00" will be
set in "Sun", which means that during this time period, the camera will automatically record to the SD card.
2.3.4 Firmware
You can see the current camera's firmware version and whether there is new software that needs to be
upgraded.if there is new firmware, you can click the ā€œUpgradeā€ button to upgrade.
18
2.3.5 Camera Info
You can see the basic information of the camera through this, such as Camera name, UID, MAC ID and
firmware version information.
2.3.6 Share Camera
If you set up family members in my family, you can share the camera with your family here.Or you can invite
other users to watch the live broadcast in the form of username and account information.
19
2.3.7 Motion Zones For Light
Customize the area where you want motion to turn on your light.
20
2.3.8 Privacy mask
This can be used to set certain masks as private areas on the video. Click + draw a mask area on the video ,
the mask area will be black on the video .Click the back button, the save page appears, click save, click Save
to take effect.
Back to the surveillance window, you can see the mask area as the following picture:
The mask area.
21
2.3.9 WiFi Settings
If you selected Wired Connection via the Foscam, Tap the ā€œWiFi Settingsā€ button > select your WiFi
network and enter your WiFiā€™s password. After setting up successfully, you can view live video without the
Ethernet cable.
2.3.10 Advanced Settings
Click on advanced settings to enter the advanced settings page, where you can set Security Settings, Light
Settings, Power Frequency, Smart Control, Sync Time, NVR Connection, Restart Device, Reset Device,Video
Settings, Prompt Settings, Screen Flip and Camera Speaker Volume settings.
Security Settings
You can modify the username and password of the camera here.
Light Settings
On this page you can set the IR LED Settings and Floodlight.
IR LED Settings You can set according to your needsļ¼š
22
Floodlight You can set according to your needsļ¼š
Power Frequency
You can see the power supply type from here.
Smart Control
On this page you can set Device Name and Region.
Note: Please select the corresponding to the area where you third-party smart speaker account is registered.
If the connection is abnormal, you can try to change the area or contact Foscam customer service or contact
third-party customer service to change the area registered by Alexa app.
Sync Time
On this page, you can set the camera time, which can be synchronized with the phone time or NTP auto Sync
and you can also select the time zone.
NVR Connection
If your device has been added to one of FN7108HE / FN3109H / FN3104H, please be sure to turn on this
switch, otherwise the recording will be unsuccessful, and your live broadcast screen will switch to 720p. If it is
not added under NVR, please close it.
Restart Device
You can restart your camera from here.
23
Reset Device
You can reset your camera from here.
Video Settings
On this page you can set show time Overlay, Show Camera Name Overlay, Network Auto-Adaptability and
HDR Settings.
Prompt Settings
On this page you can set Status LED and Voice Prompt
Screen Flip
On this page you can set Screen Flip.
Camera Speaker Volume
On this page you can set Camera Speaker Volume, you can adjust the volume by dragging.
2.3.12 Reboot Camera
Click to reboot the camera. This is similar to unplugging the power to the cameraReboot .
24
2.3.13 Delete camera
You can click the delete Camera button to delete the camera from the app, or delete and keep history files from
the app.
25
3 Surveillance Software Foscam VMS
3.1 Hardware Connection & Software Installation
1. Connect the camera to the network, make sure it is on the same network as the computer
2. You can download the ā€œFoscam VMSā€ Windows version from , and can download thefoscam.com/vms
"Foscam VMS" Mac version from the APP store:
https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12
Download and install according to the installation wizard.
3.2 Create Account
You can create a local administrator account.
For security, it is strongly recommended to create local accounts and password management, which prevents
the entry of intruders.
26
you haven't created a local administrator account, please click Create Account to create.
After creating a local administrator account, you can:
1. Use the account to log in to the client to ensure information security.
2. Create sub-accounts and assign different permissions for management.
3.3 Add Device
3.3.1 LAN Add
If your doorbell is wired connect, you can choose the following method to add to FoscamVMS.
Click button, then follow below steps:Add Device
27
Step1 Select ā€œALLā€ from the device types.
Step2 Click the IP address of the camera on the list, then the name of the camera and the IP information will
be entered automatically.
Step 3 Click Add.
Step 4 Enter the username and password of the camera.
Please Note: Make sure the camera and PC are both in the same Local Area Network (LAN).
3.3.2 Manual add via IP
You can add the camera use manual add via IP also. Click the Manual add first, then follow below steps:
28
Step 1 Select the IP address from Connection Mode
Step 2 Enter the IP and Port of the camera.
Step 3 Select ā€œIPCā€ or ā€œNVRā€ from the Device types.
Step 4 Click Add
Step 6 Enter the username and password of the camera.
29
3.3.3 Manual add via UID
You can add the camera use manual add via UID also. Click the Manual add first, then follow below steps:
Step 1 Select the UID from Connection mode
Step 2 Enter the UID of the device.
Step 3 Click Add
30
Step 4 Enter the user name and password of the camera.
3.3.4 Connect the camera to WiFi
You can add the camera via Connect the camera to WiFi also. Click Connect the camera to Wi-Fi or the
button first, then follow below steps:
31
.
Step 1 WiFi Name WiFi Password NextEnter the and , then click
Note: Please reset your camera.
Step 2 Please scan the QR code above with the camera you want to add. After the scan is
successful, click confirm.
32
Step 3 LAN add stepsReturn to the device list to connect the device, refer to the
3.3.5 Manually Add via DDNS
You can add the camera use manual add via DDNS also. Click the Manual add first, then follow below steps:
Step 1 Select the DDNS from the Connection Mode
Step 2 Enter the DDNS and Port of the camera.
Step 3 Select ā€œIPCā€ or ā€œNVRā€ from the Device types.
Step 4 Click Add
33
Step 5 Enter the username and password of the camera.
34
3.4 Surveillance Software GUI
First time you login the software, the whole video window is gray, you need to connect the cameras and add
cameras to it.
Section1 Menu Bar
Path to surveillance window. Click this button enter to Device List and back to the surveillance
window.
Playback the video recording, you can choose playback type and play video on local or
SD card.
Add Device, please refer chapter 3.4 for the detail setting.
More, You can Setting Personal Account, Preference, Left Bar and Switch Account.
Section2 Left Bar
Add Group: Click the button, you can group the device list according to your needs.
1
2
3
4
5
6
35
Left Bar of Live: You can view the list of connected cameras
1-----Reconnect
Click the settings button and the device will reconnect.
2----- Move To
Click this button, you can move the device to your group list.
3-----SD Card
If you have an SD card on your device, click this button to enter the SD directory.
4-----Delete
Click the button, Delete the device.
5----- Setup
Click the button Settings, goes to Control Panel to make advanced camera settings.Device Settings
Section3 Live Window
1
2
3
4
5
36
1-----Close
Click the icon to close this channel live window
2-----Device Name
Show view channel and camera name.
3-----Recording and Alarm status
This icon will turn to red, it indicates that the camera is recording
This icon will turn to yellow, the motion is detected during the detection time in the detection area, the
camera alarm and adopt the corresponding alarm indicators
4----- Record / Snap Shot / Sound / Talk button
Record ----- Click it and do manually recording. When recording, icon 1 will turn to blue. Click it again and stop
recording. The recording files will be stored to C disk automatically
Snap Shot Captured----- Click it to make snapshot. After snapshot, the button banner will prompt
Successfully. And you can find the picture on default path C:\VMS_CAPTURE
Sound ----- Click the icon then you will hear sound captured by the camera's built-in microphone. You may
1
2
3
4
Record
Snap Shot
Sound
Talk
37
need to plug in earphones or enable the computer speakers to hear from the camera's microphone. Make sure
the camera supports audio. Click again and stop audio.
Talk ----- Click the button, then talk to the microphone that connected with PC, people around the camera can
here you voice. Click the icon again and stop talking.
Section4 The number of split-screen
Click this button to select the number of split-screen on one page.
The client can monitor many cameras at one page, here you can choose the display number. The maximum
number is 16.
Section5 Live Cruise / Close All / Full Screen / Hide Bar
Live Cruise ----- Click this button to Live Cruise, you can click button to add a loop page for live
Cruise or click button to reduce the loop page for live Cruise.
Close All ----- Click this button to close all the cameras
Full Screen ----- Click this button to enter full screen, Click this button to enter full screen, then click to
exit full screen.
Hide Bar ----- Click this button, Hide and show Pan / Tilt control Bar
Section6 Spotlight / Siren / Display / Night Vision
Spotlightļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šYou can set Spotlight.
Sirenļ¼š
ļ¼š
ļ¼š
ļ¼šļ¼šYou can set Siren.
Display: You can set HDR and Mirror.
38
Night Vision: You can set Night Vision.
3.5 Advanced Camera Settings
Click the button, goes to Device Settings to make advanced camera settings.
3.5.1 Status
Status contains two columns: Device Information and Logs, it will show you various information about your
camera.
39
3.5.1.1 Device Information
Device Name: The Device Name is a unique name that you can give to your device to help you identify it.
Click Basic Settings and go to Camera Name panel where you can change your camera name. The default
device name is Foscam_camera.
System Firmware Version: Display the System Firmware version of your camera.
App Firmware Version: Display the application firmware version of your camera.
MAC ID: Display the MAC address of your camera. For example Device ID is 00626EE96E3C, the same
MAC ID sticker is found at the bottom of the camera.
Device Time: The system time of the device. Click Basic Settings and go to Device Time panel and adjust
the time.
3.5.1.2 Device Status
On this page you can see device status such as Alarm status, NTP status, IR LED Status and so on.
40
3.5.1.3 User Access Status
Session status will display who and which IP is visiting the camera now
41
3.5.1.4 Logs
The log record shows who and which IP address accessed or log out the camera.
3.5.2 Basic
This section allows you to configure your Device Name, Time, User Accounts, Status Light and Voice Prompt.
3.5.2.1 Camera Name
Default alias is Foscam_camera. You can define a name for your camera here such as apple. Click Save to
save your changes. The alias name cannot contain special characters.
Click the page number and go to the
corresponding page to see more logs
Full in one page number, click go GO button
and go to the corresponding page.
42
3.5.2.2 Device Time
This section allows you to configure the settings of the internal system clock for your camera.
Time Zone: Select the time zone for your region from the drop down menu.
Sync with NTP server: Network Time Protocol will synchronize your camera with an Internet time server.
Choose the one that is closest to your camera.
Use DST use DST: Select the (Daylight Saving Time, to set the clock ahead of the real-time), then set the start
time and end time of the DST, select the daylight saving time from the drop-down menu at last.
Click button and submit your settings.Save
3.5.2.3 User Accounts
Here you can create users and set privilege, visitor, operator or administrator. The default administrator user
accounts are administrator with a blank password.
43
How to change the password?
Firstly, select the account which you want to change the password, then select , enter theChange password
old password and the new password, lastly click modify to take effect.
How to change the username?
Select the account which you want to change the username, then select Change username, enter the new
username and the password, lastly click modify to take effect.
.
3.5.2.4 Status Light
If you have a power and network status light on your camera, you can turn it on and off with this feature. This
camera donā€˜t have the status light described above.
44
3.5.2.5 Voice Prompt
You can set the voice prompt on the camera to turn on and off if you connect an external audio device.
3.5.3 Network
This section will allow you to configure your camera's information.
3.5.3.1 IP
If you want to set a static IP for the camera, please go to page. Keep the camera in the same subnet of yourIP
45
router or computer.
It is recommended that you use the subnet mask, gateway and DNS server from your locally attached PC. If
you don't know the subnet mask, gateway and DNS server, you can check your computer's local area
connection as follows:
Control Panel--Network Connections--Local Area Connections --Choose Support--Details.
46
If you don't know the DNS server, you can use the same settings as the Default Gateway.
3.5.3.2 WiFi
Step 1: Click the Scan button and the camera will detect all wireless networks around the area. It should also
display your router in the list.
Step 2: Click the SSID (name of your router) in the list, the corresponding information related to your network,
such as the name and the encryption, will be filled into the relevant fields automatically.
Click the Scan button
to search for wireless
networks.
47
You will only need to fill in the password of your network. Make sure that the SSID, Encryption and the
password you filled in are exactly the same for your router.
Step 3: Please click on the Save button after all settings have been entered and disconnect the network cable.
Never shut down the power of the camera until the IP camera is able to connect to the wireless network.
The LAN IP address will disappear on the window of Add Device when the camera is configuring a
wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of
the camera will show again on the window of Add Device The IP address may have changed
after the camera receives a wireless connection; we recommend setting a static local IP address if this IP
address changes by right clicking the camera in Equipment Search Tool, setting a static IP, and pushing OK .
Congratulations! You have set up the wireless connection of the camera successfully.
NOTE: If you fail to make a wireless connection, please refer to your seller or contact us directly for
assistance.
3.5.3.3 DDNS
FOSCAM cameras can use third-party domain names.You can choose the corresponding third-party domain
name.
1 Click the SSID of your router
and the relevant information
will be filled in the fields
automatically.
2 Enter the password of
your router .
3 Click Test to check
if the password is
correct or not.
48
3.5.3.4 Port
This camera supports HTTP Port / HTTPS Port/ ONVIF Port. HTTP Port is used to access the camera
remotely.
HTTP port: By default, the HTTP is set to 88. Also, they can be assigned with another port number between 1
and 65535. But make sure they can not be conflict with other existing ports like 25, 21.
3.5.3.5 P2P
Access the camera by smart phone (Android or iOS operating system)
First of all, you need to open the P2P function of the camera at .> Network > P2P
49
3.5.3.6 FTP
If you want to upload record images to your FTP server, you can set FTP.
FTP server: If your FTP server is located on the LAN, you can set as Figure a.
If you have an FTP server which you can access on the internet, you can set as Figure b.
Port: Default is port 21. If changed, external FTP client program must change the server connection port
accordingly.
Mode: Here supports two modes: PORT and PASV.
Username / password: The FTP account and password.
Click to take effect.Save
Click Test to see if FTP has been successfully configured.
3.5.3.7 Mail Settings
If you want the camera to send emails when motion has been detected, here Mail will need to be configured.
50
1----- SMTP Server/ Port /Transport Layer Security Enter SMTP server for sender. SMTP port is usually
set as 25. Some SMTP servers have their own port, such as 587 or 465, and Transport Layer Security usually
is None. If you use Gmail, Transport Layer Security must be set to TLS or STARTTLS and SMTP Port must be
set to 465 or 25 or 587, which port you choose should be decided by which Transport Layer Security you
select.
2----- SMTP Account/ password ID account and password of the sender email address
3----- E-mail Sender Mailbox for sender must support SMTP
4----- Receiver Mailbox for receiver need not support SMTP, you can set 4 receivers
5----- Save Click Save to take effect
6----- Test Click Test to see if Mail has been successfully configured.
Click Test to see if Mail has been successfully configured.
1
2
3
6
4
5
51
If the test success, you can see the Success behind the Test, at the same time the receivers will receive a test
mail.
If the test fails with one of the following errors after clicking Test, verify that the information you entered is
correct and again select Test .
1) Cannot connect to the server
2) Network Error. Please try later
3) Server Error
4) Incorrect user or password
5) The sender is denied by the server. Maybe the server need to authenticate the user, please check it and try
again
6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server
7) The message is denied by the server. Maybe because of the anti-spam privacy of the server
8) The server does not support the authentication mode used by the device.
3.5.4 Video
This section allows you to configure Video Encode settings, On screen display, Snapshot and IR LED settings.
3.5.4.1 Video Encode
This is main Encode video settings.
52
Stream type: There are four types to identify different streams you have set.
Resolution: The camera supports multiple types, For example: 2K,3M,1080P, 720P, VGA. The higher the
resolution is, the clearer video will become. But the code flux will become larger too, and it will take up more
bandwidth. (Different models support different specific types. )
Bit Rate: Generally speaking, the larger the bit rate is, the clearer video will become. But the bit rate
configuration should combine well with the network bandwidth. When the bandwidth is very narrow, and bit rate
is large, that will lead to video can not play well.
Frame Rate: Note that a larger frame size takes up more bandwidth. When the video format is 50Hz, the
maximum frame rate is 25 fps. When the video format is 60Hz, the maximum frame rate is 30 fps. You should
lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve
fluently video.
Key Frame Interval: The time between last key frame and next key frame. The shorter the duration, the more
likely you will get a better video quality, but at the cost of higher network bandwidth consumption.
Variable Bitrate: Select the Bit rate type to constant or variable. If select Yes, the camera will change the
video bit rate according to the situation, but will not more than the maximum parameter "Bit Rate"; If select ,No
the Bit Rate is unchanged.
3.5.4.2 On Screen Display
This page is used to add time stamp and device name on the video.
Display Timestamp: There are two options: Yes or NO. Select Yes and you can see the system date on the
video,
Display Camera Name: There are two options: Yes or NO. Select Yes and you can see the device name on
the video.
53
3.5.4.3 Privacy
This page is used to set some mask as privacy zone on the video.
Privacy Zone: Allow On Screen Display Mask, there are two options, Yes or NO.
Select Yes and draw a mask area on the video, the mask area will be black on the video.
The mask area
54
Click Save button and return to the Privacy Zone page, click Save to take effect.
Back to the surveillance window, you can see the mask area as the following picture.
3.5.4.4 Snapshot
On this page you can set the snapshot pictures' image quality and the storage path.
Manual Snap Quality: Low, Middle and High. The higher the quality, the picture will be clearer.
Pictures Save To: FTP. If you have done FTP and Alarm settings, when alarming, the camera will snap
pictures to the FTP automatically. If you select the FTP, you can set the file name which the picture save to.
55
Enable Timing to Capture
To enable capture interval, follow the steps below:
1 Enable timing to captureSelect
2 Capture interval: The interval time between two captures.
3 Select the capture time
ļ¬Capture anytime
Click the black button up the MON, you will see all time range turn red. When something moving in the
detection area at anytime, the camera will capture.
ļ¬Specify an capture schedule
Click the week day words, the corresponding column will be selected. For example, click TUE, the all
column of TUE turns to red, that means during Tuesday whole day, the camera will capture.
ļ¬Press the left mouse and drag it on the time boxes, you can select the serial area,
4 SaveClick button to take effect.
3.5.4.5 IR LED
There are three modes to set the IR LED lights.
Auto: The default mode is auto. On this mode, IR LED lights will be switched automatically depended on the
brightness of enviroment.
Manual: On OffOn this mode, you can click option to turn on the IR LED lights, and click option to turn off the
IR LED lights.
Schedule: On this mode, IR LED lights will be turned off during the setting schedule .You can set the period of
time during which the infrared lamp is turned off to prevent your baby from being influenced during sleep. You
can also turn off the infrared lamp on the video preview page at any time.
56
3.5.4.6 Color Adjustment
You can adjust the settings to your liking.
3.5.4.7 NAA
Enabling NAA(Network Auto-Adaptability) can make IP Camera changing the real-time rate to adapt different
network conditions, which can supply better preview experience.
57
3.5.4.8 HDR
You can choose to turn it on or off according to your own scene.
3.5.5 Detector
3.5.5.1 Motion Detection
IP Camera supports Motion Detection Alarm, when the motion has been detected, it will send emails or
upload images to FTP.
58
To enable motion detection, follow the steps below:
1 Enable Detection Switch
2 Set detection area You can set the alarm area.
3 Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera will be
more easily alarmed. Select one motion sensitivity.
4 Trigger Interval----The interval time between two motion detections. Here supports
5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time.
5 Snap Interval---- The interval time between two pictures.
6 Select the alarm Action
There are some alarm indicators:
A Camera Sound
If you select Camera Sound, when the motion has been detected, the people around the Camera will hear
beep alarm sound, if the device is connected with the audio output device.
B PC Sound
If you select PC Sound, when the motion has been detected, the people around the PC will hear beep alarm
sound.
C Send E-mail
1
3
4
5
6
7
8
2
59
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Settings first.
D Recording
If you select this checkbox, when the motion has been detected, the camera will recording and load it to the
FTP server. Make sure you have set FTP and set FTP as the storage path in Video->Snapshot settings panel
.
E Take Snapshot
If you select this checkbox, when the motion has been detected, the camera will snap the live view window as
a still picture and load it to the FTP. Make sure you have set the storage path in Video > Snapshot Settings
panel.
F Push message to the phone
If you select this checkbox, when the motion has been detected, the camera will push the message to the
phone which has been connected the camera.
7 Alarm Schedule
1. Alarm anytime when motion is detected
Click the black button up the MON, you will see all time range turn red. When something moving in the
detection area at anytime, the camera will alarm.
2. Specify an alarm schedule
Click the week day words, the corresponding column will be selected. For example, click TUE, the all column
of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the
camera will alarm.
Click this button and select all time range.
60
3. Press the left mouse and drag it on the time boxes, you can select the serial area,
8 Click Save button to take effect. When the motion is detected during the detection time in the detection area,
the camera will alarm and adopt the corresponding alarm indicators.
NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and
anytime.
3.5.5.2 Sound Detection
When the ambient sound over a certain decibel ,the sound alarm will be triggered.
61
To enable motion detection, follow the steps below:
1 Enable Detection Switch
2 Sensitivity---- It supports three modes: Low, Middle and High. The higher the sensitivity, the camera will be
more easily alarmed. Select one motion sensitivity.
3 Trigger Interval----The interval time between two motion detections. Here supports
5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time.
4 Snap Interval---- The interval time between two pictures.
5 Select the alarm indicators
There are some alarm indicators:
A Camera Sound
If you select Camera Sound, when the sound has been detected, the people around the Camera will hear beep
alarm sound, if the device is connected with the audio output device.
B PC Sound
If you select PC Sound, when the sound has been detected, the people around the PC will hear beep alarm
sound.
C Send E-mail
1
2
3
4
5
6
7
62
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Settings first.
D Recording
If you select this checkbox, when the sound has been detected, the camera will recording and load it to the
FTP server. Make sure you have set FTP and set FTP as the storage path in Video->Snapshot settings panel
.
E Take Snapshot
If you select this checkbox, when the sound has been detected, the camera will snap the live view window as a
still picture and load it to the FTP. Make sure you have set the storage path in Video > Snapshot Settings
panel.
F Push message to the phone
If you select this checkbox, when the sound has been detected, the camera will push the message to the
phone which has been connected the camera.
6 Alarm Schedule
4. Alarm anytime when sound is detected
Click the black button up the MON, you will see all time range turn red. When something moving in the
detection area at anytime, the camera will alarm.
5. Specify an alarm schedule
Click the week day words, the corresponding column will be selected. For example, click TUE, the all column
of TUE turns to red, that means during Tuesday whole day, when something sound in the detection area, the
camera will alarm.
Click this button and select all time range.
63
6. Press the left mouse and drag it on the time boxes, you can select the serial area,
7 Click Save button to take effect. When the sound is detected during the detection time in the detection area,
the camera will alarm and adopt the corresponding alarm indicators.
NOTE: You must set the detection area and detection schedule, or else there is no alarm anywhere and
anytime.
5.3.5.3 PIR Detection
Customize the area where you want motion to turn on your lights.
64
5.3.5.4 Alarm Linkage
After setting an URL, when camera triggers a detection, will call the URL.
step:
1. You can fill in the alarm linkage address in the Full URL and click the Generate button, or modify it in the
saved information, then click Save.
2. Full URL example: http://username:password@ip:port/json.htm?command=switchlight.
65
3.5.6 Record
3.5.6.1 Storage Management
On this page you can choose Record Storage Path. The record storage path default is SD card.
3.5.6.2 Alarm Recording
On this page you can configure the Alarm-recording Time, Enable pre-record time and Alarm-Recording time.
3.5.6.3 Schedule Recording
On the page you can configure the schedule record.
Note: Schedule Recording only supports SD Card. Schedule Recording can only be enabled after the
recording path is set Please set the path in the storage management.
66
Click button to take effect.Save
3.5.7 System
In this panel, you can back up/restore your camera settings, upgrade the firmware to the latest version, restore
the camera to default settings and reboot the device.
3.5.7.1 Back-up & Restore
Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for future
use.
Click Browse and select the parameters file you have stored, then click Submit to restore the restore the
parameters.
67
3.5.8.2 System Upgrade
Click , you will see the following screen. And click to save the firmwareDownload the Latest Firmware Save
on your computer locally.
Your current firmware version will be displayed on your screen. You may go to the Status > Device
Information page to check for the latest firmware versions available.
Click , choose the correct bin file and then click .Browse System upgrade
Don't shut down the power during upgrade. After upgrading, you can see the upgrade result.
3.5.7.3 Patch Installation
Click " " to select the correct patch file, and then click " " to install the patch. Do not turn offBrowse Install Patch
the power during it installing. After installing is complete, you will receive a system prompt.
68
3.5.7.4 Factory Reset
Click button and all parameters will return to factory settings if selected.Factory Reset
3.5.7.5 Reboot
Click to reboot the camera. This is similar to unplugging the power to the cameraReboot .
You can set Enable periodic maintenance and set Period.
69
70
4 Appendix
4.1 Frequently Asked Questions
NOTE: Any questions you would meet, please check Network connections firstly. Check the working status
revealed by the indicators on the network server, hub, and exchange. If abnormal, check the network
connections.
4.1.1 Unable to connect to router wirelessly
After setup wireless configuration, and input the wireless password correctly, save the settings. Normally, after
you disconnect the Ethernet cable, wait for few minutes camera will show up again in Foscam VMS LAN list
with a new IP address. That indicates your cameraā€™s connected wireless.
If not, please follow below steps to help camera connect wireless.
Step1: Please make sure wireless signal is strong enough to connect with.
(1) Best to keep the distance between the camera and router in 2~3 meters while setup;
(2) Thereā€™s no interference or obstacles from house appliance or walls;
Step2: Please check if your wireless password contains special characters.
Remove special character in SSID and wireless password to have a try.
Step 3: Reboot camera and router to have a check.
If above are all confirmed, power off and on the camera and router may help camera to connect.
Step 4: Please log-in the router and check if the MAC filter feature is enabled.
Camera has wired and wireless MAC, they are different. If your router has wireless MAC filtering turned on, itā€™ll
block camera to connect. Please turn it off, or add cameraā€™s MACs in the allow list.
Step 5: Please change the wireless channel, and the wireless encryption of router to have a try.
Change channel helps reduce influence from nearby WiFi networks, you can try 3,6,or 11 for example. As for
encryption, suggest use WPA2/PSK AES.
Step6: At last reset camera to default, and please try re-configure the wireless settings again.
4.1.2 Forgot cameraā€™s user name and password
Camera can be hard reset to default settings, when you forgot cameraā€™s login user name and password. Below
are the steps:
(1) Keep power on camera;
(2) Press and hold reset button of camera for 30 second, till it reboots. Reset button is on bottom, or back, or
end cords of the camera.
(3) Once reset, camera will be restored to default settings. Then re-use Foscam APP or FoscamVMS to add
71
and set a new user name and password.
4.1.3 How to setup alarm recording to Micro SD card
For the cameras that support Micro SD card, we can save alarm recording on SD card and below are the steps
to set it up:
Step 1: Setup the Motion Detection Settings
Please go to > > Motion Detection menu.Device Settings Detector
(1) Click for the Detection swich.ON
(2) Choose for the Action.Recording
(3) Set the Detection Area
(4) Set a Schedule.
(5) Click to save the settings.Save
72
Note:
1) Please DO NOT forget to set the alarm schedule, the alarm schedule is red.
2) Please make sure your camera time is correct.
3) Please DO NOT forget to set the alarm area, the detected area is covered by the red grids. Or for some
models you can setup 3 detection zones in total.
Step 2: Setup the Storage Location
Go to > > , and set the ā€œRecording Locationā€ to ā€œSD card and clickDevice Settings Record Storage Location
Save.
73
Note:
SD card needs format correctly so itā€™ll be identified by camera, and has enough space for saving the recordings.
Itā€™s suggested to use FAT32 for 4G~128G SD card.
4.1.4 Unable to connect camera remotely using Foscam app
Foscam P2P cameras allow users to connect camera remotely using Foscam app without extract setup like
port forwarding. When it unable to connect remotely, below tips can help app establish the connection:
(1) Update app and cameraā€™s firmware to latest version,
(2) Power off the camera then power back on,
(3) Delete camera from app then re-add it back, also lower cameraā€™s resolution.
4.1.5 Camera is added by others
When use Foscam app, one camera can only be added to one account at the same time. To solve error ā€œThis
camera has already been added by another accountā€ when add camera to Foscam app , please reset the
camera.
More FAQs are available here:
https://www.foscam.com/faqs/index.html
74
4.2 Default Parameters
Default network parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
4.3 Specification
ITEMS
Security Floodlight Camera
Floodlight
Security Light
2600lum(Two Floodlights),Adjustable brightness
Power Consumption
25W(Two Floodlights)
Color temperature
5000K
Lamp body material
Aluminum alloy
Image Sensor
Sensor
High Definition Color CMOS Sensor
Display Resolution
2688*1520 (4.0M Pixels)
Min. Illumination
0 Lux (With IR Illuminator)
Lens
Lens Type
Glass Lens
focal length
2.8mm
Aperture
F 2.4
Angle of view
Diagonal:156Ā°,Horizontal:121Ā°,Vertical:61Ā°
Video
Image Compression
H.264
Image Frame Rate
Max 25fps (4MP)
Resolution
2K(2560x1440),1080P(1920x1080),VGA(640x480)
Flip image
Flip and mirror
Night mode
Manual and automatic modes
Night visibility
10 m
Audio
Input/Output
Build-in mic and speaker,support full duplex real-time 2-way
Audio
Audio Compression
AAC
Siren
Support Alarm Siren
PIR
PIR Detection
Built-in 4PCS PIR sensor, detection Angle up to 270Ā°
Network
Ethernet
One 10/100Mbps RJ45 port
Wireless Standard
IEEE802.11b/g/n/ac
Wireless Security
WPA, WPA2
Remote Access
P2P
Wifi configuration mode
Support scan QR code , sound wave to add camera
Network Protocol
IP TCP UDP SMTP FTP RTSP态 态 态 态 态
Software
Features
Light control
Manual switch or alarm linkage, support the adjustment of
light brightness
75
Motion Detection
Alarm via E-Mail, upload alarm snapshot to FTP , push
message to mobile phone and push stream to Cloud
Sound Detection
Alarm via E-Mail, upload alarm snapshot to FTP , push
message to mobile phone and push stream to Cloud
Human Detection
Alarm via E-Mail, upload alarm snapshot to FTP , push
message to mobile phone and push stream to Cloud
PIR Detection
Built in 3pcs PIR Sensor(270Ā°/30ft),Supports sensitivity and
range adjustment
Privacy Block
Yes
User Accounts
Three levels user role
Firewall
Supports IP Filtering
Custom ringtones
Support to customize exclusive ringtones through mobile APP
Micro SD card
Support maximum 128GB Micro SD card storage
Cloud
Support cloud storage
LED
Indicator LED
Blue&Red
Reset
Reset
Reset button is available
Power
Power Supply
AC100~240V
Power Consumption
28Watts (Max.)
Physical
Dimension(LxWxH)
320(L)x 170(W)x220(H) (W)mm
Net Weight
1260g
Accessories
Installation Kit
US Installation Kit or EU Installation Kit
Environment
Waterproof
IP65
Operating Temperature
-20Ā°C~ 60Ā°C (-4Ā°F ~ 140Ā°F)
Operating Humidity
20% ~ 85% non-condensing
Storage Temperature
-20Ā°C ~ 60Ā°C (-4Ā°F ~ 140Ā°F)
Storage Humidity
0% ~ 90% non-condensing
Certification
CE, FCC, UL ERP RoHS,WEEE态 态
4.4 CE & FCC
Electromagnetic Compatibility (EMC)
FCC Statement
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. NOTE 1: This equipment has been tested and
76
found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or
relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the
equipment into an outlet on a
circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV
technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This
equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case
the user may be required to take adequate measures.
4.5 WARRANTY
FOSCAM values your business and always attempts to provide you the very best of service.
No limited hardware warranty is provided by FOSCAM unless your FOSCAM product ("product") was
purchased from an authorized distributor or authorized reseller. Distributors may sell products to resellers who
then sell products to end users. No warranty service is provided unless the product is returned to an authorized
return center in the region where the product was first shipped by FOSCAM or to the point-of-purchase, which
may have regional specific warranty implications.
If you purchase your FOSCAM product from online store, please contact the point-of-purchase and ask
for return / replacement / repair service.
Limited Hardware Warranty
FOSCAM products are warranted to be free from manufacturing defects in materials and workmanship starting
from the shipping date of FOSCAM.
This limited hardware warranty does not cover:
ļ¬Software, including the software added to the products through our factory-integration system,
software,etc.
ļ¬Usage that is not in accordance with product instructions.
ļ¬Failure to follow the product instructions.
ļ¬Normal wear and tear.
77
Return Procedures
ļ¬Please read FOSCAM warranty policy & policy of your reseller first before sending items back to
point-of-purchase.
ļ¬Customer must first contact point-of-purchase to obtain a Return Merchandise Authorization (RMA)
number before returning the product. If the product you received is suspected to be defective and the
product warranty has not expired, The RMA number will allow your reseller to track your return much
easier and help them expedite processing your request.
ļ¬After receiving your RMA case number, pack the item(s) very well with the original box and all the original
accessories included such as power adapters, brackets, cables, manuals.
ļ¬Write your RMA number and the return reason (the problem of the product) on the warranty card along
with the complete package to send them back.
Replacement Services
ļ¬If customers ask for replacement service, please contact point-of-purchase and follow their policy.
ļ¬Our technicians will inspect all items returned for replacement requests. If the retuned product is found in
working order, we will return the same item received. However customers shall be responsible for all
shipping & handling charges incurred for getting the units back to customers.
ļ¬If returned products are found defective, we will replace the product and assume the shipping cost for
sending back the replacement unit to customers.
ļ¬If for any reason, we are unable to provide a replacement of the original returned item(s). You will have a
choice for a "Substitute" item at the same equal value.
ļ¬We do not provide exchange and replacement due to normal hardware upgrade according the market
after 14 days after the product is delivered.
ļ¬Our technicians will test the product before send out the replacement, any other demand for more than
two times replacement for the same product during replacement limit will be rejected.
ļ¬Replaced products are warranted from the balance of the former warranty period.
Warranty Forfeiture
ļ¬Warranty is void if purchase from unauthorized distributor or reseller.
ļ¬Warranty is void if trade-mark, serial tags, product stickers have been removed, altered or
tampered with.
ļ¬Warranty is void for mishandling, improper use, or defacing the product.
ļ¬Warranty is void for physical damage, altered, either internally or externally, improper or inadequate
packaging when returned for RMA purposes.
ļ¬Warranty is void if damage has resulted from accident, dismantle, abuse, or service or modification by
someone other than the appointed vendor, souse, fission or the spare part has been over the period of
warranty.
ļ¬Warranty is void if product is damaged due to improper working environment or operation. (For example,
improper temperature, humidity, unusual physical or electrical stress or interference, failure or fluctuation
of electrical power, static electricity, using wrong power adapter, etc.)
ļ¬Warranty is void if damaged by the use of parts not manufactured or sold by FOSCAM.
ļ¬Damage caused by improper installation of third-party products.
ļ¬Warranty is void if damaged for irresistible cause, such as earthquake, fire, lightning, flood, etc.
ļ¬Product beyond limited warranty.
78
Shipping Fee
ļ¬If products are defective or damaged under normal use or operation in the replacement limit, distributors
or resellers are responsible for the shipping cost the product back to customers, customers should
assume the shipping cost send the product to the point-of-purchase.
ļ¬During replacement limit, if customers ask for replacement due to the product does not fit for customer's
personal expectation, customers should responsible for both shipping fee.
ļ¬Customers shall be responsible for both shipping fee if their product beyond the replacement limit but still
in warranty limit.
Repair Service Out Of Warranty
ļ¬FOSCAM provide extra repair service for product that out of warranty, it is chargeable. The total fee
contains device cost and service fee. Device cost (including accessories) is the standard uniform price
provide by FOSCAM.
ļ¬Different region may have different service fee, please contact the point-of-purchase to confirm that before
you ask for this service.
ļ¬Our technicians will quote the total price after detect the product, If customers refused to repair after the
quotation, customers need pay for the test fee, $3.5 / hour. If agree with the quotation, test will be free.
ļ¬Repaired product out of warranty will obtains 3-month warranty from the date of the product back to
customers.
Limitation of Liability
ļ¬FOSCAM is not responsible for other extra warranty or commitment promised by resellers, if your reseller
promised some extra commitment or warranty; please ask for written documents to protect your rights and
interests.
ļ¬FOSCAM does not offer refunds under any circumstances. Please contact the point-of-purchase and
follow their refund / return policy.
ļ¬FOSCAM shall not be liable under any circumstances for any consequential, incidental, special or
exemplary damages arising out of or in any connection with this agreement or the products, including but
not limited to lost profits, or any claim based on indemnity or contribution, or the failure of any limited or
exclusive remedy to achieve its essential purpose or otherwise. Purchaser's exclusive remedy, as against
FOSCAM, shall be the repair or replacement of defective parts. If FOSCAM lists a product on its website
specification in error or that is no longer available for any reason, FOSCAM reserves the right to explain it
without incurring any liability.
All rights reserved. FOSCAM and the FOSCAM logo are trademarks of ShenZhen FOSCAM
Intelligent Technology Limited., registered in the U.S. and other countries.
4.6 Statement
You are advised to be cautious in daily life, keep personal account information carefully, do not share personal
account easily. Change passwords of your account and equipment periodically, and upgrade equipment
firmware to strengthen security consciousness.
Our company makes no warranty, implied or otherwise, that this product is suitable for any particular purpose
or use. You need to abide by the relevant laws and regulations of the use restrictions when using Foscam
cameras. Our company takes no responsibility of illegal activities by using our products.
79
Our company takes no responsibility of the loss by force majeure, such as failure or faults of telecom system or
the Internet network, computer viruses, malicious attacks of hackers, information damage or loss, and faults of
computer system.
Foscam company does not need to take any responsibility of the special, incidental or corresponding loss by
the products of our company or any software provide by our company, including but not limited to operating
loss, profit or purpose. The company only takes the responsibility applicable to national and local legal
requirements.
Our company takes no responsibility of the loss caused by the following at ant time:
1) loss of purchases;
2) loss of intangible property damage, such as data, programs;
3) loss of compensation claimed by third-party customers.
Delete images, format the memory card or other data storage devices does not completely remove the original
image data. You can restore deleted files from discarded the storage device by commercial software, but which
will potentially lead to personal image data used maliciously by others. The privacy of the data security belongs
to user responsibility, the company takes no responsibility.
Parts mentioned in this statement should not be understood by the configuration description of the product
purchased by the customer, the product configuration must accord to the specific models purchased by the
customer.
Without the prior written permission of Foscam company, all the contents of relevant operating instructions
manual affiliated to the product must not be reproduced, transmitted, transcribed or stored in a retrieval system,
or translated into other languages.
Our company will reserve the right to improve and modify the product and corresponding manuals. The
company reserves the right of final interpretation on our products.
80
5 Obtaining Technical Support
While we hope your experience with the IP camera network camera is enjoyable and easy to use, you may
experience some issues or have questions that this User's Guide has not answered.
If you have problem with FOSCAM IP camera, please first contact FOSCAM reseller for solving the problems.
If our reseller cannot provide service, please contact our service department:
support@foscam.com
CE Certificate statement Website: https://www.foscam.com/company/ce-certificate.html
Exporter and Importer Information Opened to Public: https://www.foscam.com/company/open-information.html
Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd
Addr: Room 901-902, Building 1B, Xingke 1st Street, Shenzhen International Innovation Valley, Nanshan Dist.,
Shenzhen, 518055, China


Product specificaties

Merk: Foscam
Categorie: Bewakingscamera
Model: F41

Heb je hulp nodig?

Als je hulp nodig hebt met Foscam F41 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Foscam

Foscam

Foscam R8M Handleiding

10 December 2024
Foscam

Foscam PD5 Handleiding

9 December 2024
Foscam

Foscam SD8P Handleiding

4 December 2024
Foscam

Foscam V8P Handleiding

10 Juni 2024
Foscam

Foscam SD4H Handleiding

12 Maart 2024
Foscam

Foscam C5M Handleiding

10 Januari 2024
Foscam

Foscam V5P Handleiding

18 Augustus 2023

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera