Flymo EasiCut 500 Handleiding

Flymo Heggenschaar EasiCut 500

Lees hieronder de 📖 handleiding in het Nederlandse voor Flymo EasiCut 500 (9 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/9

®EasiCut 420/EasiCut 450/

EasiCut 420/EasiCut 450/

EasiCut 420/EasiCut 450/EasiCut 420/EasiCut 450/

EasiCut 500/EasiCut 510

EasiCut 500/EasiCut 510 EasiCut 500/EasiCut 510

EasiCut 600XT

EasiCut 600XTEasiCut 600XT

IMPOR

IMPORT

TANT INFORMA

ANT INFORMA

ANT INFORMATION

TION

Read be

Read bef

fore use

ore use

& retain f

& retain for future r

or future r

or future ref

eference

erence

EasiCut 420/450/500/510

EasiCut 420/450/500/510EasiCut 420/450/500/510

EasiCut 600XT

EasiCut 600XTEasiCut 600XT

Original Instructions

Original InstructionsOriginal Instructions

Carton Contents

Carton ContentsCarton Contents

IMPORT

IMPORTIMPORTANT !

ANT !

ANT !ANT !

Please check the contents of the carton are correct assembling your new product.

BEFORE

BEFOREBEFORE

IF ANY P

IF ANY PIF ANY P

ARTS ARE MISSING CONT

ARTS ARE MISSING CONTARTS ARE MISSING CONTAC

ACACT:-

T:-

T:-T:-

Husqvarna UK Ltd. Customer Service Department direct

Telephone : 0844 844 4558 UK 1800 882 350 ROI Fax : 01325 302530

instruction

instructioninstruction

manual

manualmanual

blade cover

blade coverblade cover

Handguard

HandguardHandguard

belt clip

belt clipbelt clip

instruction

instructioninstruction

manual

manualmanual

blade cover

blade coverblade cover

Handguard

HandguardHandguard

belt clip

belt clipbelt clip

EasiCut 420/450/500/510

EasiCut 420/450/500/510EasiCut 420/450/500/510

EasiCut 600XT

EasiCut 600XTEasiCut 600XT

If not used properly this product can be dangerous! This product can cause serious injury to the

operator and others, the warnings and safety instructions must be followed to ensure reasonable

safety and efficiency in using this product. The operator is responsible for following the warning

and safety instructions in this manual and on the product.

Explanation of Symbols on your product

Explanation of Symbols on your productExplanation of Symbols on your product

Warning.

Read the user instructions carefully to make

sure you understand all the controls and

what they do.

Remove plug from the mains immediately if

the cable is damaged or cut.

Do not expose to rain.

Do not leave the product outdoors while it

is raining.

The use of eye protection is recom-

mended.

Safety

SafetySafety

General P

General PGeneral Pow

owower T

er T

er Ter Tool Safety

ool Safety

ool Safety ool Safety Warnings

Warnings

WarningsWarnings

WWARNING

ARNING

ARNINGARNING Read all safety w

Read all safety w

Read all safety wRead all safety warnings and all

arnings and all

arnings and allarnings and all

instructions

instructionsinstructions.

Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all w

Save all wSave all warnings and instructions for future ref

arnings and instructions for future ref

arnings and instructions for future refarnings and instructions for future reference.

erence.

erence.erence.

The term ‘“power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

1) W

1) W1) Work area safety

ork area safety

ork area safetyork area safety

a) Keep w

Keep w

Keep wKeep work area clean and well lit.

ork area clean and well lit.

ork area clean and well lit.ork area clean and well lit.

Cluttered or

dark areas invite accidents.

b) Do not operate power tools in explosiv

Do not operate power tools in explosiv

Do not operate power tools in explosivDo not operate power tools in explosive

e e

atmospheres, such as in the presence of

atmospheres, such as in the presence of atmospheres, such as in the presence of

flammable liquids, gases or dust.

flammable liquids, gases or dust.flammable liquids, gases or dust.

Power tools

create sparks which may ignite the dust or fumes.

c) Keep children and bystanders a

Keep children and bystanders a

Keep children and bystanders aKeep children and bystanders aw

ww while

while

while while

ay ay

operating a power tool.

operating a power tool.operating a power tool.

Distractions can cause

you to lose control.

2)2) Electrical safety

Electrical safety

Electrical safetyElectrical safety

a) Po

PoPower tool plugs must match the outlet.

wer tool plugs must match the outlet.

wer tool plugs must match the outlet.wer tool plugs must match the outlet.

Never modify the plug in an

Never modify the plug in anNever modify the plug in any w

y w

y wy way

ayay.

.. Do not

Do not

Do not Do not

use any adaptor plugs with earthed

use any adaptor plugs with earthed use any adaptor plugs with earthed

(grounded) power tools

(grounded) power tools(grounded) power tools.

Unmodified plugs and

matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

Avoid body contact with earthed or grounded

Avoid body contact with earthed or grounded Avoid body contact with earthed or grounded

surfaces, such as pipes, r

surfaces, such as pipes, rsurfaces, such as pipes, radiators, ranges and

adiators, ranges and

adiators, ranges and adiators, ranges and

refrigerators

refrigeratorsrefrigerators.

There is an increased risk of

electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or w

Do not expose power tools to rain or w

Do not expose power tools to rain or wDo not expose power tools to rain or wet

et et

conditions.

conditions.conditions.

Water entering a power tool will

increase the risk electric shock.

d) Do not abuse the cord. Ne

Do not abuse the cord. Ne

Do not abuse the cord. NeDo not abuse the cord. Never use the cord

ver use the cord

ver use the cord ver use the cord

for carrying, pulling or unplugging the power

for carrying, pulling or unplugging the power for carrying, pulling or unplugging the power

tool.

tool.tool. Keep cord aw

Keep cord aw

Keep cord aw Keep cord away from heat, oil, sharp

ay from heat, oil, sharp

ay from heat, oil, sharp ay from heat, oil, sharp

edges or moving parts.

edges or moving parts.edges or moving parts.

Damaged or entangled

cords increase the risk of electric shock.

e) When operating a power tool outdoors

When operating a power tool outdoors

When operating a power tool outdoorsWhen operating a power tool outdoors, use an

, use an

, use an , use an

extension cord suitable f

extension cord suitable fextension cord suitable for outdoor use

or outdoor use

or outdoor useor outdoor use.

Use

of a cord suitable for outdoor use reduces the risk

of electric shock.

f) If operating a power tool in a damp location is

If operating a power tool in a damp location is

If operating a power tool in a damp location is If operating a power tool in a damp location is

unavoidable

unavoidableunavoidable, use a residual current device

, use a residual current device

, use a residual current device , use a residual current device

(

(( D) protected supply

D) protected supply

D) protected supplyD) protected supply

RCRC .

Use of an RCD

reduces the risk of electric shock.

3)3) Personal saf

Personal saf

Personal safPersonal safety

ety

etyety

a) Stay alert, watch what y

Stay alert, watch what y

Stay alert, watch what yStay alert, watch what you are doing and use

ou are doing and use

ou are doing and use ou are doing and use

common sense when operating a power tool.

common sense when operating a power tool.common sense when operating a power tool.

Do not use a power tool while y

Do not use a power tool while yDo not use a power tool while you are tired or

ou are tired or

ou are tired or ou are tired or

under the influence of drugs, alcohol or

under the influence of drugs, alcohol or under the influence of drugs, alcohol or

medication

medicationmedication.

A moment of inattention while

operating power tools may result in serious

personal injury.

b) Use personal protective equipment.

Use personal protective equipment.

Use personal protective equipment.Use personal protective equipment. Alw

Alw

Alw Always

ays

ays ays

wear ey

wear eywear eye protection.

e protection.

e protection.e protection.

Protective equipment such

as dust mask, non-skid safety shoes, hard had, or

hearing protection used for appropriate conditions

will reduce personal injuries.

c) Prevent unintentional starting.

Prevent unintentional starting.

Prevent unintentional starting.Prevent unintentional starting. Ensure the

Ensure the

Ensure the Ensure the

switch is in the off-position bef

switch is in the off-position befswitch is in the off-position before connecting

ore connecting

ore connecting ore connecting

to power source and/or battery pack, picking

to power source and/or battery pack, picking to power source and/or battery pack, picking

up or carrying the tool

up or carrying the toolup or carrying the tool.

Carrying power tools

with your finger on the switch or energising power

tools that have the switch on invites accidents.

d) Re

ReRemov

mov

movmove any adjusting key or wrench be

e any adjusting key or wrench be

e any adjusting key or wrench bee any adjusting key or wrench before

fore

fore fore

turning the power tool on

turning the power tool onturning the power tool on.

A wrench or a key

left attached to a rotating part of the power tools

may result in personal injury.

e) Do not overr

Do not overr

Do not overrDo not overreach. K

each. K

each. Keach. Keep p

eep p

eep peep p per footing and

per footing and

per footing and per footing and

roro

balance at all times.

balance at all times.balance at all times.

This enables better control

of the power tool in unexpected situations.

f) Dress p

Dress p

Dress pDress p perly

perly

perlyperly.

.. Do not wear loose clothing or

Do not wear loose clothing or

Do not wear loose clothing or Do not wear loose clothing or

roro

jewellery

jewelleryjewellery.

.. Keep y

Keep y

Keep y Keep your hair, clothing and glov

our hair, clothing and glov

our hair, clothing and glovour hair, clothing and gloves

es es

awa

awaaway from moving parts.

y from moving parts.

y from moving parts.y from moving parts.

Loose clothes,

jewellery or long hair can be caught in moving

parts.

g) If devices are p

If devices are p

If devices are pIf devices are p vided for the connection of

vided for the connection of

vided for the connection of vided for the connection of

roro

dust extraction and collection f

dust extraction and collection fdust extraction and collection facilities,

acilities,

acilities, acilities,

ensure these are connected and p

ensure these are connected and pensure these are connected and p perly

perly

perly perly

roro

used

usedused.

Use of dust collection can reduce dust-

related hazards.

4)4) wer tool use and care

wer tool use and care

wer tool use and carewer tool use and care

PoPo

a) Do not force the po

Do not force the po

Do not force the poDo not force the power tool. Use the correct

wer tool. Use the correct

wer tool. Use the correct wer tool. Use the correct

power tool f

power tool fpower tool for your application

or your application

or your applicationor your application.

The correct

power tool will do the job better and safer at the

rate for which it was designed.

b) Do not use the power tool if the switch does

Do not use the power tool if the switch does

Do not use the power tool if the switch does Do not use the power tool if the switch does

not turn it on and off

not turn it on and offnot turn it on and off.

Any power tool that

cannot be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source

Disconnect the plug from the power source

Disconnect the plug from the power source Disconnect the plug from the power source

and/or the battery pack from the power tool

and/or the battery pack from the power tool and/or the battery pack from the power tool

before making an

before making anbefore making any adjustments, changing

y adjustments, changing

y adjustments, changing y adjustments, changing

accessories, or storing pow

accessories, or storing powaccessories, or storing power tools

er tools

er toolser tools.

Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

Store idle power tools out of the reach of

Store idle power tools out of the reach of Store idle power tools out of the reach of

children and do not allow persons unfamiliar

children and do not allow persons unfamiliar children and do not allow persons unfamiliar

with the power tool or these instructions to

with the power tool or these instructions to with the power tool or these instructions to

operate the power tool.

operate the power tool.operate the power tool.

Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools

Maintain power tools

Maintain power toolsMaintain power tools. Check for

. Check for

. Check for . Check for

misalignment or binding of moving parts,

misalignment or binding of moving parts, misalignment or binding of moving parts,

breakage of parts and any other condition

breakage of parts and any other condition breakage of parts and any other condition

that may affect the po

that may affect the pothat may affect the power tool’s oper

wer tool’s oper

wer tool’s operwer tool’s operation. If

ation. If

ation. If ation. If

damaged, have the po

damaged, have the podamaged, have the power tool repaired befor

wer tool repaired befor

wer tool repaired beforwer tool repaired before

e e

use.

use.use.

Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean.

Keep cutting tools sharp and clean.

Keep cutting tools sharp and clean.Keep cutting tools sharp and clean.

Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

Use the power tool, accessories and tool bits

Use the power tool, accessories and tool bits Use the power tool, accessories and tool bits

etc.

etc.etc. in accordance with these instructions,

in accordance with these instructions,

in accordance with these instructions, in accordance with these instructions,

taking into account the working conditions

taking into account the working conditions taking into account the working conditions

Product specificaties

Merk:	Flymo
Categorie:	Heggenschaar
Model:	EasiCut 500

Heb je hulp nodig?

Als je hulp nodig hebt met Flymo EasiCut 500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Heggenschaar Flymo

Flymo EasiCut 5500 Handleiding

10 Oktober 2023

Flymo Easycut 450 Handleiding

10 Oktober 2023

Flymo EasiCut 510 Handleiding

10 Oktober 2023

Flymo EasiCut 7000XT Handleiding

10 Oktober 2023

Flymo Sabre Cut Handleiding

10 Oktober 2023

Flymo Easicut 420 Handleiding

10 Oktober 2023

Flymo EasiCut Cordless 420 Handleiding

10 Oktober 2023

Flymo Easycut 600 XT Handleiding

10 Oktober 2023

Flymo Easycut 6000 XT Handleiding

10 Oktober 2023

Flymo EasiCut 500 Handleiding

6 September 2023

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar

Proviel PVH 600 Handleiding

19 November 2024

Proviel PVHA 24 Handleiding

19 November 2024

Proviel PVH 660 Handleiding

19 November 2024

Proviel PVH 550 Handleiding

19 November 2024

Anova CG2660 Handleiding

17 November 2024

Sovereign SHT 550 Handleiding

16 November 2024

Gardenline GLH 690 Handleiding

16 November 2024

Gardenline GLHT 680 Handleiding

16 November 2024

Gardenline GLH 664 Handleiding

16 November 2024

Gardenline GLHT 551 Handleiding

16 November 2024