Flycam FLCM-FLN-PLA Handleiding

Flycam Statief FLCM-FLN-PLA

Lees hieronder de 📖 handleiding in het Nederlandse voor Flycam FLCM-FLN-PLA (5 pagina's) in de categorie Statief. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
What s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Flowline Placid 2 Axis Stabilizing Arm -(FLCM FLN PLA) - -
A s s e m b l y M a n u a l
Tensioner Spring
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Safety Shock Cord
2
Remove the hook from Flowline support
bar.
Take the cord bundle out from the cup and
pull the whole cord unl a cord lock comes
out.
SetupFlowline Placid
Separate the cord from cord lock and keep
the lock aside for aaching it back
aerwards.
Separate the cord also from the cup and
keep aside for mounng it back later.
Use a tool to unscrew small bolts that hold
the front pulley, from each side.
3
Mount front pulley in between the cord,
and pull the cord so that it goes back inside
the support arm. Again use tools to ghten
the bolts from each side and set the pulley
at its posion.
Turn the Placid Arm upside down. By using
an allen key, loosen the mounng bracket of
Arm. Now the bracket has enough space for
the cord to pass through it.
Insert cord into the mounng bracket. Make
sure that it is going exactly in the centre, up
into the hole of the Placid arm. Then Pull
the cord from boom of Placid arm, near
the spring, while sll holding it upside
down.
To x Placid arm at its appropriate posion,
aach one side of Safety Elasc Cord to a
knob on Placid arm. Then, drag the other
side of elasc cord across Flowline support
arm, and aach to the knob on other side
of Placid arm.
Now you can hold the Placid arm in its
standard posion. The cord is aptly set to
perform its funcon. By using an allen key,
ghten the mounng bracket of Placid Arm
with Flowline support arm.
Pull out the front pulley carefully, so it
doesn t drop into the Flowline support bar
and Insert the cord from the boom hole
and tug it out from the top hole.


Product specificaties

Merk: Flycam
Categorie: Statief
Model: FLCM-FLN-PLA

Heb je hulp nodig?

Als je hulp nodig hebt met Flycam FLCM-FLN-PLA stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Statief Flycam

Handleiding Statief

Nieuwste handleidingen voor Statief

Sony

Sony CIB-PCM1 Handleiding

22 November 2024
Sony

Sony VCT-R100 Handleiding

22 November 2024
Sony

Sony VCT-55LH Handleiding

22 November 2024
Sony

Sony GP-VPT1 Handleiding

22 November 2024
Sony

Sony RDP-CA3M Handleiding

22 November 2024
Sony

Sony VCT-FXA Handleiding

22 November 2024
Miller

Miller Air Handleiding

20 November 2024