Fluke iFlex i1730 Handleiding

Fluke Niet gecategoriseerd iFlex i1730

Lees hieronder de 📖 handleiding in het Nederlandse voor Fluke iFlex i1730 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 266 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
iFlex-1500-xx
iFlex-3000-xx
iFlex-6000-xx
Thin-Flexi Current Probe
Safety Information
To register your product, or to view, print, or download the latest
manual or manual supplement go to our website: www.fluke.com.
A Warning identifies hazardous conditions and procedures that
are dangerous to the user.
XW Warning
To prevent possible electrical shock, fire, or personal
injury:
Read all safety information before you use the
Product.
Use the Product only as specified, or the protection
supplied by the Product can be compromised.
Comply with local and national safety codes. Use
personal protective equipment (approved rubber
gloves, face protection, and flame-resistant clothes)
to prevent shock and arc blast injury where hazardous
live conductors are exposed.
Do not use the Product around explosive gas, vapor,
or in damp or wet environments.
Do not touch voltages >30 V ac rms, 42 V ac peak, or
60 V dc.
PN 4272192 (English)
September 2013 Rev. 1, 10/21
©2013-2021 Fluke Corporation. All rights reserved. Specifications are
subject to change without notice. All Product names are trademarks of
their respective companies.
Fluke Corporation
P.O. Box 9090
Everett WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
De-energize the circuit or wear personal protective
equipment in compliance with local requirements
before you apply or remove the Product.
Do not use the Product if it is damaged.
Do not use the Product if it operates incorrectly.
Before each use, examine the Product. Look for cracks
or missing pieces of the clamp housing or output cable
insulation. Also look for loose or weakened
components. Carefully examine the insulation around
the jaws.
Do not use the Flexible Current Probe if it has
damaged insulation, exposed metal, or if the wear
indicator is visible.
Do not use a current measurement as an indication
that a circuit is safe to touch. A voltage measurement
is necessary to know if a circuit is hazardous.
Have an approved technician repair the Product.
Remove the input signals before you clean the
Product.
Specifications
Safety ........................................... IEC 61010-1: Pollution degree 2
IEC 61010-2-032: CAT IV 600 V,
CAT III 1000 V
Temperature
Operating ............................... -20 °C to 70 °C (-4 °F to 158 °F)
Temperature of conductor under
test shall not exceed 80 °C (176 °F)
Storage ................................... -40 °C to 80 °C (-40 °F to 176 °F)
Altitude
Operating ...............................2000 m
Storage ................................... 12 000 m
Symbols
The table below is a list of the symbols that can be used on the
Product or in this document.
Symbol Description
»Consult user documentation.
WWARNING. RISK OF DANGER.
XWARNING. HAZARDOUS VOLTAGE. Risk of electric
shock.
TDouble insulation
¼
Measurement Category II is applicable to test and
measuring circuits connected directly to utilization
points (socket outlets and similar points) of the low
voltage MAINS installation.
½
Measurement Category III is applicable to test and
measuring circuits connected to the distribution
part of the building’s low-voltage MAINS installation.
¾
Measurement Category IV is applicable to test and
measuring circuits connected at the source of the
building’s low-voltage MAINS installation.
PConforms to European Union directives.
~
This product complies with the WEEE Directive
marking requirements. The affixed label indicates
that you must not discard this electrical/electronic
product in domestic household waste. Product
Category: With reference to the equipment types in
the WEEE Directive Annex I, this product is classed
as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this
product as unsorted municipal waste.

Product specificaties

Merk: Fluke
Categorie: Niet gecategoriseerd
Model: iFlex i1730

Heb je hulp nodig?

Als je hulp nodig hebt met Fluke iFlex i1730 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Fluke

Fluke

Fluke ii500 Handleiding

7 Oktober 2024
Fluke

Fluke iSee TC01A Handleiding

9 September 2024
Fluke

Fluke P5515 Handleiding

8 Juli 2024
Fluke

Fluke TiX885 Handleiding

7 December 2023
Fluke

Fluke TiX875 Handleiding

7 December 2023
Fluke

Fluke TiX880 Handleiding

7 December 2023
Fluke

Fluke TiX870 Handleiding

7 December 2023
Fluke

Fluke EI-162BN Handleiding

9 Augustus 2023
Fluke

Fluke CNX C3003 Handleiding

8 Augustus 2023
Fluke

Fluke 80i-2010s Handleiding

8 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Xblitz

Xblitz R8 Power Charge Handleiding

3 December 2024
Xblitz

Xblitz R4 Power Handleiding

3 December 2024
Franke

Franke Urban UBG 610-78 Handleiding

3 December 2024
Franke

Franke ANX211RHD Handleiding

3 December 2024
Franke

Franke ANX220 Handleiding

3 December 2024
Dell

Dell NX3330 Handleiding

3 December 2024
Dell

Dell PowerConnect B-DCX-4s Handleiding

3 December 2024
Hager

Hager AKB83000701 Handleiding

3 December 2024
Hager

Hager AKB81500402 Handleiding

3 December 2024
Hager

Hager AKBA1500401V Handleiding

3 December 2024