Fluke FEV300 Handleiding

Fluke Niet gecategoriseerd FEV300

Lees hieronder de 📖 handleiding in het Nederlandse voor Fluke FEV300 (15 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/15
FEV300
Electrical Vehicle Charging
Station Test Adapter
Users Manual
PN 5361878, May 2022
© 2022 Fluke Corporation. All rights reserved.
Specications are subject to change without notice.
All product names are trademarks of their respective companies.
1
Introduction
The FEV300 (the Product or test adapter) tests the functions and the safety
of charging stations mode 3 for AC charging. The adapter imitates a car and
opens up a charging cycle (activate voltage/current output). This adapter
allows you to conduct tests in combination with appropriate test instruments
like Installation Tester, multimeter and/or Scope Meters (oscilloscope). With
this adapter, charging stations can be tested in accordance with IEC/EN
61851-1 and IEC/HD 60364-7-722.
Symbols
Table 1. Symbols
Symbol Description
WWARNING. RISK OF DANGER.
XWARNING. HAZARDOUS VOLTAGE.
Risk of electric shock.
Consult user documentation.
JEarth
TDouble Insulated.
Measurement Category II is applicable to test and measuring
circuits connected directly to utilization points (socket outlets
and similar points) of the low-voltage MAINS installation.
PE PE Protective Earth.
CP CP Control Pilot.
Vehicles not requiring ventilation for indoor
charging areas.
Vehicles requiring ventilation for indoor charging areas.
This product complies with the WEEE Directive and its
marking requirements. The a󰀩xed label indicates that you
must not discard this electrical/electronic product in domestic
household waste. Do not dispose of this product as unsorted
municipal waste. For information about take-back and
recycling programs available in your country, see the Fluke
website.
Product Disposal
Dispose of the Product in a professional and environmentally appropriate manner:
• Delete personal data on the Product before disposal.
• Put the Product in the electrical waste.
2
Contact Fluke
Fluke Corporation operates worldwide. For local contact information, go to
our website: www.uke.com
To register your product, view, print, or download the latest manual or manual
supplement, go to our website.
Fluke Corporation Fluke Europe B.V
P.O. Box 9090 PO Box 1186
Everett, WA 98206 5602 BD EINDHOVEN
U.S.A. The Netherlands
Safety Information
A Warning identies conditions and procedures that are dangerous to the
user. A Caution identies conditions and procedures that can cause damage
to the Product or the equipment under test.
WX Warning
To prevent the possibility of electric shock or personal injury:
• Read all safety information before you use the Product.
• Do not alter the Product and use only as specied, or the
protection supplied by the Product can be compromised.
• Carefully read all instructions.
• Do not use the Product if it operates incorrectly.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
• Limit operation to the specied measurement category, voltage,
or amperage ratings.
• Do not exceed the Measurement Category (CAT) rating of
the lowest-rated individual component of a Product, probe,
or accessory.
• Comply with local and national safety codes. Use personal
protective equipment (approved rubber gloves, face protection,
and ame-resistant clothes) to prevent shock and arc blast injury
where hazardous live conductors are exposed.
• Do not operate the Product with covers removed or the case
open. Hazardous voltage exposure is possible.
• Do not use a current measurement as an indication that a circuit
is safe to touch. A voltage measurement is necessary to know if a
circuit is hazardous.
• Remove the input signals before you clean the Product.
• Use only specied replacement parts.
• Have an approved technician repair the Product.
• Do not use cable assembly if there is damage. Examine the cable
assembly for damaged insulation, exposed metal. Check cable
assembly continuity.
• Measure a known voltage rst to make sure that the Product
operates correctly.
• Do not use the Product around explosive gas, vapor, or in damp
or wet environments.
• Do not use the Product if it is altered or damaged.
• Examine the case before you use the Product. Look for cracks
or missing plastic. Carefully look at the insulation around the
terminals.
• Do not use cable assembly if they are damaged. Examine
the cable assembly for damaged insulation and measure a
known voltage.
• Use only accessory supplied with the Product.

Product specificaties

Merk: Fluke
Categorie: Niet gecategoriseerd
Model: FEV300

Heb je hulp nodig?

Als je hulp nodig hebt met Fluke FEV300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Fluke

Fluke

Fluke ii500 Handleiding

7 Oktober 2024
Fluke

Fluke iSee TC01A Handleiding

9 September 2024
Fluke

Fluke P5515 Handleiding

8 Juli 2024
Fluke

Fluke TiX885 Handleiding

7 December 2023
Fluke

Fluke TiX875 Handleiding

7 December 2023
Fluke

Fluke TiX880 Handleiding

7 December 2023
Fluke

Fluke TiX870 Handleiding

7 December 2023
Fluke

Fluke EI-162BN Handleiding

9 Augustus 2023
Fluke

Fluke CNX C3003 Handleiding

8 Augustus 2023
Fluke

Fluke 80i-2010s Handleiding

8 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Vitec

Vitec MGW Diamond-HX OG Handleiding

23 November 2024
Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Electrolux

Electrolux ZS70GL Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024
Stamos

Stamos S-PLASMA 60U Handleiding

23 November 2024