Fluke 80i-2010s Handleiding

Fluke Niet gecategoriseerd 80i-2010s

Lees hieronder de 📖 handleiding in het Nederlandse voor Fluke 80i-2010s (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
PN 5130594 June 2019
©2019 Fluke Corporation.
All rights reserved. Specifications are subject to change without notification.
All product names are trademarks of their respective companies.
80i-2010s
AC/DC Current Clamp
Instructions
Introduction
Use the Fluke 80i-2010s AC/DC Current Clamp (the Clamp or Product)
with oscilloscopes and digital multimeters and power analyzers for
accurate non-intrusive measurements of ac, dc, and complex waveform
currents.
Using advanced Hall Effect technology, the Clamp can accurately
measure currents up to 2000 A RMS. These features make it a powerful
tool for use in inverters, switch mode power supplies, industrial
controllers, automotive diagnostics, and other applications requiring
current measurements and/or waveform analysis.
Table 1 shows the Clamp.
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
• Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
• Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-921-0835
• Brazil: +55-11-3530-8901
• Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals.
Go to www.fluke.com to register your product and find more information.
Safety
A Warning identifies conditions and procedures that are dangerous to the
user.
XW Warning
To prevent possible electrical shock, fire, or personal injury:
• Read all safety information before you use the Product.
• Use the Product only as specified, or the protection
supplied by the Product can be compromised.
• Comply with local and national safety codes. Use personal
protective equipment (approved rubber gloves, face
protection, and flame-resistant clothes) to prevent shock
and arc blast injury where hazardous live conductors are
exposed.
• Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
• Examine the case before you use the Product. Look for
cracks or missing plastic. Carefully look at the insulation
around the terminals.
Table 1. 80i-2010s AC/DC Current Clamp
Item Description Item Description
Tactile Barrier DJaws
Zero Adjust EBattery Cover
Fastener
ON/OFF FBattery Cover
2
3
4
1
6
5
• Use Product-approved measurement category (CAT),
voltage, and amperage rated accessories (probes, test
leads, and adapters) for all measurements.
• Do not use test leads if they are damaged. Examine the
test leads for damaged insulation and measure a known
voltage.
• Before each use, examine the Product. Look for cracks or
missing pieces of the clamp housing or output cable
insulation. Also look for loose or weakened components.
Carefully examine the insulation around the jaws.
• Hold the Product behind the tactile barrier. See of
Table 1.
• Do not use the Product if it is damaged.
• Do not use the Product if it operates incorrectly.
• The battery door must be closed and locked before you
operate the Product.
• Remove all probes, test leads, and accessories before the
battery door is opened.
• Do not work alone.
• Do not exceed the Measurement Category (CAT) rating of
the lowest rated individual component of a Product,
probe, or accessory.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or
60 V dc.
• Have an approved technician repair the Product.
Table 2 shows symbols that can be used on the Product or in this
document.
Table 2. Symbols
Symbol Definition
WWARNING - RISK OF DANGER.
XWARNING. HAZARDOUS VOLTAGE. Risk of electric
shock.
Consult user documentation.
TDouble Insulated
,Application around and removal from uninsulated
hazardous live conductors is permitted.
Battery
)Certified by CSA Group to North American safety
standards.

Product specificaties

Merk: Fluke
Categorie: Niet gecategoriseerd
Model: 80i-2010s

Heb je hulp nodig?

Als je hulp nodig hebt met Fluke 80i-2010s stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Fluke

Fluke

Fluke ii500 Handleiding

7 Oktober 2024
Fluke

Fluke iSee TC01A Handleiding

9 September 2024
Fluke

Fluke P5515 Handleiding

8 Juli 2024
Fluke

Fluke TiX885 Handleiding

7 December 2023
Fluke

Fluke TiX875 Handleiding

7 December 2023
Fluke

Fluke TiX880 Handleiding

7 December 2023
Fluke

Fluke TiX870 Handleiding

7 December 2023
Fluke

Fluke EI-162BN Handleiding

9 Augustus 2023
Fluke

Fluke CNX C3003 Handleiding

8 Augustus 2023
Fluke

Fluke 80i-2010s Handleiding

8 Augustus 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Inglesina

Inglesina Front Handleiding

22 December 2024
Inglesina

Inglesina Newborn Winter Muff Handleiding

22 December 2024
Inglesina

Inglesina Stroller Winter Muff Handleiding

22 December 2024
Protector

Protector AS-5030.3 V2 Handleiding

21 December 2024
Sabrent

Sabrent AU-MMCW Handleiding

21 December 2024
Sabrent

Sabrent AU-2X35 Handleiding

21 December 2024
Sabrent

Sabrent CB-RS232 Handleiding

21 December 2024
Owon

Owon 500W Handleiding

21 December 2024
Owon

Owon 300W Handleiding

21 December 2024
Sabrent

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024